Please don't take this advice. I don't mean to be rude but this is not how you're supposed to finish a wall. As a finisher you never thin out your tape coat, second coat is with a 8-10" knife. You want to fill the space beyond the beveled edges of the drywall. I do slightly thin out my third coat of mud and skim over the second coat with a 12" knife. The way he did this I guarantee he has all those golf-ball-like dimples in the finish because of air pockets. Just a thought
first of all he shoud have a 8 or 10 inch knife to coat the seam.....not the 5 or 6 inch and that down splat to put the mud on..no no no..don't watch this and think you can do it try to find a real Drywaller..
@... v...v... Are you a real drywaller? If not stop hating!!! I've seen real drywallers work and they just use more job specific equipment but the result is still the same as his. Low life hater!!!
I am using joint compound which I imagined is the mud.You keep saying to a sour cream consistency should I add water to it or powder compound.The tape keeps slipping down.and its really necessary to use different size of knife for each coat and do I really need three coats.Thanks
Thanks for the video. I have a wall where the sheetrock finisher did not taper the coats out past the bevels so you can see the actual bevels. This wall is already painted. How can you fix this? I also have some areas in a vaulted ceiling where the mud has fallen out and the paper tape is coming loose from the joint (11 yo house). How do I fix this? Pull the tape out and retape and remud?
@Garynoles You will have to remud that joint and feather it out like it should have been done.You will find that because the wall is painted you will probably get tinny air bubbles appearing in the mud try mixing a drop of liquid dish soap to your mud and apply thin coats it usually will minimize the bubbles.As for the ceiling cut out or pull out the loose tape and re-do areas.Thanks for watching.If you have any other questions try my forum on the web site.
I appreciated the clarity of instructions. I have one question if you are taping with mesh how do you do the corners? I would love to have some advice from you.
@thilene I never use mesh tape myself, but I would say it would be a nightmare to use in inside cornors. It is not creased like paper tape so it would be difficult to use.I would stick to paper tape! If you have anymore questions please try our forum on our website. thanks
Thank you. Very helpful. I asked several people about their thoughts on that fiber tape or just tape. I prefer the tape. Fiber didn't work out the best...Snagged it once and made a mess. Although some people have mentioned applying mud let its sit for the day, apply second coat with tape and then the same steps as you...better or worse?
@smellyodelly Wow! worse for sure. If you apply a layer of mud first and let it dry ,then apply the tape you are just building it up even more .You want your tape as close to the surface of the drywall as possible to get the best looking job . The only time you might apply mud first and let it dry is if you are pre-filling some bigger gaps between the sheets. (1/2)
@smellyodelly And then you are just filling the gap not building the mud up on the surface of the drywall.And yes stick with the paper tape, as you have found the mesh tape is not the best.If you have other questions go post them on my web site forum please and give it a try.Thanks (2/2)
I wish I had seen this video 35 years ago, when I was first learning. Mostly I taught myself with trial and error, and no instruction. Ultimately I came to use the same technique that you use, and I find it funny that you gave away all my hard earned tips in one easy lesson. You've made a great video.
I used this as a first time drywall-er, worked out very well, but still somewhat in the dark about inside corners, 3rd coat. I'm guessing corner trowel cannot be used for that one.
@Dwyer084 I personally don't use a corner trowel myself. I used it because I thought it maybe makes it easier for first timers. Usually one pass w/it would be enough. If not use a 6" knife to fix it up a bit. We have started a forum on our web site, if you have anymore questions try it out.
@Dwyer084 I personally don't use a corner trowel myself. I used it because I thought it maybe makes it easier for first timers. Usually one pass w/it would be enough. If not use a 6" knife to fix it up a bit. We have started a forum on our web site if you have anymore questions try it out.
I commented a while back about the "decorative" pieces in the corners of the rooms in my house. I pulled some back and they aren't taped under them. The problem is some only have a small gap between the drywall but some have gaps up to half and inch or more. Can I still mud those without much trouble? And will paint on the wall keep the mud from sticking properly to the walls? Thanks for any help!
