Another thing, I would feel confident putting hundreds of rounds through mine. Corrosive ammo just requires some dish soap and water to break down the salts. There is a reason why these guns still shoot straight after 70+ years, they are built like F'n tanks.
I put 400 rounds through my yugo SKS non chrome lined. took 20 minutes to clean. If your barrel is heavily pitted than it may take longer to clean. I agree with the others if it takes you 2 days to clean your rifle your doing something wrong.
this is a classic video on how new or non gun related people are miss informed and why they believe things that arent true. so to you sir i say thank you for dragging down what the gun community worked so hard to build.
If it takes you "2-3 days" to do something that takes others 20-30 mins then clearly you're doing something wrong.
It's safe to say that the Russians in Stalingrad didn't just stop in the middle of a firefight and say "Shit... That's 50... Hey guys I gotta clean my gun. See you 2-3 days. *To the Germans* Hey, I'm gotta go clean my gun so don't shoot at me for the next 2-3 OK?" and I would imagine they fired more than 50 rounds out of their weapons.
i think you are the only person on the face of the planet that cleans his gun all day. i clean my 1932 mosin in 20 minutes. i just spray powder blast down my barrel clean it and then spray it down with rem-oil i put 200 rounds through it last time i shout and didnt have a single problem no bolt sticking no nothing.cleaning a gun after 50 rounds is ridiculous unless shooing corrosive ammo. and if you use corrosive ammo just clean it really good and check it every day and clean as needed
Oh my gosh... Look guy, I have a 1929 Tula 91/30 and it doesn't take me more than an hour or so to completely dissasemble it and clean it... and it has never malfunctioned in the 1000+ rounds I've put out of it and the grouping doesn't change all that much. Crazy.
@jigbo1 damn strait. the guns were used in the war. wtf is the fun of shooting the gun if you spend so much time cleaning the damn thing? in the war, the best cleaning you would do was maybe run some water through the barrel, swab the barrel once real quick, and look at how they turned out. not shoot one bullet and sit there cleaning it so much. not like there's anything wrong with taking care of your guns. the guns were built to be abused, not treated like your newborn baby.
when you said you cleaned your Mosin from 2 to 10 one of the days I couldn't stop laughing. WTF were you doing the whole time, that is just crazy. This was one of the funniest videos i have seen in a long long time.
Yea, because the Russians only shot 50 rounds at the Germans then surrendered. All those rounds through there, hundreds and hundreds, and not always time to clean it in combat. My bore looks fine.
no way a rifle should take that long to clean. This was a WAR rifle and I dont think they spent all that much cleaning them. thisis a work horse of a rifle. I think you cleaning it all the time is an obsessive thing to keep yer guns very clean on your part.
Steps to Clean a gun first run a dry patch to remove the majority of the losse powder deoposite 2. Run a wet pad, 3 run a dry pad, 4 brush and run a dry pad. Repeat till barrel is squicky clean then you can use copper solevent and please run a wet pad and a dry pad before you use your brush after using copper solevent because you brush is copper and itll eat it up..
Sorry dude I clicked on this video so I could see what BS you had to say, I bet you never cleaned your brush, I bet thats why It was black all the time, also Coper Solevent is your best friend. I have never spent more than 30 minutes cleaning a gun, I even had a Mosin Nagant and we Shot 400 rounds 30 minutes of cleaning no crud, You need to clean more effieciently, the green color is you solvent and copper, blue is copper to.
If it took that long to clean a mosin, the russians would have NEVER commissioned them. The way you clean, you must have an arsenal of sewerpipes. Toolbox
your a F*CKING idiot. I just got a russian mosin nagant and it took 5 minutes with G9 cleaner/lube/protector that i ordered online. one pass with a wire brush then three passes with a cloth and it looked like it did when it was shipped to me. GOD YOUR STUPID!
To all the new shooters who stumble upon this video, DO NOT wire brush the bore as many times as this video suggests. One pass through with a wire brush is plenty and that gun better be very dirty to even need that. Good solvents and patches is all you need to clean and protect the rifling.
2 OR 3 days to clean? You must be licking the barell! That is just absurd. I shot 150+ rounds through mine yesterday, took it home, cleaned and it was ready to go in less than 30 minutes. You obviously are an inexperienced kid. Do you think a Russian soldier had 2 or 3 days to clean their gun? They probably were lucky to have 10 minutes. That is why these guns were designed... simplicity. Get a clue.
The only reason to clean it that good is to prep the barrel for moly coating. Use rubbing alcohol as a last step before laying down 3-4 coats of moly. This will help those older non chromed lined barrels last thousands of rounds,protect the barrel from rusting further,and make it easier to clean each time you shoot.
wow 20 times ? you'll ruin the bluing for repeatly "over clean" ! What I do I clean ? I use amonia,wipe with boresnake once , and oil it.Then it's all done and it shoot great. Or you can ask the Russian soldiers who fought in WW2, they do simple clean and they don't have time to clean repeat over and over .... Soldiers have to worry about staying alive :)
You can shoot as much corrosive ammo as you want in one session... just clean your rifles right when you get done!
I made the mistake of being lazy and waiting until the next day to clean my mosin... the bore was already showing rust! That was a wake up call for sure... at least this happened with the cheapest gun I own.
Anyways I cleaned & it still shoots alright. No harm no foul I guess... but I wouldn't risk doing it again! I cant imagine what it would have looked like after a week.
recently bought my first milsurp rifle (mosin M44).....patch of hoppes 9 up and down bore, decock bolt and take the lugs off, wipe down the firing pin (and bolt face) then oil, run a few dry patches down the bore till they come out clean. then an oily patch if you feel like it (just run a dry one through before you shoot it again) 10-15 mins tops, I used to be terrified of corrosive ammo before i started shooting it, its really not that bad at all my bore is still mirror after 700 rounds
wow... just wow... my nagant only takes me fifteen minutes to clean and that's after firing over 100 rounds through it in one day... freakin use hoppes no.9 powder solvent...
wow some one needs to tech you how to cleen it just take lots of hot hot hot water down the bore it will brake the carbin up and it will come right now make sher to dry it but yea
My bro cleaned a HORRID Mosin for a guy who had let the thing completely rust out and it took one sitting with the proper stuff. Sorry pal, I'll put 50+ rounds through my '43 Mosin and have her clean in ten minutes. Not a surplus find either, she's had 70 years of shooting. (P.S. , U.S.M.C. service rifles don't have chrome lined barrels; you might want to remind the Marines to clean their guns after every 30 rd mag)
Big misunderstanding here... This person is using an improper solvent for that bore. Such a solvent will actually corrode the steel in the barrel. Using the wrong solvent on an antique bore like that will cause the patches come out black time after time after time. Hoppe's #9 is a mild solvent. You clean a Mosin or Yugo SKS just like any other gun, just use a mild solvent. Make sure you do it soon after shooting to prevent corroding the bore.
