BH FITNESS G6445N PIONEER STAR TREADMILL

[bhfitness]

The problem must be solved. In case it does not work, you should call to a technician

[bhfitness]

- If the machine is too elevated, please try this: with the monitor on and the motor off (the machine connected but stopped), pulse at the same time “stop” button and “incline-down” button. Pulse it until the deck goes down to the middle of the incline trajectory. Be careful and incline down just to the middle. Now switch off the machine. Wait 10 seconds. Switch on the machine and press START button. The belt will start moving forward and the incline motor should go to flat position.

[bhfitness]

The problem must be solved. In case it does not work, you should call to a technician

[bhfitness]

- If the machine is too flat, please try this: with the monitor on and the motor off (the machine connected but stopped), pulse at the same time “stop” button and “incline-up” button. Pulse it until the deck goes up to the middle of the incline trajectory. Be careful and incline up just to the middle. Now switch off the machine. Wait 10 seconds. Switch on the machine and press START button. The belt will start moving forward and the incline motor should go to flat position.

[26wilsonrd]

what does E7 mean? it keeps flashing on the console?!



[bhfitness]

@26wilsonrd SOLVING E7 ERROR

It is an error of incline. Try to do this. In case it does not solve the problem, you will have to call to a technician, because the electronic card has to be changed.

Solution:

[vince198803]

I have one of these and I think its great

[megadisc1982]

how much selling in malaysia?

[megadisc1982]

has any1 used it b4 ?

i'm thinking of getting it but just a few tips