@HasteKilled Hi,well here is the scoop,use some stiffer drywall mud to prefill the gaps .I use mud right out of the box/pail before I have thinned it down with water.Then mud and tape it like usual.As for the paint on the walls there is no problem with the mud adhering to it but what will usually happen is you will get a lot of tiny pin holes in the mud because the moisture in the mud can not soak into the drywall paper. (1/2)
@HouseImprovements Thanks for the reply. A friend of mine who seen the gaps recommended that I get some metal corner bead because the gaps are really bad and all the way around the walls of the house. Going to pick some up in the next day or to. Otherwise I'd just be wasting a ton of money on mud. The gaps are even worse than I first thought. Not sure what they were thinking when building this house. Thanks again for the replies. You've been a bigger help than you might think!
@HasteKilled The water creates tiny air bubbles that come to the surface and leave a bunch of tiny holes that you need to skim coat again.Adding a drop of liquid dishwashing soap to the mud in your tray and mixing it in seems to help reduce them. Hope that helps you out. (2/2)
@ProzacPreacher I do not and am not sure why you would? The corners on a good trowel will flex as you apply pressure where you need it as you draw it along your mud.
I'm moving into a house with these "decorative" type corner pieces in every corner of every room and I was wondering if you would suggest getting profession help instead of trying it myself. They are in every inside corner and along the tops of the walls where they meet the ceiling. I don't even know what these are and they look poorly done since they are nailed on. But it's really bad looking. Haha! There are 6 rooms done this way so it will be a lot of work if they are tapered underneath.
@HasteKilled So I'm assuming this was put there because the last person didn't want to mud the inside corners. Well I would first pull a couple off and see whats back there. If the corners are not already taped and mudded give it a try and see how you make out. You can always hire someone later if you find you can't do it.
@HouseImprovements Thanks for the input. Getting ready to head over there now. And this is what I'm afraid of. Hopefully they are taped underneath. But if not, I'm up for trying it myself. Thanks again for the response!
Thanks for the video! Your instructions about the 'butt' and 'bevel' seams were very helpful, that's what I've been looking for! Is it ok for the tape to overlap at 'intersections', or should it not overlap? If you are looking for new how-to's, I haven't found a video to install and mud an arch (flex) bullnose cornerbead.
@2001Sunshine Over lapping the tape is fine. Keep watching for our "installing bullnose corner bead on corners and arches" video. Thanks for the input.
Thank you, thank you, thank you!! I have been attempting to mud my house for sometime now - quite unsuccessfully. We were just about to hire someone when I watched your videos and attempted it again (inside a closet this time), and while you still make it look so much easier than it actually was, having good instruction made all the difference!!! I'm on to the second coat tomorrow and sure that this time we will end up with finished walls! Impressive, well detailed videos. Thanks again!!
Thanks, starting my kitchen tomorrow and although most of the seems will be hidden behind cupboards, I still feel better prepared now to tackle he job - cheers.
okee dokee....watched your videos and now it's time for this mom to head off to the basement to give this a shot! Thanks for taking the time to share the video.
I wish you could spend more time on inside corners. I'm really having a problem with that. It's taking me way too long to do it my way. Especially in the corners.
@calism23 Inside corners are tricky and will take time, practice and patience. It is all about being able to control the angle of your drywall knife consistently while coating the tape.
I've been studying part 1 and 2 for a current project. Over the years I haven't done enough taping yet to figure it out on my own, so from what you've shown here, I was immediately able to successfully apply several new techniques I have been lacking until now. For me, this is the best video I've found on the subject.
Thanks for the clear and no nonsense video. I wish my husband could teach with this approach. We had to take down the bathroom ceiling for a plumbing problem, we put up the drywall then my husband had to leave on business for 3 days, upon his return he was surprised to see a perfect ceiling COMPLETE with paint. He asked who helped me with the mudding I told him my good friend Shannon! Thanks again.
I love how clear and plain you are, as well as little things like the remark that it's okay if some of the mud falls to the ground, as it is cleanable. You've got me seeing it as less of a chore and more of a new skill that I'm eager to practice.
Great video and great teacher! My husband and I are avid DIYers and always rely on the web for information but we typically need to watch multiple videos or visit multiple sites to get a good grasp on how to do something. You were so thorough and provided so much detail that we feel ready to tackle the taping and mudding with confidence. Thanks!