U can tell he has no clue what the f he is doing because he uses "Foaming bore cleaner", he might have a hard time cleaning his bore because it is a octangon reciever, it has more than likely been shot with some cosmolin in the barrel so it is a pain in the ass to get that out just on its own or his bore is just pited to shit
Wait. NO. When shooting corrosive ammo (most 7.26x54r surplus) swab the barrel with fresh water before leaving the range and swab again with boiling water as soon as you get home. Otherwise, it will rust. Round count is irrelevant because as long as the barrel is hot it won't rust.
These rifles were designed, manufactured, and deployed during acts of war, and were "geared" to Eastern Bloc forces which were given to not cleaning their rifles very well, or indeed not at all. I shoot (10) Bulgarian, yellow tip surplus, and after 100/200 rounds it usually takes appx. 15-20 mins to clean the bore with hot water, Windex, Rim oil. Hasn't been a big deal to clean. I wonder if after cleaning for such a long time if much of your rifleing remains. thanks...enjoyed watching
What a fucking retard im sry but YOUR A FUCKING DUMB ASS COCK SUCKER. Ya it takes you 20 hours to stretch your asshole out to be able to jam your head up it!!
This is what's known as Gunsterbating. If you can't pronounce the name of the firearm, you have no business talking about it....how many rounds do you think went through those 91/30s before you got a hold of any of them?
I run one wet patch through for every round I shoot. And I run each patch through for one hour straight. So... if I shoot 100 rounds, that's 100 hours of cleaning. Now that's just with wet patches. Then I run dry patches through it until I can start seeing through the barrel. Not all the way through, just a little translucent. I've went through 3 barrels this year and have only shot 500 rounds so far. You think the Russians would have built them a little tougher. =(
It would be kinda sad if a weapon made for war and war alone was only able to shoot 50 rounds before NEEDING a cleaning. Takes me about 10 min to clean mine. Its called not being overly anal about a firearm that's lasted almost 70 years and cost $100.
I can tell you have no idea what you are talking about... I can strip, clean, and reassemble a weapon in less then 20 minutes. You just go overboard...
Just buy a damn bore snake. Cleaner 20 times, wire brush? In the Future plz don't try to give out information about things you really don't know about because I'm sure theres ppl out there doing this stupid kinda shit now too.
it literally took me 10 minutes to clean 200 rounds out of the barrel, bolt and mag well... You must not know what the hell youre doing with cleaning.
One of the best, most half assed ways to clean your bore is to run by autozone and buy a can of break cleaner. Pop the top and hose down your bore. I guarantee that after a few seconds your rifle wont even know the meaning of fouling!
You will need to run about half a dozen patches of oil down the bore through, as the method removes any and all trace of moisture and oil from any surface it contacts.
What you are experiencing is Humidity, and improper barrel lubrication. Get some barricade it works well for putting it in the closet for a long period of time.
I don't know about anyone else but when I take mine out shooting I usually run about 100 to 200 rounds through my mosin nagant 91/30 all I have to do is pour hot soapy water down the barrel then do my usuale cleaning routine and it's fine takes me like 5 or 10 minutes.
Once getting the cosmoline removed from the rifle they are built to be beaten. The bolt handle was specifically designed to be kicked open with boot, the main action spring is about 40 lbs (way more than enough for this caliber) and they gave it a metal butplate so when empty it turns into a brain basher. The thing was meant to be punished and it handles it just fine. Mine still shoots the same as when I bought it packed full of cosmoline.
@EnfieldGuy243 actually you need to get the cosmoline off. These rifles have been sittin in heavy packing grease for god knows how long give em a bath and treat em right dammit.
@EnfieldGuy243 Not if your shooting corrosive primed ammunition my friend ( which MOST of the surplus ammo is corrosive) That barrel will rust to shit in a month if its NOT cleaned properly ...
Get the bore wet with hoppes #9 then brush or just dry punch. Make sure you dry punch after each wet punch or brush. The brush is going to leave residue every time you stick it in there. Letting the copper solvent bore cleaner sit longer just gets your bore to corrode/disolve so it's always going to come out dirt letting it sit longer than suggested. Sweets is definately going to eat the iron bore. If the patch doesn't come out bluish your bore is clean.
You got gun problems, I feel bad for ya son! I got 99 problems but a gun ain't one! hahaha Dude, 20 hrs is rediculous, get a new mosin and check for pitting when you get it.
Dont forget to Scrub behind the ears. Use a new brush every time. or a bore snake but scrub and give it hell, use the crown protector so you can go fast.
But back on topic. I have two AR's without chrome lining. One in 5.56 and one in 7.62x39. I shoot hundreds of rounds through each every trip. Solvent through the bore. Run a brush through, Yank a bore snake through it. Oiled patch. Done. All that cleaning will wear the bore out faster than shooting it. You are a fucking idiot!
ogghhh and to make double sure i got all the Russian pecker skinning finger prints off the beast I took it down to gray and got a new stock. Left no doubt.....
I don't like to shoot a Mosin more than 20 rounds at a time .... and i like to spend like 3 minutes shooting some bore cleaner down the ole' beast. And since i cut he barrel down 7 inches with a 12 dollar cut off saw from HF... then lapped the crown in with a bronze screw and some left over lapping compound in about 43 minutes.... I think your 20 hours might be a touch to much.
THANK YOU!!!!..DO YOU THINK THOSE COMMIES WERE TAKING A 12 HOUR BREAK FROM THE WAR CLEANING THEIR RIFLE!!!..USE YOUR HEAD BRO..THATS LIKE POLISHING ALUMIUM WHEELS..YOU WILL GET OXIDIZIATION ON YOUR RAG POLISHING ..FOR THE NEXT 10 YEARS,,DOESNT MEAN THE WHEELS ARE STILL DIRTY... 15 MINUTES MAX..AND ITS BACK TO THE GUN SAFE..JUST MY .02!!!!!!!!
Are you using mil surp ammo or something ive never heard of that issue with a mosin but i would say brush the bore before you patch to loosen any fouling and probably cut your cleaning time by about 19-19.5 hours.
7.62x54R is actually $80.00-$90.00 for 440 rounds...
However by the time you shot 500rds through a Mosin in a day you would spend more than that on pain meds and a doctor putting your shoulder back where it's supposed to be.
Make a make-shift oven with two metal trash cans and a heating lamp through the top and put you mosin in it with NO AMMO in the gun, bolt out and the barrel down. Easiest way to clean a mosin.
