Make a Floating Magic Wand

[wi11ieman]

wait, so why drill the hole in the middle? Does the black thread go through it? How did that work?

[Legocreator123456789]

Heres how you make an easier one ,get a nice wooden rod say the magic word abracadabra...

TA DAA! you have your own magic dancing wand (warning may not work) please like.

[DrHellyes]

@Legocreator123456789 your fukcing stupid.....

[Jambro972]

How did i get here from the gamechaps?

[grimmjow100]

aint him doctor house?

[sciman001]

that is pretty cool Dr. House.

[PITITASHOW]

hello, good explanation, please levitating table saw, you know how you do it? if you know what you agradadeceria showing you, thank you.

[Rockindan10]

why do you have to put the hole in it then put steel in it then glue wood on top?

is it just for decor or is it important

[stevinmarin]

@Rockindan10 The steel rod just weighs one end down. I covered it up so it wouldn't show and reveal the gimmick.

[Rockindan10]

@stevinmarin yes but do i need to put the steel rod

[stevinmarin]

@Rockindan10 Probably...it needs extra weight to keep it upright.

[Rockindan10]

@stevinmarin do i need the steel rod

[lilmeurs]

@stevinmarin why the tiny hole in the side

[lilmeurs]

@stevinmarin why the tiny hole in the side ?

[radbrad2000]

@Rockindan10 because it gives you weight to the stick

[beefywarrior12898]

how to have a magic floating wand.

Step 1: BE HARRY POTTER

[stevinmarin]

@beefywarrior12898 HAHA!

[shivaqx25]

can you exlpain the tying the string and the hole in the middle part please?

[FireNest92]

Pha! This levi has very very bad balance. Because it is very bad idea to make the hole exactly on the balance point. Hole for the thread must be a little bit higher than the balance point (it is better to find it with yourself... Just try to place thread in different places with scotch tape and find your place :3 )

[dmehling]

@FireNest92 He did make a specific point about putting the thread slightly toward the lighter side...

[biophylia]

look alike. You could be his twin.

[0missmannequin0]

make one for meee

[PrOsEmIh]

Dr. House?

[stevinmarin]

@PrOsEmIh He keeps getting people telling him he looks like me.

[kankuro876]

He looks like house o.o

[MagicMc9]

Is that Dr.House ?

[Arunictrichloride]

cool story bro

[basteth66]

I am going to make a light saber with this!

[Cole2605]

Where do you get the steel pin?

[stevinmarin]

@Cole2605 Any hardware store.

[plantleg]

this was real great.although a suggesting would be to make the wand a littler shorter

[TonyC911]

he looks like dr house!

[6PimpNinja9]

dude your a fucking pimp ass guiniess thanks

[TOBORtheMighty]

You're an awesome dad! Keep it up and thanks for the videos.

[Jughead2950]

Cool dad.

[mewbra123]

2:37 gave me a seizure

[qwerty09488]

iTz gReAt .. dr.hOuse LOLXD

[Gustavo446677]

wow cool but do you have to cut a holl inside and stick those things inside for it to work?

[stevinmarin]

@Gustavo446677 Not necessarily. Basically, you just want a stick that is weighted on one side. That's just the way I came up with to conceal the weight.

[switch607]

awesome video man, seriously

[MrHarryPotterBrasil]

Dr. House OMG O.O

[malditonegro091]

listo para los reves...

[redflare31]

You kinda look like House from the tv show... 0.0

[KaptainKwasnik]

Funky Dad!

[MinecraftStarTrek]

WoW its work i make it!

[purple089]

its pretty nice :D

[Super0rion]

Dry time



[2003kaloful]

WOW IT WORKS! IM PLAYING IT NOw

[31guyman]

its not floating

[flxcvz]

@31guyman make the tiny hole slightier to the lighter side ;)

[fyi65]

at 1:14 tht jst look so wrong

[matt82403]

@fyi65 i thought that!!

