1992 RS Camaro 5.0 w/ "big" cam.

[RunninCummins]

what are the specs on the cam you're running?

Intake and exhaust duration? how much valve lift?

Sounds great

[suckTTvapor]

@RunninCummins Umm.. I can't remember exactly, but it was very similar to this cam here:

Intake Duration at 050 inch Lift 218 Exhaust Duration at 050 inch Lift 224

Duration at 050 inch Lift 218 int./224 exh. Advertised Intake Duration 262

Advertised Exhaust Duration 270

Valve Lift with Factory Rocker Arm Ratio 0.464 int./0.470 exh.

Lobe Separation (degrees) 114

It was a cam designed to work with a TPI 350 engine, but they don't make it anymore. Thanks for the comment!

[josh666675]

ow do you get highbeams on i can only gewt two far lights can i recieve some help

[glamisfanatic]

love it

[Camaro1019]

hey did u hav to make any mods to make the cam work

[suckTTvapor]

No, just make sure it's a hydraulic roller for a computer controlled small block chevy and you should be okay. Summit use to have cams just for these engines.. not sure if they do or not though anymore.

[Derkonthetube]

What exhaust set up?

[suckTTvapor]

It was a flowmaster cat-back.. uh.. 2.5" 80 series or 70 series? Which ever one is the single inlet dual outlet. Cat was gutted and 3" tips.

[Derkonthetube]

Cam duration?

[suckTTvapor]

You know I can't recall... 284 ish maybe.

[crazymonkey626]

you know that the LT1 cam works perfect with the stock heads really wakes up the car. any bigger you'll have to work the heads or get different ones

[suckTTvapor]

It's a 305 TBI with a bigger cam designed for a worked over 350 TPI.

[GRYNCHESP]

305 or 350?