Can you take this stupid ass video off LMAO i just got my mosin and have put 80 rounds every day for the past week. No fowling at all. Bore is as clean as a virgin!!!! WTF are you talking about?
im worried about the likes on this vid, this is clear he read the box on his beloved solvent,but has other guns,lol this is defenitly timmys first,and hes been up 12 hours a day watching gun porn,moms in bed,he wants to be a mam .take the fire arm back,very carefully.lol and go get a girlfriend,very carefully.hahahah defently dudes first gun.probably hasnt shot it yet and going cookoo.lol cant wait to share this for a laugh.
what an idiot.not even worth argueing with,hoppers 9,bore snake,rem oil a coat hanger and a snot rag ,with snot can do it in ten.lol shit.this kid squirms so much he either has to go potty or hes scared .two reosons why someone should take his rifle away and put it on top of the fridge till he can see over the top.hah!
Son, its a rifle not a prom dress. The corrosive salts are neutralized almost instantly on contact with hoppes 9 due to the large quantities of ammonia in it.
I've had a mosin nagant since I was 12, ( 7 years ago) I have shot countless rounds through it..and I have hardly ever cleaned it. It's like an AK if I wanted to I could run in through sand and clean my gun with a freakin boot lace and it would shoot excellently. ALSO are you smoking? I can DCOA mine with a DETAILED cleaning in like an hour - an hour and a half.
The longest I have EVER had to spend on cleaning ANY gun was an hour...You CAN DAMAGE A BORE WITH OVER CLEANING. Get some hoppes no.9, dip a brass brush in it and run it through the bore a few times, let it soak in the bore for a minute or so and run rem oil soaked patches through until it is comes out clean, then run 3 dry patches. Make sure you use windex or warm water ASAP when cleaning a gun that has used corrosive ammo (alot of cheap mosin ammo is corrosive). You have to dissolve the salts.
So at first I was concerned, I plane to buy a Nagant as a first gun due to budget restraints. But then he started talking and I'm like, what is this bullshit I don't even. He doesn't even sound confident in himself, and like he' trying waay too hard.
Twelve hours to properly clean this weapon? Average person could run 4 patches per minute, 240 per hour, 2880 for twelve hours, $3.99 per 100 ct. or $123.81 (includes tax). About 1/10 ounce of oil per patch, 288 ounces of oil which is 288 bottles at $1.50 each or $462.24 (includes tax). So every time you clean your $100 gun you spend $586.05
you are in need of some growing up and learning how to handle a firearm...you waste time on cleaning a gun bc you have nothing better to do in your grandmothers basement. i have yet to find a video of yours with any useful let alone correct information...just turn off your internet
ok maybe if the us army wanted you to clean it would take that long but just run a few patches and a bore brush through and its good... if your trying to get every damn pice of carbon out well good luck youll be there for ever, your nuts!
@LtSgt5 a cleaning swab soaked with water will disolve the corrosive salts, keep junning the wet patches through untill they are clean then run a few dry patches through until the barrel is dry and then I run an oily patch through to protect against rust, thats pretty much all there is to do for cleaning a mossin barrel.
i go out, and take my mosin, and bring about 50 rounds just for hitting 300yard+targets, and then, when my barrle is significantly heated up to where long range accuracy is n ow shit, i simply start shoot 1gallons at 50-100 yards, or shooting old road signs at 50 yards, just for shits'n'giggles, it is not unheard of for me to go though a entire spam can in a single sitting, and it takes me roughly 20-30 minutes to clean.uploader, learn to clean your firearms in a timely manner.
Try this: after shooting every fifty rounds, attatch a piece of 120 grit sandpaper to a bore rod and a high speed drill. Run a little cutting oil down the barrel while cleaning for no less than a minute between at least ten changes of paper. When finished, rinse out and run a patch through. 100% guaranteed clean barrel in 20 min tops. If you can look down the barrel and actually see the shine of a round you know you got it clean. Try this and let us know how it works out.
So what your saying is I shoot 100 rounds its gonna take me 12 hours to "properly " clean the bore of my $100 gun? Brake cleaner, hopps. #9 clean patch after 4. Done in 20 minutes. I've been doing it wrong this whole time?? All surplus ammo is corrosive because of the primer. Ammonia or Windex will simplify your process.
I'm sorry, did you say two or three DAYS?!?! I use Czech Surplus in my SKS (Not lined) and I shoot 100+ rounds through it and it takes 30-45 minutes. I think you need to learn how to clean your guns buddy
Wow, thanks for the info...I've got three of the 91/30 with more than 1500 rounds thru each. I've been doing it all wrong. Thanks again for the enlightenment!
i can put a good 300 down range and not have this problem , maybe its your ammo? do you buy standard issue russian military rounds? or wolf ammo, because it might be what ammo you use.
Lad, thousands and thousand of very dead germans would probably disagree with you. I've watched a couple of you videos, and for what they are and presume to be they are not bad. Yet you need to be sure you don't do things like this that make you look the complete fool. Certainly a chrome bore is nice and I have several and shot several in my many years in the military, but a basic bore is fine for shooting hundreds of rounds. It's just harder to clean.
The gun costs 80 bucks. Who cares? So the barrel fouls out... so what? Just buy another one! There's literally tens of millions of these old warhorses on the market and you can get 'em dirt cheap. A crate of rounds costs more than the gun!
Wow! You caught a lot of shit for this vid huh? Ik what you mean though. I put 60 rounds of surplus corrosive through mine when I first got it. It seemed like I was putting patches through it forever before they came out clean!
Shoot the gun, clean the gun... it's that easy. With corrosive ammo, as long as you get most of the burnt powder out of the barrel and off the bolt as soon as possible and keep some oil on it, it's not a problem. New ammo isn't a problem at all.
People complain all the time about corrosive ammo and would rather pay $1 per round for S&B (which is fine for hunting or long range practice). I pay 18 cents per round and become a better marksman with more practice ammo. Clean the damn rifle.
LOL. one round of non corrosive and it's time to clean the bore? Really? Are you really that Low-wattage of a child? And there is no reason to clean a rifle for days unless you're really doing it wrong.
you dumb fuck I put more than 1,000 rounds through my mosin nagant in a day, all well corrosive ammo, and i didnt clean it until the next day at night, my gun still shoots fine, perfectly fine. And I bought the gun for 100 dollars at cabelas. Im 14 and I know better than you, the proof about the 1000 rounds thing is on my channel, well it doesnt show all 1,000 rounds but at that point it was at the 500 range
It's also amazing how the military members who used these rifles shot way more than 50 rounds through them while fighting without cleaning them. What is really amazing about this is the amount of these firearms used in combat that have great bores... Geeeesh get educated a bit befor eyou make a video.
Honestly...if you've spent 12 hours cleaning that pipe out and wire brushing it that anally I'm guessing you've completely ruined the crown of that rifle.
you are extremly ocd, it takes me tops and hr to clean my mosin after shooting over 100+ rounds and thats includes taking everything aparting and polishing the wood, work smarter not harder....you make mosin folks look bad
does your mom know hat you have that rifle in her basement ? You go clean while everybody else shoots their rifles.
apcb6 12 hours ago
Another thing, I would feel confident putting hundreds of rounds through mine. Corrosive ammo just requires some dish soap and water to break down the salts. There is a reason why these guns still shoot straight after 70+ years, they are built like F'n tanks.
