It was not a water surge, or hammer, or a blade turbine problem. The issue was higher than acceptable levels of vibrations for an extended period of time, which lead to fatigue in the floor and bolts which were holding down the turbine. This lead to an early catastrophic failure when the bolts gave way, allowing the turbine cover to be blown off and destroying the roof, then the actual turbine was also blown off of its foundation.
the problem was not a water surge. it was a a blade of a turbine that broke. spinning at 50000 rpm, it contained enough energy to blast through the whole concrete construction, only to be found 300 meters from the scene. the structural damage to the building caused water to flow in and kill the people inside
Hydro turbines do not spin at 50,000rpm. Most hydro turbines have a speed in the range of 60-300 rpm, with the rare ones getting up to 1000 rpm. The problem was many head cover bolts were not properly installed, and the ones that were, failed due to fatigue and stress fractures. If a blade broke off it would have simply passed through the draft tube.
They were probably running the generators at 140% maximum performance...
miklonish 2 months ago
how sad i live in moscow
russia
rishab120 3 months ago
how sad
rishab120 3 months ago
Bad electric effect fail out of the equipment and how effect cause local power goes off in the area. They people think something going on out there!
MIKEMASTER1A 8 months ago
HOT SEXY NEWS WOMAN!!!
MIKEMASTER1A 8 months ago
The cover and turbine "exploded" from the floor due to a pressure head just over 200 m.
wdprice3 1 year ago
It was not a water surge, or hammer, or a blade turbine problem. The issue was higher than acceptable levels of vibrations for an extended period of time, which lead to fatigue in the floor and bolts which were holding down the turbine. This lead to an early catastrophic failure when the bolts gave way, allowing the turbine cover to be blown off and destroying the roof, then the actual turbine was also blown off of its foundation.
wdprice3 1 year ago
This has been flagged as spam show
Free Energy is real and its here! The Oil companies are doing everything they can to stop this
information. If you want a Free energy machine , get the blueprints at LT-MAGNET-MOTORdotCOM , Join the
revolution!
baccaratbargaineq 1 year ago
more
turbospinning2009 1 year ago
maybe problem was "water hammer"
mlicanin1 2 years ago
we saw this in our mechanics class
the problem was not a water surge. it was a a blade of a turbine that broke. spinning at 50000 rpm, it contained enough energy to blast through the whole concrete construction, only to be found 300 meters from the scene. the structural damage to the building caused water to flow in and kill the people inside
chrism216 2 years ago
Hydro turbines do not spin at 50,000rpm. Most hydro turbines have a speed in the range of 60-300 rpm, with the rare ones getting up to 1000 rpm. The problem was many head cover bolts were not properly installed, and the ones that were, failed due to fatigue and stress fractures. If a blade broke off it would have simply passed through the draft tube.
sgtjayz 2 years ago
sneakytouchyyourplace
fuck you cocksucker motherfucker
ghandi92 2 years ago
74 people dead, 1 missing- final report....
sovietrat 2 years ago
Condolence to the families loosing their loveones.
hydeqs 2 years ago
vodka and technology dont mix.
sneakytouchyourplace 2 years ago
fuck you
melmelmelmelmelmable 2 years ago
fuck you cock sucker
sneakytouchyourplace 2 years ago
prolly insurance fraud or somethin
AreeYouSerious 2 years ago
A lot of people are found dead after the water was removed. Total number of casulties is 69 people (dead).
australisborealis 2 years ago
How many people are deeeed?
napone0 2 years ago
8 @ least
spellbound98 2 years ago