I for one really did appreciate your no nonsense approach in demonstrating the details of taping and mudding. Your video did what so many other video's have failed to do, and that is you get more down to earth and more detailed about each step and each aspect of the job. It is the little things that help greatly. Thanks!
this is great, I gotta Sheetrock my whole house very shortly, and this helps alot, the angles, and tricks, and the bucket, LOL, I would have used a bowl, hahahha, what you have looks handy :)
Well I am not an expert but I wish I had found this ages ago! I was going to hire someone to finish the job for me. I listened to many that claimed to know what they were talking about and just ended up frustrated. I kept getting told, "why can you not understand how to do this, you are a cake decorater you should have this"That is NOT true.... This is truley an art which I am now convinced to semi master. I am actually back in my bathroom giving it another go! Thanks Shannon!
@noth8nx Good question! A butt joint is the joint created when you butt the ends of two sheets together and a bevel joint is created when you are butting the two long edges of sheets together. The longer edges come with a factory tapered edge that is easier to mud and does not need as much work to make it flat when finished.
Very helpful, thank you!! The video is very clear and precise. You have turned my drywall nightmare into something I just may be able to accomplish. Thanks again.
Point up or punch out is when you correct what ever finish imperfections is on the wall after you prime the walls. Usually you would use a lamp or hologan lamp to see what ever it is you need to correct before painting. Thats normally done if your walls are slick finish, but if your going to texture your walls, (knock down, orange peel, or heavy splatter.) than you can skip that part but you should always double check your work.
@GeoFranco73 Thanks for clarifying your terminology,I had not heard those ones here before.Just to be clear I always sand out using a trouble light with a 150 watt bulb then I prime.Priming always makes any imperfections jump out.I then check everything again w/light and usually find the odd pin hole patch (Small bubbles) or maybe an missed edge or flashing screw.
@GeoFranco73 Anything I must repair I do with some mud laced with a bit of yellow food coloring to make it easy to find if the primer was white.If the paint is to be low sheen then anything minor will almost never show, but semi-gloss takes some extra care you are right.There are many tricks to be learned with experience when mudding because as you and I both know it really is an art! Thanks for your comments.
The video is very informative, but unfortunately you are not giving us the right information.I have been in the drywall business for 13 years and I'm positive you had alot of issues in that bathroom as far as point up is concerned, especially if you painted that bathroom with a semi gloss paint which is the norm. I'm sure you know exactly what I'm talking about but keep trying, you'll get it eventually.
This was an awesome 2 part tutorial. Thanks!
mrmartyac1 3 days ago
Nice one :-)
screat39 1 week ago
this has been really helpful. because i'm in high school and i needed to learn how to finish drywall. thanx for the help!
littlefreak8 1 week ago
Please don't take this advice. I don't mean to be rude but this is not how you're supposed to finish a wall. As a finisher you never thin out your tape coat, second coat is with a 8-10" knife. You want to fill the space beyond the beveled edges of the drywall. I do slightly thin out my third coat of mud and skim over the second coat with a 12" knife. The way he did this I guarantee he has all those golf-ball-like dimples in the finish because of air pockets. Just a thought
FFContracting 1 week ago
that corner trial...no way that is like back in the early 1900'z....lol
TurboDLT 1 week ago
first of all he shoud have a 8 or 10 inch knife to coat the seam.....not the 5 or 6 inch and that down splat to put the mud on..no no no..don't watch this and think you can do it try to find a real Drywaller..
TurboDLT 1 week ago
@... v...v... Are you a real drywaller? If not stop hating!!! I've seen real drywallers work and they just use more job specific equipment but the result is still the same as his. Low life hater!!!
robinsonjd1978 2 weeks ago
15 years!!! Wow has anyone seen how real drywallers work???
mclauch11 3 weeks ago
I am using joint compound which I imagined is the mud.You keep saying to a sour cream consistency should I add water to it or powder compound.The tape keeps slipping down.and its really necessary to use different size of knife for each coat and do I really need three coats.Thanks
sebasamy13 1 month ago
Great video thanks! I learned a lot in 20 mins well worth it
joelllamas69 1 month ago
Perfect
nicwells007 1 month ago
Excellent video advice and skill! This is just what I needed to redo my restroom. Thank you so much!
curcuitmike 1 month ago
Thanks
christopherclark1980 1 month ago
Thank you.
elarson77 1 month ago
you name is shannon
DestroyAllorNothing 1 month ago
Thanks for the video. I have a wall where the sheetrock finisher did not taper the coats out past the bevels so you can see the actual bevels. This wall is already painted. How can you fix this? I also have some areas in a vaulted ceiling where the mud has fallen out and the paper tape is coming loose from the joint (11 yo house). How do I fix this? Pull the tape out and retape and remud?