Jellyroll405 20 hours ago
Great now I'm taking "lessons" from a 12 y/o! Post vids once your other ball drops junior.
Jellyroll405 20 hours ago
lol a lot of yall are harsh, I know to many people who dont clean their guns properly. Nice lookin mosin!
MrStuffdude 2 days ago
I put 400 rounds through my yugo SKS non chrome lined. took 20 minutes to clean. If your barrel is heavily pitted than it may take longer to clean. I agree with the others if it takes you 2 days to clean your rifle your doing something wrong.
Dietzeeeee 2 days ago
this is a classic video on how new or non gun related people are miss informed and why they believe things that arent true. so to you sir i say thank you for dragging down what the gun community worked so hard to build.
mrblueagian 2 days ago
Are you sure you know how to clean a firearm?
If it takes you "2-3 days" to do something that takes others 20-30 mins then clearly you're doing something wrong.
It's safe to say that the Russians in Stalingrad didn't just stop in the middle of a firefight and say "Shit... That's 50... Hey guys I gotta clean my gun. See you 2-3 days. *To the Germans* Hey, I'm gotta go clean my gun so don't shoot at me for the next 2-3 OK?" and I would imagine they fired more than 50 rounds out of their weapons.
ThatOGDon 3 days ago 4
Comment removed
1722hmr 3 days ago
i think you are the only person on the face of the planet that cleans his gun all day. i clean my 1932 mosin in 20 minutes. i just spray powder blast down my barrel clean it and then spray it down with rem-oil i put 200 rounds through it last time i shout and didnt have a single problem no bolt sticking no nothing.cleaning a gun after 50 rounds is ridiculous unless shooing corrosive ammo. and if you use corrosive ammo just clean it really good and check it every day and clean as needed
mark16443 3 days ago
Oh my gosh... Look guy, I have a 1929 Tula 91/30 and it doesn't take me more than an hour or so to completely dissasemble it and clean it... and it has never malfunctioned in the 1000+ rounds I've put out of it and the grouping doesn't change all that much. Crazy.
jigbo1 3 days ago
@jigbo1 damn strait. the guns were used in the war. wtf is the fun of shooting the gun if you spend so much time cleaning the damn thing? in the war, the best cleaning you would do was maybe run some water through the barrel, swab the barrel once real quick, and look at how they turned out. not shoot one bullet and sit there cleaning it so much. not like there's anything wrong with taking care of your guns. the guns were built to be abused, not treated like your newborn baby.
zmbekillr 1 day ago
when you said you cleaned your Mosin from 2 to 10 one of the days I couldn't stop laughing. WTF were you doing the whole time, that is just crazy. This was one of the funniest videos i have seen in a long long time.
cjh8604 4 days ago
Yea, because the Russians only shot 50 rounds at the Germans then surrendered. All those rounds through there, hundreds and hundreds, and not always time to clean it in combat. My bore looks fine.
RENOGUY777 4 days ago 2
its a fuckin nagant! you can throw your gun in to a lake full of shit and it will keep on shooting and shooting and shooting.
southwick331 4 days ago
finger off the trigger Im 12 ad I know that
airsoftforlife6 4 days ago
k there
pjicleanair420 4 days ago
@CPLBSS88 agreed
GlockPunisher1 4 days ago
no way a rifle should take that long to clean. This was a WAR rifle and I dont think they spent all that much cleaning them. thisis a work horse of a rifle. I think you cleaning it all the time is an obsessive thing to keep yer guns very clean on your part.
GlockPunisher1 4 days ago
@GlockPunisher1 Yea no doubt. They told the opposing troupes to chill out so they could clean there mosins.
Glockwork9 4 days ago
@Glockwork9 TIME! TIME! We gotta clean our Mosins .... YEAH SEE YOU BACK HERE IN 20 HOURS OK!!?? ... OK!!
GlockPunisher1 4 days ago
Steps to Clean a gun first run a dry patch to remove the majority of the losse powder deoposite 2. Run a wet pad, 3 run a dry pad, 4 brush and run a dry pad. Repeat till barrel is squicky clean then you can use copper solevent and please run a wet pad and a dry pad before you use your brush after using copper solevent because you brush is copper and itll eat it up..
RanchhandTCR 5 days ago
Sorry dude I clicked on this video so I could see what BS you had to say, I bet you never cleaned your brush, I bet thats why It was black all the time, also Coper Solevent is your best friend. I have never spent more than 30 minutes cleaning a gun, I even had a Mosin Nagant and we Shot 400 rounds 30 minutes of cleaning no crud, You need to clean more effieciently, the green color is you solvent and copper, blue is copper to.
RanchhandTCR 5 days ago
If it took that long to clean a mosin, the russians would have NEVER commissioned them. The way you clean, you must have an arsenal of sewerpipes. Toolbox
sheepfinger 5 days ago
I.D.I.O.T. !!!!!!!!!!!!!!!!
Vocoder256 5 days ago
Does your mother know you're keeping guns in her basement?
074pdrake 5 days ago
wow.. i cant believe 18 people liked this video..
killerchris2003 5 days ago
your a F*CKING idiot. I just got a russian mosin nagant and it took 5 minutes with G9 cleaner/lube/protector that i ordered online. one pass with a wire brush then three passes with a cloth and it looked like it did when it was shipped to me. GOD YOUR STUPID!
SpecialK0789 6 days ago
To all the new shooters who stumble upon this video, DO NOT wire brush the bore as many times as this video suggests. One pass through with a wire brush is plenty and that gun better be very dirty to even need that. Good solvents and patches is all you need to clean and protect the rifling.
TBOR101 6 days ago
3:23 Wtf happened to your front sight its all crooked !
jeepyb 6 days ago
Is this video a joke ?
jeepyb 6 days ago
2 OR 3 days to clean? You must be licking the barell! That is just absurd. I shot 150+ rounds through mine yesterday, took it home, cleaned and it was ready to go in less than 30 minutes. You obviously are an inexperienced kid. Do you think a Russian soldier had 2 or 3 days to clean their gun? They probably were lucky to have 10 minutes. That is why these guns were designed... simplicity. Get a clue.
1960gambit 6 days ago
If I cleaned it with my piss it would take less than 2-3 days by far.
xxReaverXXCerberusxx 6 days ago
I hate uneducated kids that make videos..specially when they have no idea what their talking about..
