Pedley wood water wheel

[discoide1451]

generateur 24 V site Weeb discoide1451

[vintagebazaar]

Hello

The project is very good to continue to improve the system.

Also have a look AZENHA, WATER MILL ALTERNATIVE ENERGY

Thanks

[Hendo56]

You actually put together a team, made designs, and built something! I think that's great! *****

[steveeo1]

This is a great idea and i have also had the privalage to see it in working order due to doing some tree work for the owner and it is still generating electricity. But the owner has now modied the wheel to a steel one.

[mikepepler]

Good to hear there's a metal one there now - the original wooden one would have been 20 years old by now, so would probably be in poor shape!

Mike

[phaaurarlison]

i'm looking for a battery bank for my water wheel. something cost effective.

[4vermont]

This is great. Thanks for sharing.I have a waterfall and stream and a Grist Mill was on the property years ago. I would like to know more on Grist Mills in New England.

And would like to get some alternative energy from the stream.

[mikepepler]

Well, a water wheel isn't really that efficient, but you could try looking at using a small cross-flow turbine, or if the head on the waterfall is high enough you could try a pelton turbine. Alternatively do a web search for "archimedes screw turbine", though I expect they're too big for you.

Mike

[4vermont]

Thanks Mike, The waterfall has an immediate drop of 10-12' . But from the top of the falls to the end of the property, which is 500-600' from the falls.There is probably a 15-16' of elevation change from top of falls to end of my property. Thanks Again

[mikepepler]

OK, probably not enough for a Pelton, but a crossflow is possible, and is a nice simple turbine - I've heard of people building their own with some welding gear. Your next step is to measure the water flow (in litres/s or m3/sec) (convert the head to metres, so the calculations for power are easier in metric). If you look around on the web you'll find various ways of measure flow. Ideally you'd measure it in different seasons. The other thing is to use a map to work out the catchment area.

Mike

[Iraqveterankill4real]

Your not looking at it right people only think you can hook one generator to the shaft but with the right tools you can place as many as six on one shaft and you can run two shafts of the wheel. I have an Idea for low rmp permanent magnent generators . I am going to flip the input of a planetary gear for maximum RPM and Hook up two low energy high efficent tubro pumps to the generators to continually power the wheel and 12 3.5kw gens this should power at least 4 homes with cost efficent power.

[amazinnblazin]

i am very interested in this whole idea.  tell me, what could i power with 700-800 watts? several homes or a neighborhood or what?

[mikepepler]

Probably just one house, and you'd need a battery bank for when you turn on the kettle, as it would need up to 3,000W!

On the other hand, if you made an effort to use very low energy appliances, and used a wood stove to cook on you might be able to run a few houses. In developing countries where the elec is only for lighting, radio/TV and mobile phone charging, 100W per house is sometimes enough!

Mike

[firedude201234]

um maybe a small microwave in america:( we arent very energy effeicent haha

[KanineKruizer]

Nice job, I wonder how long it took.

I have a couple of questions to ask, though.

First, what type of water wheel design did you come up with. I know the feed type is an overshot, but what is the wheel design type?

Secondly: because the wheel is wooden, has there been any problems with its performance over the years.

Lastly, is the setup still in operation today?

You all have a good day.

[mikepepler]

Hi. It's going back nearly 20 years now, but I'll try and answer your questions!

I think we spent several months building it, but that was just weekends and the odd day off school.

I'm not sure on the wheel design, other than it had normal buckets, perhaps sloping out at 20-30 degrees.

It was still in operation when I looked several years later, and the wood seemed to be OK - it was marine plywood we used to build it. I'll ask the guy who owns the place, maybe he can answer.

Cheers, Mike

[aud6875]

were is this at

[mikepepler]

Cheshire, UK

[browiec666]

What a great idea :) 5* and favourites:)

[filminaway]

Good to see where it all began. A great achievement.

[PEDERCINO12]

How many power in W?

[mikepepler]

I'm struggling to remember, it was a long time ago... perhaps somewhere between 500 and 1000W?

Mike

[PEDERCINO12]

Thank you

[sblomjom]

It said in the video 700-800 Watts

[radford20]

WOAHHHH!!!!