WE G39 Chrono, Accuracy, Cooldown Tests

[Drumdudeck]

oh, and for everyone who is wondering this looks like the we g39k

[Ender007]

@Drumdudeck It was bought as a WE G39C, then tossed on my CA G36K barrel extension and hand guard.

[TheKingOfAllMisfits]

I bet you can't do that with a real g36....... You wanna-be warrior.

[Drumdudeck]

@TheKingOfAllMisfits i bet u cant either

[azndragon10]

Hello Ender! I hope you get the time to look at this comment, and to hopefully reply to it. I was just wondering, how has this gun been working for you, or your friend? I was thinking of switching to gas due to the fact that AEG's gearboxes do get annoying after a good amount of time of working on them. But, i don't want to spend too much just in case i do not like it. So i was just wondering what is your feedback on this gun? Thanks! 

[STUNTJUNKY1234]

hey ender, this is gunna be my first gbbr, but i wanted to use as my cqb primary is there anyway to detune so its cqb friendly fps wise?

[gandhicakes]

@STUNTJUNKY1234 RA Tech makes an NPAS system I think. Or they will soon...

[sparkynewyork]

why dont you use real guns! P U S S Y ' S

[MrMuthaUcker]

@sparkynewyork

Because you can't shoot your friends with a real gun, unless you want to kill or seriously injure them.

[Hazukro]

@sparkynewyork

playing call of duty doesnt count as real guns faggot troll

[Dracanon]

cool thanks for the Chrono with .25 BB's! At my field I go to, they let us use .25 400 FPS or under. I just bought the WE G39RAS!!! My game with it will be June 12th. Now I just need to save up and buy enough mags to last me during the game, LOL.

[MrMuthaUcker]

@Dracanon

Do you live in England? If so were did you get the g39 RAS from.

[haveagav]

I want a gun for cqb and sort of out door play. Is the g39c better for that than the we pdw long barrel. Withch is better

[laxman4008]

cant wait till i get this gun!!! just got to wait till next month. :(

[bullmeatt]

you dont use the bolt release?

[Ender007]

@bullmeatt It's can be very stiff and hard to press. I find it easier and quicker most of the time to just pull the bolt back until the bolt release wears down some more.

[bullmeatt]

@Ender007 oh see that makes sense. I just dont like it when people dont use the slide release on pistols, its less practical

[silenceimurderyou]

@Ender007 so, if you were to put co2 mag in how many shots would that co2 use?

[Ender007]

@silenceimurderyou To my knowledge there haven't been any CO2 mags released for the WE G39.

[Varaxfire]

@Ender007 i think its built to be able to use CO2 :o

[nulk1]

@Ender007 yeah that is true they really need to make one

[SniparSkills]

@Ender007 can you add a pistol grip to the K-version real easy?

[UBCSWraith]

@Ender007 Mine wore in after using it about 100 times. I can easily use it with my firing finger now.

[TheElvemageFGamingCL]

@Ender007 you look like be but older

[ZigZag1808]

green gas?



[Ender007]

@ZigZag1808 This was using green gas.

[ZigZag1808]

@Ender007 Just received this gun yesterday, and im not quite sure how long it takes to fill the whole mag with gas. How many seconds should i fill it?

[Ender007]

@ZigZag1808 I'd wait about 5 seconds, release, then fill it again for another 3 seconds just to be sure.

[ZigZag1808]

@Ender007 Ok, thanks a lot. LOL good to know you famous people are still helpin us "little" people :) I have 4 mags total and 1 of them leak.. its leaking from the top area, including where i put the bbs in. Do you know how i could fix that? Or should i just take it in to my local airsoft store?

[Ender007]

@ZigZag1808 To fix leaky mags the method I've been told is to wrap the oring with teflon tape, then coat it with silicon spray.

If you bought the mag just recently you could try to ask for a replacement from the store.

[edward0]

whats the magazine capacity for the G39?Im reading figures from 30-39 around the web.

[Ender007]

@edward0 It's 30 rounds.

[cjbmarine]

I'm having a hard time removing the flash hider did you do anything would be helpful thanks bro

[Ender007]

@cjbmarine They put loctite on it. What I did was remove the outer barrel by loosening the barrel nut (which has a little loctite too). Then I clamped the outer barrel in a vise and used a long screw driver to twist the flash hider off. You're going to need a lot of torque to loosen it.

Alternatively, you could try letting it sit in warm/hot water or take a small torch to it to melt the loctite.

[thesin24]

Hey Ender, just wondering if you remember the rough temperature outside when you filmed this. would like to get a FPS-to-temperature comparison

[Ender007]

@thesin24 I think it was somewhere around 65-70F that day.