Jaredliedahl 6 days ago
This has been flagged as spam show
Wow....12 hours. What? 20 hours...what? Cleaning every 100 rounds? WHAT
seanThree16 1 week ago
The only reason to clean it that good is to prep the barrel for moly coating. Use rubbing alcohol as a last step before laying down 3-4 coats of moly. This will help those older non chromed lined barrels last thousands of rounds,protect the barrel from rusting further,and make it easier to clean each time you shoot.
dejavu251 1 week ago
wow 20 times ? you'll ruin the bluing for repeatly "over clean" ! What I do I clean ? I use amonia,wipe with boresnake once , and oil it.Then it's all done and it shoot great. Or you can ask the Russian soldiers who fought in WW2, they do simple clean and they don't have time to clean repeat over and over .... Soldiers have to worry about staying alive :)
BlackSpade72 1 week ago
wow 2-3 days you are way overcleaning this gun a stripdown and clean only takes an hour max
rbilligmier 1 week ago
2-3 days? Are you cleaning it with used underwear son?
TheKaduke 1 week ago
@spartan765
You are retarded.
Just fyi.
Peacemaker1085 1 week ago
How to never handle a firearm, waving it all around! I just want to yank that thing out of his hands... Thumbs up if you agree.
RyumitsuHayabusa 1 week ago 19
even though i dont have a rifle it takes me 5 minutes tops to clean my mossberg 500
Slipknot2RIP 1 week ago
You can shoot as much corrosive ammo as you want in one session... just clean your rifles right when you get done!
I made the mistake of being lazy and waiting until the next day to clean my mosin... the bore was already showing rust! That was a wake up call for sure... at least this happened with the cheapest gun I own.
Anyways I cleaned & it still shoots alright. No harm no foul I guess... but I wouldn't risk doing it again! I cant imagine what it would have looked like after a week.
CornMakesWhiskey 1 week ago
recently bought my first milsurp rifle (mosin M44).....patch of hoppes 9 up and down bore, decock bolt and take the lugs off, wipe down the firing pin (and bolt face) then oil, run a few dry patches down the bore till they come out clean. then an oily patch if you feel like it (just run a dry one through before you shoot it again) 10-15 mins tops, I used to be terrified of corrosive ammo before i started shooting it, its really not that bad at all my bore is still mirror after 700 rounds
Milisurp 1 week ago
if it takes you that long to clean this rifle, then you should give them away
ggreazy870 1 week ago
wow... just wow... my nagant only takes me fifteen minutes to clean and that's after firing over 100 rounds through it in one day... freakin use hoppes no.9 powder solvent...
hambone307 1 week ago
What are you doing to clean this rifle? It should take 15 minutes if you do a outstanding job.
mcgilliam77 1 week ago
wow some one needs to tech you how to cleen it just take lots of hot hot hot water down the bore it will brake the carbin up and it will come right now make sher to dry it but yea
poopshootlicker 1 week ago
just hot wash it dude does not take verry long
poopshootlicker 1 week ago
My bro cleaned a HORRID Mosin for a guy who had let the thing completely rust out and it took one sitting with the proper stuff. Sorry pal, I'll put 50+ rounds through my '43 Mosin and have her clean in ten minutes. Not a surplus find either, she's had 70 years of shooting. (P.S. , U.S.M.C. service rifles don't have chrome lined barrels; you might want to remind the Marines to clean their guns after every 30 rd mag)
bitofsilence 1 week ago
Big misunderstanding here... This person is using an improper solvent for that bore. Such a solvent will actually corrode the steel in the barrel. Using the wrong solvent on an antique bore like that will cause the patches come out black time after time after time. Hoppe's #9 is a mild solvent. You clean a Mosin or Yugo SKS just like any other gun, just use a mild solvent. Make sure you do it soon after shooting to prevent corroding the bore.
yargerd 1 week ago
U can tell he has no clue what the f he is doing because he uses "Foaming bore cleaner", he might have a hard time cleaning his bore because it is a octangon reciever, it has more than likely been shot with some cosmolin in the barrel so it is a pain in the ass to get that out just on its own or his bore is just pited to shit
broward762 1 week ago
Go play your video games and leave the lessons to the old timers.
Please.
timstudio777 2 weeks ago 6
Wait. NO. When shooting corrosive ammo (most 7.26x54r surplus) swab the barrel with fresh water before leaving the range and swab again with boiling water as soon as you get home. Otherwise, it will rust. Round count is irrelevant because as long as the barrel is hot it won't rust.
mcadore 2 weeks ago
Holy fucking stupid. Do the world a favor and STFU.
Coverbuster 2 weeks ago
2 - 3 days? You have to be kidding me!
fijillian 2 weeks ago
2-3 days cleaning when you got 2 pussies where you arms should be.
dmcdevitt8 2 weeks ago
TRIGGER DISCIPLINE MUTHA FUCKA! YOU DON'T HAVE IT.
hobitopia 2 weeks ago
if i used your method of cleaning id never get to do any actual shooting
gdpiscopo 2 weeks ago
2-3 days???? ahaha, 1 hour of thorough cleaning. Non crome line, 1932 tula 91/30
Emeianoite 2 weeks ago
These rifles were designed, manufactured, and deployed during acts of war, and were "geared" to Eastern Bloc forces which were given to not cleaning their rifles very well, or indeed not at all. I shoot (10) Bulgarian, yellow tip surplus, and after 100/200 rounds it usually takes appx. 15-20 mins to clean the bore with hot water, Windex, Rim oil. Hasn't been a big deal to clean. I wonder if after cleaning for such a long time if much of your rifleing remains. thanks...enjoyed watching
scanpacker 2 weeks ago
DO NOT WATCH THIS VIDEO!!!!!! This guy is a fucking dumb ass!!!!
JEM1911lover 2 weeks ago
What a fucking retard im sry but YOUR A FUCKING DUMB ASS COCK SUCKER. Ya it takes you 20 hours to stretch your asshole out to be able to jam your head up it!!
harpow1158 2 weeks ago
LULZ!!!! I have never seen somebody soo gun-tarded. It must be from bathing in those solvent vapors for 2-3 days at a time.
Never make another vid, my side hurts like mother from laughing so hard
xXGrimmR666Xx 2 weeks ago
how the hell do you clean your gun? 12 hours to clean it once?
Dude what.
Noobpatty 2 weeks ago
get a life 2 days to clean i clen mine in about 20 mins lmao you need to learn what you are talking about bud
giftoflauren 2 weeks ago
lol, got a Mosin with a perfect bore...keep telling them jokes, son.
This is what happens when people buy guns without knowing anything about them
panzerwolf494 2 weeks ago
This is what's known as Gunsterbating. If you can't pronounce the name of the firearm, you have no business talking about it....how many rounds do you think went through those 91/30s before you got a hold of any of them?
TheVooDooReverend 2 weeks ago
jack-wagon!