Garynoles 1 month ago
@Garynoles You will have to remud that joint and feather it out like it should have been done.You will find that because the wall is painted you will probably get tinny air bubbles appearing in the mud try mixing a drop of liquid dish soap to your mud and apply thin coats it usually will minimize the bubbles.As for the ceiling cut out or pull out the loose tape and re-do areas.Thanks for watching.If you have any other questions try my forum on the web site.
HouseImprovements 1 month ago
I appreciated the clarity of instructions. I have one question if you are taping with mesh how do you do the corners? I would love to have some advice from you.
thilene 1 month ago
@thilene I never use mesh tape myself, but I would say it would be a nightmare to use in inside cornors. It is not creased like paper tape so it would be difficult to use.I would stick to paper tape! If you have anymore questions please try our forum on our website. thanks
HouseImprovements 1 month ago
@thilene there is a corner bead available for inside corners like he used for the outside corners as another option
sexywpgboy 4 weeks ago
Thanks i learned more there in 1,2 then i have ever, i now am going to do it myself with the confidence needed
rollinthedice 1 month ago
Thank you. Very helpful. I asked several people about their thoughts on that fiber tape or just tape. I prefer the tape. Fiber didn't work out the best...Snagged it once and made a mess. Although some people have mentioned applying mud let its sit for the day, apply second coat with tape and then the same steps as you...better or worse?
smellyodelly 1 month ago
@smellyodelly Wow! worse for sure. If you apply a layer of mud first and let it dry ,then apply the tape you are just building it up even more .You want your tape as close to the surface of the drywall as possible to get the best looking job . The only time you might apply mud first and let it dry is if you are pre-filling some bigger gaps between the sheets. (1/2)
HouseImprovements 1 month ago
@smellyodelly And then you are just filling the gap not building the mud up on the surface of the drywall.And yes stick with the paper tape, as you have found the mesh tape is not the best.If you have other questions go post them on my web site forum please and give it a try.Thanks (2/2)
HouseImprovements 1 month ago
sorry but you're not an expert................
benny63674 1 month ago
I wish I had seen this video 35 years ago, when I was first learning. Mostly I taught myself with trial and error, and no instruction. Ultimately I came to use the same technique that you use, and I find it funny that you gave away all my hard earned tips in one easy lesson. You've made a great video.
spelunkerd 2 months ago
I used this as a first time drywall-er, worked out very well, but still somewhat in the dark about inside corners, 3rd coat. I'm guessing corner trowel cannot be used for that one.
Dwyer084 2 months ago
@Dwyer084 I personally don't use a corner trowel myself. I used it because I thought it maybe makes it easier for first timers. Usually one pass w/it would be enough. If not use a 6" knife to fix it up a bit. We have started a forum on our web site, if you have anymore questions try it out.
HouseImprovements 2 months ago
@Dwyer084 I personally don't use a corner trowel myself. I used it because I thought it maybe makes it easier for first timers. Usually one pass w/it would be enough. If not use a 6" knife to fix it up a bit. We have started a forum on our web site if you have anymore questions try it out.
HouseImprovements 2 months ago
Great video, very informative, thanks for posting
floiran 2 months ago
Thanks! I always thought mudding was done in one pass...then wondered why it took so long to dry (and cracked). Now I know to take it in 2-3 passes.
jobaecker 2 months ago
Very well done! Thank you for sharing your experience and knowledge!
rxmurray 2 months ago
Awesome info!!!! Thanks for the tips!!
DKufuor 2 months ago
Well done. You ought to be charging.
JoeyClimax 2 months ago in playlist More videos from HouseImprovements
I commented a while back about the "decorative" pieces in the corners of the rooms in my house. I pulled some back and they aren't taped under them. The problem is some only have a small gap between the drywall but some have gaps up to half and inch or more. Can I still mud those without much trouble? And will paint on the wall keep the mud from sticking properly to the walls? Thanks for any help!