[Xilver1]

I noticed you converted the C version to a K. What parts did you use (including inner barrel)?

[Ender007]

@Xilver1 CA G36K handguard and outer barrel extension. Inner barrel is still the same C length barrel.

[mongdex]

@Ender007 how to convert to G36? g36 ca handguard and what barrel?

[Ender007]

@mongdex CA, STAR, ARES, any of those handguards should work. The outer barrel is just barrel extension that screws onto the C's threaded barrel.

[M4A1DUDE]

hey ender. so the g39c shoots 400fps stock. i am planing another trip out to the city soon with my WE PDW. first time rocking a gbbr out there. only problem is it shoots 460fps with .25's stock! probably 510fps with .20's! got to buy a RA tech adjustable nozzle to lower it : ( also how many mags do you need with a gas gun without having to be constantly reloading?? i got 3 mags.

[Ender007]

@M4A1DUDE You should be able to live with 3 mags, just be sure you got a sidearm with at least 2 mags. After I bought my WE M14 I had a single 30rd mag, and I still did pretty damn good. Just run out, die, reload, run again.

With 3-4 mags I normally have to walk off field mid round to load my mags up again if the game is long. Other games I barely fire off 2 mags, really depends on the gametype.

[M4A1DUDE]

@Ender007 oh, ok. sounds good. yeah i got a couple gbb sidearms, i also got a speedloader that holds an additional 90 bbs(3 mags worth). also i keep gas/bb's on me wile playing at cqbcity. i should be good to go.

[FloChris]

I would never buy an open bolt gun. the power drops so bad I could also buy an AEG that shoots as hard. And by the way, I wont pay twice as much just for the blow back effect

[Ender007]

@FloChris The power stays fairly consistent while firing the whole mag. And for only $200, it's dirt cheap, cheaper than most of the higher end AEG's, so price isn't really an issue unless you're poor.

Blowback isn't for everyone. I switched to it for the challenge of having limited ammo, dealing with recoil, and not having to deal with opening gearboxes over and over. Going back to AEG's just feels so unsatisfying now.

[FloChris]

@Ender007 Im glad its only 200$ in the USA, unfortunately everyone thinks europeans are only there to be ripped off. I payed 365 EUR for the PDW!!! Thats almost 500$. So no, Im not poor. If the guns would only cost 200$ here, I would probably even buy an open bolt gun. Until then, theyll only get my money for something really great and powerful

[darkninja225]

@Ender007 yea i got the gun after watchin the vid.. very nice and it is cheap as dirt.... the only reason i use an aeg now is because my marksman load out type thing.... its alot more stealthy and there are more compatible and easily available upgrades

[osnap32]

the reason gas came out like that when you shot at full auto, was becuz you overcharged the mag, usually a 6-8 sec charge could be good. nice video. i just ordered mine n should get here fri. :)))

[guythatmadethisvideo]

@osnap32 lol ur smiley face has a double chin you should tell it to stop eating those happy meals

[Wepen935k]

hows the magazines? i hated the m4 mags sooo much because of leaks.

[Ender007]

@Wepen935k I have 4 of them with no leaks so far, it's going to be a few months before I can get back to you on if they leak or not.

[mikebanawa]

nice video especially the part that you cough.

[halotango3]

you remind me of jack from red dead

[CircusAndVincent]

Dang so how did long did it take to take the flash hider of it looks great?

[Ender007]

@CircusAndVincent About a minute to loosen the barrel nut and remove the outer barrel, then another 2 minutes to clamp the barrel and twist the flash hider off with a long screwdriver.

[CircusAndVincent]

@Ender007 so the accuracy is affected because of the long outer barrel?

[Ender007]

@CircusAndVincent Doesn't look like it. But the accuracy test here may not show it's true potential, as it still needs to be broken in. During today's game I was hitting people past 100 feet with just a few shots.

[CircusAndVincent]

@Ender007 nice I might be rethinking this plus I could do a getto mod to the barrel.

[Erikootje]

@CircusAndVincent

accuracy has nothing to do with the outer barrel, only an inner barrel can make it go harder, and maybe more accurate.

But outer barrel has no effect what so ever, the bb just floats in an outer barrel.

[MadDogPownes]

were you using propane

[Ender007]

@MadDogPownes Using Green gas, performance is the same as propane. My friends WE G39 chroned the same as mine on propane.

[l33tkawasaki]

wow... you haven't had the thing for very long and you already put a whole new front end on the thing?

[Ender007]

@l33tkawasaki Already had my old CA G36K laying around, so I just swapped the handguard and replaced the flash hider with the K's barrel extension. I like the G36K more than the C, just the right length for me.

[vsr111]

FIRST!!!!