DIESELSMOKN 2 weeks ago
A. I doubt you got the gun with the bore is perfect condition and your ridiculous cleaning regimen could not make it so. B. You're an idiot.
hardchaw 2 weeks ago
One more tip... you know the barrel is clean when you can fit a 410 2-3/4 shot shell in it. If a 3" fits, you've gone too far. =Þ
MarcoNoPolo 3 weeks ago
I run one wet patch through for every round I shoot. And I run each patch through for one hour straight. So... if I shoot 100 rounds, that's 100 hours of cleaning. Now that's just with wet patches. Then I run dry patches through it until I can start seeing through the barrel. Not all the way through, just a little translucent. I've went through 3 barrels this year and have only shot 500 rounds so far. You think the Russians would have built them a little tougher. =(
MarcoNoPolo 3 weeks ago
It would be kinda sad if a weapon made for war and war alone was only able to shoot 50 rounds before NEEDING a cleaning. Takes me about 10 min to clean mine. Its called not being overly anal about a firearm that's lasted almost 70 years and cost $100.
majgenpain 3 weeks ago
I can tell you have no idea what you are talking about... I can strip, clean, and reassemble a weapon in less then 20 minutes. You just go overboard...
lockwoodjace 3 weeks ago
Just buy a damn bore snake. Cleaner 20 times, wire brush? In the Future plz don't try to give out information about things you really don't know about because I'm sure theres ppl out there doing this stupid kinda shit now too.
borohockei33 3 weeks ago
clean your gun when its hot with sweets I mean hot and u will cut the time cleaning it by 3/4 or more.................yes it works
gracewthomas 1 month ago
it literally took me 10 minutes to clean 200 rounds out of the barrel, bolt and mag well... You must not know what the hell youre doing with cleaning.
xethanxflipsburgers 1 month ago
Or you could shoot non corrosive ammo and not be fucking retarded.
iNfx1 1 month ago
Oh, and you will still need to Windex the bore if you shot corrosive too....for some odd reason...trust me on that one...
Elementlmage 1 month ago
One of the best, most half assed ways to clean your bore is to run by autozone and buy a can of break cleaner. Pop the top and hose down your bore. I guarantee that after a few seconds your rifle wont even know the meaning of fouling!
You will need to run about half a dozen patches of oil down the bore through, as the method removes any and all trace of moisture and oil from any surface it contacts.
Elementlmage 1 month ago
im sure all the soldiers of the past follow your method when in combat
monsterman27 2 months ago
I shoot corrosive all the time. Household ammonia on the first patch, good scrubbing, then clean as usual.
TheHeretic2011 2 months ago
Run warm soapy water through the bore to dissolve the salts and then clean and lube as normal. What a f- tard!
socal2127 2 months ago
Please tell me this video is a joke. Sarcasm? something because you can't be serious. I really do hope noone watches this and takes you seriously.
smokybob63 2 months ago
ummmmm, its a mosin man not glass ........
jnb367 2 months ago
What you are experiencing is Humidity, and improper barrel lubrication. Get some barricade it works well for putting it in the closet for a long period of time.
matthewHizzle 2 months ago
I don't know about anyone else but when I take mine out shooting I usually run about 100 to 200 rounds through my mosin nagant 91/30 all I have to do is pour hot soapy water down the barrel then do my usuale cleaning routine and it's fine takes me like 5 or 10 minutes.
beerfan12 2 months ago
If it takes you 12 hours to clean a Mosin, does it take you 72 hours to clean an AR?
sjcalichad 2 months ago 2
I should have known not to watch this vid...to all of you new shooters, this vid is so full of bull shit...
CPLBSS88 2 months ago 25
Once getting the cosmoline removed from the rifle they are built to be beaten. The bolt handle was specifically designed to be kicked open with boot, the main action spring is about 40 lbs (way more than enough for this caliber) and they gave it a metal butplate so when empty it turns into a brain basher. The thing was meant to be punished and it handles it just fine. Mine still shoots the same as when I bought it packed full of cosmoline.
EnfieldGuy243 2 months ago
Try hops # 9 and a bore snake buddy ..... maybe 10-15 mins tops to clean it ...... knowledge is power ...
rarekind40 2 months ago
ITS A MILITARY RIFLE IT VIRTUALLY DOES NOT NEED CLEANED!!!!!!!!!! THEIR MADE TO BE BEATEN WORSE THAN AN UGLY STEPCHILD!!!!!!
EnfieldGuy243 2 months ago 2
@EnfieldGuy243 actually you need to get the cosmoline off. These rifles have been sittin in heavy packing grease for god knows how long give em a bath and treat em right dammit.
moshpitmachine 2 months ago
@EnfieldGuy243 Not if your shooting corrosive primed ammunition my friend ( which MOST of the surplus ammo is corrosive) That barrel will rust to shit in a month if its NOT cleaned properly ...
rarekind40 2 months ago
2-3 days to clean it.... absolutely ROFLMFAO! please refrain from making gun vids in the future.
421petey 2 months ago 21
BORESNAKE
nukehayes8346 2 months ago
Get the bore wet with hoppes #9 then brush or just dry punch. Make sure you dry punch after each wet punch or brush. The brush is going to leave residue every time you stick it in there. Letting the copper solvent bore cleaner sit longer just gets your bore to corrode/disolve so it's always going to come out dirt letting it sit longer than suggested. Sweets is definately going to eat the iron bore. If the patch doesn't come out bluish your bore is clean.
AH6OY 2 months ago
I know an armorer from ft benning who can probably do some major gunsmithing in that time,.
hmm maybe take a while soaking for the first cleaning.
bet this dude likes to watch molasses drip
hope he doesnt charge x the hour.
maybe his head needs soaking
I'm goin to the special video
hoochbear
wgaboy 2 months ago
Kid My 1906 7MM mauser dont take no 12 hrs to clean! Use some Hoppie's and learn what the hell your doing
MrDickfish 2 months ago
You got gun problems, I feel bad for ya son! I got 99 problems but a gun ain't one! hahaha Dude, 20 hrs is rediculous, get a new mosin and check for pitting when you get it.
Betweenhispaws3 2 months ago
Dude, if I were you I would delete this video and pretend I never posted it.
SingletonJason 2 months ago 2
Dont forget to Scrub behind the ears. Use a new brush every time. or a bore snake but scrub and give it hell, use the crown protector so you can go fast.
matthewHizzle 2 months ago
But back on topic. I have two AR's without chrome lining. One in 5.56 and one in 7.62x39. I shoot hundreds of rounds through each every trip. Solvent through the bore. Run a brush through, Yank a bore snake through it. Oiled patch. Done. All that cleaning will wear the bore out faster than shooting it. You are a fucking idiot!