HasteKilled 2 months ago
@HasteKilled Hi,well here is the scoop,use some stiffer drywall mud to prefill the gaps .I use mud right out of the box/pail before I have thinned it down with water.Then mud and tape it like usual.As for the paint on the walls there is no problem with the mud adhering to it but what will usually happen is you will get a lot of tiny pin holes in the mud because the moisture in the mud can not soak into the drywall paper. (1/2)
HouseImprovements 2 months ago
@HouseImprovements Thanks for the reply. A friend of mine who seen the gaps recommended that I get some metal corner bead because the gaps are really bad and all the way around the walls of the house. Going to pick some up in the next day or to. Otherwise I'd just be wasting a ton of money on mud. The gaps are even worse than I first thought. Not sure what they were thinking when building this house. Thanks again for the replies. You've been a bigger help than you might think!
HasteKilled 2 months ago
@HasteKilled Yes that should work.Glad to be of help.
HouseImprovements 2 months ago
@HasteKilled The water creates tiny air bubbles that come to the surface and leave a bunch of tiny holes that you need to skim coat again.Adding a drop of liquid dishwashing soap to the mud in your tray and mixing it in seems to help reduce them. Hope that helps you out. (2/2)
HouseImprovements 2 months ago
i love this video. awesome video.
larrylionheart 2 months ago
Do you recommend bending up the corner on your large trowel?
ProzacPreacher 2 months ago
@ProzacPreacher I do not and am not sure why you would? The corners on a good trowel will flex as you apply pressure where you need it as you draw it along your mud.
HouseImprovements 2 months ago
Thanks!
secchione9 2 months ago
I meant if they aren't tapered underneath them. Thanks for any input.
HasteKilled 2 months ago
I'm moving into a house with these "decorative" type corner pieces in every corner of every room and I was wondering if you would suggest getting profession help instead of trying it myself. They are in every inside corner and along the tops of the walls where they meet the ceiling. I don't even know what these are and they look poorly done since they are nailed on. But it's really bad looking. Haha! There are 6 rooms done this way so it will be a lot of work if they are tapered underneath.
HasteKilled 2 months ago
@HasteKilled So I'm assuming this was put there because the last person didn't want to mud the inside corners. Well I would first pull a couple off and see whats back there. If the corners are not already taped and mudded give it a try and see how you make out. You can always hire someone later if you find you can't do it.
HouseImprovements 2 months ago
@HouseImprovements Thanks for the input. Getting ready to head over there now. And this is what I'm afraid of. Hopefully they are taped underneath. But if not, I'm up for trying it myself. Thanks again for the response!
HasteKilled 2 months ago
what? come on man! you better learn before teaching how to do spakling!
ferraco24 2 months ago
@ferraco24 Well for starters he isn't doing spackling. Its a video on applying mud
jecdown 1 month ago
thanks for the videos.
989blake 2 months ago
Thanks for the video! Your instructions about the 'butt' and 'bevel' seams were very helpful, that's what I've been looking for! Is it ok for the tape to overlap at 'intersections', or should it not overlap? If you are looking for new how-to's, I haven't found a video to install and mud an arch (flex) bullnose cornerbead.
2001Sunshine 2 months ago
@2001Sunshine Over lapping the tape is fine. Keep watching for our "installing bullnose corner bead on corners and arches" video. Thanks for the input.
HouseImprovements 2 months ago
Thank you, thank you, thank you!! I have been attempting to mud my house for sometime now - quite unsuccessfully. We were just about to hire someone when I watched your videos and attempted it again (inside a closet this time), and while you still make it look so much easier than it actually was, having good instruction made all the difference!!! I'm on to the second coat tomorrow and sure that this time we will end up with finished walls! Impressive, well detailed videos. Thanks again!!
Cyn0330 2 months ago
@Cyn0330 I'm glad that I could help! Good luck!
HouseImprovements 2 months ago
Thanks, starting my kitchen tomorrow and although most of the seems will be hidden behind cupboards, I still feel better prepared now to tackle he job - cheers.
222gman222 3 months ago
Im in the process of doing my bathroom now, and this video is a big help. Good info.
rick119571 3 months ago
thanks.
pilae636 3 months ago
okee dokee....watched your videos and now it's time for this mom to head off to the basement to give this a shot! Thanks for taking the time to share the video.
MrKickypants 3 months ago
I wish you could spend more time on inside corners. I'm really having a problem with that. It's taking me way too long to do it my way. Especially in the corners.
calism23 3 months ago
@calism23 Inside corners are tricky and will take time, practice and patience. It is all about being able to control the angle of your drywall knife consistently while coating the tape.