[fyi65]

@matt82403

hahahah yea

[MuteHelperComments]

swear to god thats doctor house. This guy isn't a look alike, hes a fucking clone! jesus thats just scary!! o.O

[thewormwood9]

nice video :D

[bradv97]

tie black to ring to ring forr better effect

[323GreaseMonkey]

you look like house

[muserwood]

Ok, I'm lost. You were doing fine till ya drilled the hole. Did you tie the thread THROUGH the hole. and then tied it to the other end ? (but no hole at the other end ? Then what ? Is there a thread tied to your hand ?

[stevinmarin]

@muserwood Yeah, the thread just ties around, through the hold. Wrap the loose end around your finger.

[muserwood]

Ok, I'm lost. You were doning fine till ys drilled the hole. Did you tie the thread THROUGH the hole. and then tied it to the other end ? (but no hole at the other end ? Then what ? Is there a thread tied to your hand ?

[phantomgirl1231]

cool!

[robin8815]

nice mate i bout the real magic wand but you method is great / mr magic man Sweden

[Litt13B00ty]

you ruined magic!! loz just kidding

[atc1con]

string

[lilylilianaliliana]

GREATEE ANOTHER TIMEE!!

[millster2000]

Your AMAZING!

[Kopentolous]

haha u know how if u dont have the greatest internet connection... then u have to pause the video and wait a lil. well i paused it and b4 it started i was listening to this song hehe! thts awesome

[Leitocevela]

Steel pin to both side ?  :D

[stevinmarin]

@Leitocevela Just one, to make one side heavier.

[steee126]

@stevinmarin

So, the hole you make is not exactly in the middle. is it more towards the heavier side oder the lighter side?

[ecvsio]

nice rope you got there on your stick

[MSJORDANGARBUTT]

i think you guys used black thread and just hold it to make it look like it's floating. DID YOU?

[stevinmarin]

@MSJORDANGARBUTT Yup...black thread is nearly invisible.

[ShinoAburame007]

what is the length of the levistic

awesome video btw :)

[jaren184]

what was the magnet for then?

[stevinmarin]

@jaren184 It's not a magnet...just a steel rod. Anything to give it weight on one end will work. You could get fishing singers and fill the hole with them...that would work too.

[cheapspace]

VERY NICE!

[DuckLower]

in 2:33 what make the thread stay at the top of the "wand" ? Please answer !

[stevinmarin]

@DuckLower I doesn't attach to the top. I was just holding it while I wound it around my finger. It only hooks into the center hole.

[DuckLower]

@stevinmarin OKa :D Thanks Dude :D YOU ROCK!

[emosk8er97]

I love how when you put music on your videos. It doesnt even make sense about the video

[DragonsNerf]

u look like the guy from house and that is really cool

[kjnilsd]

can you like... you know... ADOPT ME?!?! that is really cool!

[macongvlnt]

can you make me one or just give me on for free or even better for you sell a color blue 1 for in philippines money 50 pesos hahahaha

[wael69110]

cool mere mortal

dr .house

[PopcOrnDeVilPD]

keep pressing 4 ;)

[wtfackrr1]

@PopcOrnDeVilPD You're sick :P

[ayllasousa]

thats really cool! u r an awesome dad. hahaha u look like hugh larie( the actor that plays dr. house)

[TheHurkmagic]

nice work bro

[archangelval]

this is soo cool :)))

[barbalote2]

will you adopt me?

[dsavetark]

ur so awesome..........am gonna make this thanks you..^^

[theamandashows]

wanna be my new dad!?

[legoman1539]

thats cool



[MagicFito]

Wow... I need a dad like this jajaja

[jwismillion]

i still don't get how to make the illusion... nice video tho!

[yourworstnightmare6]

the only thing my dad has made me was a ham and cheese fuckin sammich

[samee2334]

i did that but it doesn't fly u know it is like a puppet or something like it is not REALLY flying

[shimeiwoo]

wow my dad can make a bed but not a wand :/

[Offshoreorganbuilder]

Great, but I had to shut off the vile row, so that I could concentrate.

[phillipmorin1]

House makes woodworks? wow he needed a better hobby to do.lol

[henryk8675309]

Thats some creativity right there

[watersnake055]

dude fucking awesome

[krasstimothy]

You're amazing and Dr. House :P

[MrThargus]

rausley gadernal de saracuruna

[jclol983]

that's so cool 

[ThelemicPotter]

Great instructions but utterly unnecessary music.