Asmo6 2 months ago
ogghhh and to make double sure i got all the Russian pecker skinning finger prints off the beast I took it down to gray and got a new stock. Left no doubt.....
antilley2 2 months ago
I don't like to shoot a Mosin more than 20 rounds at a time .... and i like to spend like 3 minutes shooting some bore cleaner down the ole' beast. And since i cut he barrel down 7 inches with a 12 dollar cut off saw from HF... then lapped the crown in with a bronze screw and some left over lapping compound in about 43 minutes.... I think your 20 hours might be a touch to much.
antilley2 2 months ago
THANK YOU!!!!..DO YOU THINK THOSE COMMIES WERE TAKING A 12 HOUR BREAK FROM THE WAR CLEANING THEIR RIFLE!!!..USE YOUR HEAD BRO..THATS LIKE POLISHING ALUMIUM WHEELS..YOU WILL GET OXIDIZIATION ON YOUR RAG POLISHING ..FOR THE NEXT 10 YEARS,,DOESNT MEAN THE WHEELS ARE STILL DIRTY... 15 MINUTES MAX..AND ITS BACK TO THE GUN SAFE..JUST MY .02!!!!!!!!
TOMMYBOSTON508 2 months ago
I just trade mine after i shoot it, saves on cleaning supplies :p
mainecondor 2 months ago
Are you using mil surp ammo or something ive never heard of that issue with a mosin but i would say brush the bore before you patch to loosen any fouling and probably cut your cleaning time by about 19-19.5 hours.
gunmanchris1 2 months ago
The OCD is strong with this one! LOL
PalmettoStateForever 2 months ago
the beauty of the mosin nagant is when it fucks up and stops working, just go get another one
NEodRA6 2 months ago
who the fuck goes out and shoots 500 rounds.. thats alotta cash
NEodRA6 2 months ago
@NEodRA6
7.62x54R is actually $80.00-$90.00 for 440 rounds...
However by the time you shot 500rds through a Mosin in a day you would spend more than that on pain meds and a doctor putting your shoulder back where it's supposed to be.
Asmo6 2 months ago 3
@Asmo6 yea i actually bought a 440 round can for 85 for my 91/30.. ur rite u would be spending more money on pain meds hah
NEodRA6 2 months ago
Yeah you musta been ripped off buddy. Mosin barrels can handle just about anything. It's a goddamn battle rifle. This prick is lying.
Kiteboarder27 2 months ago
Make a make-shift oven with two metal trash cans and a heating lamp through the top and put you mosin in it with NO AMMO in the gun, bolt out and the barrel down. Easiest way to clean a mosin.
Playernamedgloves 2 months ago
Can you take this stupid ass video off LMAO i just got my mosin and have put 80 rounds every day for the past week. No fowling at all. Bore is as clean as a virgin!!!! WTF are you talking about?
pubgerm1 2 months ago
the gun will shoot until it rusts through...maybe in 2098
peaqe6662 2 months ago
Probably because you've got a crappy bore. Pitting holds fouling. Clean up time gives a pretty good indication of bore condition.
TurbodanNM 2 months ago
its a mosin, if it fucks up buy another one.
DRprofessorBOOTY 2 months ago
im worried about the likes on this vid, this is clear he read the box on his beloved solvent,but has other guns,lol this is defenitly timmys first,and hes been up 12 hours a day watching gun porn,moms in bed,he wants to be a mam .take the fire arm back,very carefully.lol and go get a girlfriend,very carefully.hahahah defently dudes first gun.probably hasnt shot it yet and going cookoo.lol cant wait to share this for a laugh.
newb1912 2 months ago
what an idiot.not even worth argueing with,hoppers 9,bore snake,rem oil a coat hanger and a snot rag ,with snot can do it in ten.lol shit.this kid squirms so much he either has to go potty or hes scared .two reosons why someone should take his rifle away and put it on top of the fridge till he can see over the top.hah!
newb1912 2 months ago
Son, its a rifle not a prom dress. The corrosive salts are neutralized almost instantly on contact with hoppes 9 due to the large quantities of ammonia in it.
JonDEden 2 months ago
I've had a mosin nagant since I was 12, ( 7 years ago) I have shot countless rounds through it..and I have hardly ever cleaned it. It's like an AK if I wanted to I could run in through sand and clean my gun with a freakin boot lace and it would shoot excellently. ALSO are you smoking? I can DCOA mine with a DETAILED cleaning in like an hour - an hour and a half.
eminempkr 2 months ago
The longest I have EVER had to spend on cleaning ANY gun was an hour...You CAN DAMAGE A BORE WITH OVER CLEANING. Get some hoppes no.9, dip a brass brush in it and run it through the bore a few times, let it soak in the bore for a minute or so and run rem oil soaked patches through until it is comes out clean, then run 3 dry patches. Make sure you use windex or warm water ASAP when cleaning a gun that has used corrosive ammo (alot of cheap mosin ammo is corrosive). You have to dissolve the salts.
haman2486 2 months ago
yeah, im sure the guys fighting in stalingrad cleaned their mosin's religiously after only 50 rounds...thumbs down
pdivizzle0112 3 months ago
@pdivizzle0112 I was thinking the same thing myself.
"Well, I had a perfect shot at a Nazi, but I already shot 50 rounds so I decided to clean my gun instead."
jjsjeffjjsjeff 2 months ago
I use a bore snake in 30. caliber with Rem oil. About 1 minute does it.
gregoryjamesaustin 3 months ago
really? I call bullshit, it takes no more than an hour to clean a gun with hoppes no.9, what are you using?
motlencore89 3 months ago
So at first I was concerned, I plane to buy a Nagant as a first gun due to budget restraints. But then he started talking and I'm like, what is this bullshit I don't even. He doesn't even sound confident in himself, and like he' trying waay too hard.
xShazamboobam 3 months ago
2-3 days to clean it? o.O you're doin' it wrong son...
pokapokapika 3 months ago
hes running his mosin with the 1 solvent
NINJAMUFFINS80 3 months ago
Anyway someone post a video how to quickly clean a Mosin-Nagant?
legendmove 3 months ago
It takes you all day because you don't know how to clean a gun.
BleedingBullets4U 3 months ago
Twelve hours to properly clean this weapon? Average person could run 4 patches per minute, 240 per hour, 2880 for twelve hours, $3.99 per 100 ct. or $123.81 (includes tax). About 1/10 ounce of oil per patch, 288 ounces of oil which is 288 bottles at $1.50 each or $462.24 (includes tax). So every time you clean your $100 gun you spend $586.05
alecia1959 3 months ago
Yer gonna scrub the rifling right outta that bore, kid.