HouseImprovements 3 months ago
I wish you could spend more time on inside corners. I'm really having a problem with that. It's taking me way too long to do it my way.
calism23 3 months ago
I've been studying part 1 and 2 for a current project. Over the years I haven't done enough taping yet to figure it out on my own, so from what you've shown here, I was immediately able to successfully apply several new techniques I have been lacking until now. For me, this is the best video I've found on the subject.
calism23 3 months ago
Nice video, very well explained. Thank you.
shift4340 4 months ago
Thanks for these great tips and knowledge sharing.
TheSolidMind 4 months ago
This was a very helpful 2 videos. Thank you! I will be looking for more videos!
geojenny2000 4 months ago
Thanks for the clear and no nonsense video. I wish my husband could teach with this approach. We had to take down the bathroom ceiling for a plumbing problem, we put up the drywall then my husband had to leave on business for 3 days, upon his return he was surprised to see a perfect ceiling COMPLETE with paint. He asked who helped me with the mudding I told him my good friend Shannon! Thanks again.
501chud 4 months ago
I love how clear and plain you are, as well as little things like the remark that it's okay if some of the mud falls to the ground, as it is cleanable. You've got me seeing it as less of a chore and more of a new skill that I'm eager to practice.
CassieJo2 5 months ago
Thanks for these videos. I knew some of this in principle, now I can use it in practice. Much appreciated!
e100s 5 months ago
I have to subscribe, this is the 3rd vid by you I needed to use. Thanks man...
NoBSThirsty 5 months ago
Good job with video. You have no idea how helpful it was.
How about one on stipple or spanish knock down.
Again thanks
maddog663 5 months ago
Love your videos. Well done. Learn much about drywall taping & finishing.
amscon 5 months ago
This video would be worth paying for. Helped me a lot, Thank you.
dexteraledo 5 months ago
Great video and great teacher! My husband and I are avid DIYers and always rely on the web for information but we typically need to watch multiple videos or visit multiple sites to get a good grasp on how to do something. You were so thorough and provided so much detail that we feel ready to tackle the taping and mudding with confidence. Thanks!
diyduo1 5 months ago
I'm going to show this to my dad today. He is a perfectionist and is super picky and takes years ( literally ) to finish something in the house.
Animalcuznj 6 months ago
just subbed, great vids!!!!!!
iluveyeshadows 6 months ago
Every 'how to' video should be this clear and helpful. Thanks for making this.
pigjamelectric 6 months ago
thanx for the video u r my hero..
Angkorian519 7 months ago
Thanks, really saved my marriage....great work!
chancesareshewears 7 months ago
Nice video. Thanks for the tutorial. I realize what I did wrong on my first attempt of taping a repair sheet.
zoomzilla67 7 months ago
Very, very helpful videos for casual DYIers like me.
One question though: what's a "butt joint" and a "bevel joint"? Thanks.
guardytube 7 months ago
I for one really did appreciate your no nonsense approach in demonstrating the details of taping and mudding. Your video did what so many other video's have failed to do, and that is you get more down to earth and more detailed about each step and each aspect of the job. It is the little things that help greatly. Thanks!
drbstraitway 7 months ago 6
Thanks,
You explain alot of little details that other site don't explain - Great job.
Tex200950 7 months ago
Very nice video thanks. Are you planning of doing more of these videos? it's really helpful
willi9723 7 months ago
@willi9723 Thanks for the feedback. We are considering ideas for future videos at this time. Thanks!
HouseImprovements 7 months ago
This has been flagged as spam show
GREAT ONE GUY ... GONNA TRY BUT JOINT AS SEEN HERE ..:}
2020starman 8 months ago
Thanks that video was great, really helpful.
tommy84ification 9 months ago
@tommy84ification Thanks for the feedback. Be sure to subscribe to the channel as we have more videos on the way....
HouseImprovements 9 months ago
this is great, I gotta Sheetrock my whole house very shortly, and this helps alot, the angles, and tricks, and the bucket, LOL, I would have used a bowl, hahahha, what you have looks handy :)
basicbabygirl 9 months ago
@basicbabygirl Be sure to subscribe as I have more videos coming soon.