[JorgeDX3]

you look like dr. house

[akiratohomiko]

@JorgeDX3 Agreed

[toomsje]

it works!!!!!!!!!!!

thank you very much!!!

[bukosz]

Dr. House?

[KeTeVemCovers]

@bukosz more Dr.DIY

[krasstimothy]

@bukosz I also thought Dr. house haha!!!

[Giraterra]

@bukosz I think the same thing lol

[CyraUK]

@bukosz I thought the same thing, this guy looks like Hugh Laurie's long-lost twin.

[runningsandwich]

@bukosz no, Gordon Freeman

[kjnilsd]

@runningsandwich Dr. House's secret identity is Gordon Freeman... betcha didnt know that now did ya?

[jackussss]

@bukosz LOL I WAS THINKING THAT ASWELL!

[leroyjenkins369]

@bukosz OMG I AS GONNA SAY THAT!!! XD

[SanderRadionov5299]

@bukosz haha dude I was just thinking that :D

[runningsandwich]

@bukosz no, gordon freeman

[cooperpk]

1:15 - 1:19 is the best part.

[Lildrummer02]

@cooperpk hehe

[AcrylicVomit]

@cooperpk hahaha



[uikonaful]

:) nice vid

[falloutboyroxx1]

you rock

[jorca54]

another mask magician disciple...

[evanakane]

i tryed your way of doin it buut my staff keep goin in cercle AWWWWWWW

[AlexisNicolas]

Thanks So Much

I Love IT

[skids1999]

use the magic power of the force

[Bloodweiser69]

nice man i dont do woodwork but i have been watching your videos and it has givin me sum great ideas. the time for me right now is 1;41 am started watching ur vids at lie 12 very good

[theguitarhero649]

nice shirt;)

[LoveAfterExtacy]

how do you attach it to the end of the stick?

[magicmasta33]

@LoveAfterExtacy he didnt, he wrapped it round his finger.

[mickael345]

HOW DO YOU DO THAT !!!!!!!!!!!!!!!!

[HallofWisdom]

liked - faved!

[yadira268]

could u make me one i will pay u

[ExquisiteCorpus]

what a cool dad!!

[pintpuller2008]

dude i have been looking for one of these puppies since i saw a guy using one at Bestival 09, and no matter where i looked they illuded me, so i baught some dowel and now i have this awsome vid, i am a happy camper!, thanks mi amigo, and when mine is made i will let you know how i get on!

[pintpuller2008]

dude i have been looking for one of these puppies since i saw a guy using one at Bestival 09, and no matter where i looked they illuded me, so i baught some dowel and now i have this awsome vid, i am a happy camper!, thanks mi amigo, and when mine is made i will let you know how i get on!

[100themagicman]

as a magician and have baught this trick myself i am allittle pissed that you would make a vid on how ot make it but i am happy cause now i dont have to buy another one so i can just make one so good job and great vid

[nedonfunnies]

ha! nice!! I liked it

[111134531]

I think the steel pin is to give it some weight in a certain direction so it doesn't look like you're moving it with a string.

[pogokurt]

so why do you need a steel pin?

[xialong123]

damn love your vids bro but epic fail on the music....

[soniccammy]

awesome floating effect

[tonism987]

i like it it's awesome

[diabloman91]

that's awesome, also at the end of the video it hough you were hugh laurie (Gregory House)

[Oblivion4pcand360]

@diabloman91 lol same!!

[optimusandratchet]

@diabloman91 hahahahaha me too!

[alexis221woodworks]

nice

[frbjeffj]

Umm.. I don't get it .. lol .. how do you attach the string exactly? lol .. ;x

[mrpieman29]

you drill a hole in the wand, put the thread through it then tie it

[tobz5050]

awsome. (p.s you are definatly house)

[kurthak]

awesome :D

[JoeCubicle]

Steve, you made me chuckle and snort in public here at a coffee shop. You so Boom Boom Pow. I saw that you finished the deck, haven't watched it yet but will.

[xtaco4BR3AKFASTx]

so cool

[keenanboi12]

this is awesome!

[munky000527]

I like your videos. And you look like House.

And that song is hilariously bad.