Thrawnization 3 months ago
12 hours for 20 patches??
cbsyamaha 3 months ago
you are in need of some growing up and learning how to handle a firearm...you waste time on cleaning a gun bc you have nothing better to do in your grandmothers basement. i have yet to find a video of yours with any useful let alone correct information...just turn off your internet
bigtallguyzack 3 months ago
Dude you can shoot an AK forever without having to clean it...fail
1024ceejay 3 months ago
Stupid FUCKING IGNORANT BEETCH, IN SOVIET RUSSIA, THE NAGANT MAKES YOU ITS BEETCH!! Happy Sore Assholes Everyone!
tylerfocht90 3 months ago
441 videos of bullshit. and over 1800 people sub to this idiot. omg
MrUtubegunner 3 months ago
ok maybe if the us army wanted you to clean it would take that long but just run a few patches and a bore brush through and its good... if your trying to get every damn pice of carbon out well good luck youll be there for ever, your nuts!
Jake9123 3 months ago
12 hours over 3 days? What are you using to clean it? Individual strands of human hair?
HauptmannRob 3 months ago 28
cleaning my mosin takes about 10 minutes
wild50gunner 3 months ago 14
@wild50gunner less then that if your really in a hurry
Waynside 2 months ago
@wild50gunner how do you clean it?
LtSgt5 2 months ago
@LtSgt5 a cleaning swab soaked with water will disolve the corrosive salts, keep junning the wet patches through untill they are clean then run a few dry patches through until the barrel is dry and then I run an oily patch through to protect against rust, thats pretty much all there is to do for cleaning a mossin barrel.
wild50gunner 2 months ago
@wild50gunner
i go out, and take my mosin, and bring about 50 rounds just for hitting 300yard+targets, and then, when my barrle is significantly heated up to where long range accuracy is n ow shit, i simply start shoot 1gallons at 50-100 yards, or shooting old road signs at 50 yards, just for shits'n'giggles, it is not unheard of for me to go though a entire spam can in a single sitting, and it takes me roughly 20-30 minutes to clean.uploader, learn to clean your firearms in a timely manner.
CopperLeagueGaming 1 month ago
Using surplus ammo and clean time = 10 or 20 minutes top
45Biggamehunter 3 months ago
Try this: after shooting every fifty rounds, attatch a piece of 120 grit sandpaper to a bore rod and a high speed drill. Run a little cutting oil down the barrel while cleaning for no less than a minute between at least ten changes of paper. When finished, rinse out and run a patch through. 100% guaranteed clean barrel in 20 min tops. If you can look down the barrel and actually see the shine of a round you know you got it clean. Try this and let us know how it works out.
ptrckfx669 3 months ago
vasily did not kill 800 ppl by stopping to clean every 50 rounds. he's the real expert.
joker9494949494 3 months ago
So what your saying is I shoot 100 rounds its gonna take me 12 hours to "properly " clean the bore of my $100 gun? Brake cleaner, hopps. #9 clean patch after 4. Done in 20 minutes. I've been doing it wrong this whole time?? All surplus ammo is corrosive because of the primer. Ammonia or Windex will simplify your process.
jentom1971 3 months ago
greenish blue? what?
OEFvet1986 3 months ago
I'm sorry, did you say two or three DAYS?!?! I use Czech Surplus in my SKS (Not lined) and I shoot 100+ rounds through it and it takes 30-45 minutes. I think you need to learn how to clean your guns buddy
308Sharpie 3 months ago
Yeah bro, these rifles were never designed to fire more than 50 rounds without cleaning it..........................
MuscIeBound 3 months ago
I can effectively clean my mosin in about 20 minutes. Hot water, windex if you're paranoid, water again, and rem-oil... done.
Chrismayo1981 3 months ago
Wow, thanks for the info...I've got three of the 91/30 with more than 1500 rounds thru each. I've been doing it all wrong. Thanks again for the enlightenment!
Poppys1963 3 months ago
You spent 12 hours because you don't know what you are doing.... stop bitching and look up a cleaning video...
SuperAUTOcar 3 months ago
i can put a good 300 down range and not have this problem , maybe its your ammo? do you buy standard issue russian military rounds? or wolf ammo, because it might be what ammo you use.
thecoolface123 3 months ago
Lad, thousands and thousand of very dead germans would probably disagree with you. I've watched a couple of you videos, and for what they are and presume to be they are not bad. Yet you need to be sure you don't do things like this that make you look the complete fool. Certainly a chrome bore is nice and I have several and shot several in my many years in the military, but a basic bore is fine for shooting hundreds of rounds. It's just harder to clean.
MrSixthScents 3 months ago
The gun costs 80 bucks. Who cares? So the barrel fouls out... so what? Just buy another one! There's literally tens of millions of these old warhorses on the market and you can get 'em dirt cheap. A crate of rounds costs more than the gun!
Jiffypistol 3 months ago
Wow! You caught a lot of shit for this vid huh? Ik what you mean though. I put 60 rounds of surplus corrosive through mine when I first got it. It seemed like I was putting patches through it forever before they came out clean!
DoctorGarbo 3 months ago
Shoot the gun, clean the gun... it's that easy. With corrosive ammo, as long as you get most of the burnt powder out of the barrel and off the bolt as soon as possible and keep some oil on it, it's not a problem. New ammo isn't a problem at all.
People complain all the time about corrosive ammo and would rather pay $1 per round for S&B (which is fine for hunting or long range practice). I pay 18 cents per round and become a better marksman with more practice ammo. Clean the damn rifle.
FearTheGremlin 3 months ago
God forbid this guy ever buy an AR-15. He will probably spend a year cleaning it after shooting his first five round group out of it.
Arkanix420 3 months ago
LOL. one round of non corrosive and it's time to clean the bore? Really? Are you really that Low-wattage of a child? And there is no reason to clean a rifle for days unless you're really doing it wrong.
anth4484 3 months ago
you dumb fuck I put more than 1,000 rounds through my mosin nagant in a day, all well corrosive ammo, and i didnt clean it until the next day at night, my gun still shoots fine, perfectly fine. And I bought the gun for 100 dollars at cabelas. Im 14 and I know better than you, the proof about the 1000 rounds thing is on my channel, well it doesnt show all 1,000 rounds but at that point it was at the 500 range
Timespartan111 3 months ago
lol. this gun shot shit ammo all through ww2 with only pissing on it to clean. what a phaggot.
askikr79 3 months ago
It's also amazing how the military members who used these rifles shot way more than 50 rounds through them while fighting without cleaning them. What is really amazing about this is the amount of these firearms used in combat that have great bores... Geeeesh get educated a bit befor eyou make a video.
Archer46176 3 months ago
It's just amazing how many people can put things on youtube when they are so mis informed...
Archer46176 3 months ago
You do know that scrubbing and polishing the shit out of antique's, depreciates their value considerably....right?
RottenTreat 4 months ago
Honestly...if you've spent 12 hours cleaning that pipe out and wire brushing it that anally I'm guessing you've completely ruined the crown of that rifle.
IcabodCrane 4 months ago
you are extremly ocd, it takes me tops and hr to clean my mosin after shooting over 100+ rounds and thats includes taking everything aparting and polishing the wood, work smarter not harder....you make mosin folks look bad
mullin856 4 months ago