HouseImprovements 9 months ago
Done! And thanks again :) I do lots of my own reno's so lets see how many you cover.
hearnjful 9 months ago
Comment removed
hearnjful 9 months ago
Well I am not an expert but I wish I had found this ages ago! I was going to hire someone to finish the job for me. I listened to many that claimed to know what they were talking about and just ended up frustrated. I kept getting told, "why can you not understand how to do this, you are a cake decorater you should have this"That is NOT true.... This is truley an art which I am now convinced to semi master. I am actually back in my bathroom giving it another go! Thanks Shannon!
hearnjful 9 months ago
@hearnjful I'm glad you found the video helpful. Please subscribe as I'll be adding more DIY videos in the near future!
HouseImprovements 9 months ago
What's the difference between a butt joint and a bevel joint?
noth8nx 9 months ago
@noth8nx Good question! A butt joint is the joint created when you butt the ends of two sheets together and a bevel joint is created when you are butting the two long edges of sheets together. The longer edges come with a factory tapered edge that is easier to mud and does not need as much work to make it flat when finished.
HouseImprovements 9 months ago
This is a great video, I'm a first time home buyer and had to do this with my garage and it was a great help
TheViciousjay 10 months ago
i have to mud my hole basement. there are alot of cracks and this is going to take time and effort! i cant wait! NOT.
gstaley2 10 months ago
@gstaley2 Most people have one "hole" one crack and a whole lot of mud in their basement but whatever!
JustForTheLOLSm8 10 months ago
Very helpful, thank you!! The video is very clear and precise. You have turned my drywall nightmare into something I just may be able to accomplish. Thanks again.
Tobiquer2 11 months ago
Great Video, you helped a novice considerably!
Thanks for the insight.... way to take initiative!
drhoffman44 11 months ago
Point up or punch out is when you correct what ever finish imperfections is on the wall after you prime the walls. Usually you would use a lamp or hologan lamp to see what ever it is you need to correct before painting. Thats normally done if your walls are slick finish, but if your going to texture your walls, (knock down, orange peel, or heavy splatter.) than you can skip that part but you should always double check your work.
GeoFranco73 11 months ago
@GeoFranco73 Thanks for clarifying your terminology,I had not heard those ones here before.Just to be clear I always sand out using a trouble light with a 150 watt bulb then I prime.Priming always makes any imperfections jump out.I then check everything again w/light and usually find the odd pin hole patch (Small bubbles) or maybe an missed edge or flashing screw.
HouseImprovements 11 months ago
@GeoFranco73 Anything I must repair I do with some mud laced with a bit of yellow food coloring to make it easy to find if the primer was white.If the paint is to be low sheen then anything minor will almost never show, but semi-gloss takes some extra care you are right.There are many tricks to be learned with experience when mudding because as you and I both know it really is an art! Thanks for your comments.
HouseImprovements 11 months ago
The video is very informative, but unfortunately you are not giving us the right information.I have been in the drywall business for 13 years and I'm positive you had alot of issues in that bathroom as far as point up is concerned, especially if you painted that bathroom with a semi gloss paint which is the norm. I'm sure you know exactly what I'm talking about but keep trying, you'll get it eventually.
GeoFranco73 11 months ago
@GeoFranco73 I don't know what you mean by "point up"
HouseImprovements 11 months ago
by far, the best one i have seen on here....good job !!! i will use your tips !!!
ranger4327 11 months ago
Thanks Shannon - going to do my basement office now!
treschny416 1 year ago
Very informative video, being a woman over 45...I think I can do this, you explaind everything in detail which will be very helpful!!
THANKS !!
MikiMouseTexas 1 year ago
Thank you for the advice, tips, tricks, and comments, helps a lot for my future project :)
genuineaid 1 year ago
this really helped, much appreciated!
Lonnidocks 1 year ago
great videos. take a deep creath and have patience...wish me luck!
tpeila 1 year ago
Great video it help me alot thanx 4 charing it!!!!
memosteklas123 1 year ago
thank you very much, very informative! off to the new bathroom I go!
beuferd74 1 year ago
Good video. on Joints, I personally go 6 inch, 12 inch, 24 inch then on butt joints up to 36 inchs. On Corners I go 3 inch, 6 inch, 12 inch.
Traxtitan 1 year ago
Well done. I learned allot and may tackle a drywall project in my home.
tonikins99771 1 year ago
Do tile next plz
carloshermoso1 1 year ago 6
@carloshermoso1 Thanks for the suggestion! The video is not done but we do have an article on installing tile flooring on our website.
HouseImprovements 1 year ago
@carloshermoso1 The tile video is now posted. Thanks again for the suggestion!
HouseImprovements 1 year ago