how to install audi style led strip INSIDE HEADLIGHT (OFFICIAL TUTORIAL)

[Fabian7024]

Dnt guess wires buy a multimeter -___-

[N0ZER]

Videos would be so much better if you had a good camera!

[RockRevialGirl01]

Nice! Thank you

[rewalt154]

you suck

[diamondblade1]

Do u think a xenon kit will burn through that?

[MrTattooAnt]

hi this is TattoAnt @ customillusion21@yahoo.com i want to do the same thing you did to your lights to my mustang i need a more step by step can you help me

[Morpeh1973]

фарой по бетонному полу.... ай молодса!!!!!

[twofivefourlos]

you shouldve used switchback led strips

[Maxcournoyer]

very neat dude. great job

[George1rider]

it is released in Europe?

[desirae7420]

do you have to disconnect the battery before doing any wiring? will i get a shock or wreck my headlights if i dont? would love to know thanks.

[cartzar]

@200twistatwista Check out my new vid. It has a turorial on hoe to wire properly

[Ninosilvio]

nice random search in youtube and even the car is the same ;) thnx

[TheChewBears]

Yep, let's just lay that poor headlight cover face down on the concrete while we scratch it lol

[eldestotador]

I have a 2008 VW Touareg V6 Galapagos Grey, i have front LED stripes at the bottom in the outside part of the headlights, but taking the car to the car wash once a week is very risky and they'll get damage very soon maybe, i think the LED stripes will last more if i can place them inside the headlights as you showed in this video, they need to be waterproof also, any suggestions on how i can do that in my car? My email: elduronyc666@gmail.com

[burgandy25]

@ 4:00 I before E except after C, not before C.

[200twistatwista]

How did you do the wiring to blink the led strip than the turn signal bulb right after?

What wires do I connect where?

[appleinfl]

You scraped the plastic all along the ground and the LEDs don't even lie flat. Also not using silicone to reseal the headlights is just asking for condensation.

[Nolvertoisbad]

Dude you showed that light first. Then you did the driver side and at the end you show the passenger again? Wtf lol.

[enjoirox1]

Do we have to wear sandals while doing this? XD

[calhoun78east]

I could not belive that he did not lay down a throw rug to protect the light from the cement. He can't be to smart.

[robertkirkham]

@calhoun78east

he showed the same light twice trying to tell us that it was the light he'd just installed.. so yeah... not the sharpest knife in the box, dumbass, actually show the light you did you bellsniff.

[josehernandez16]

This looks like the light of a 2011 Scion tc am i right?

[BMSDRayzr]

driver side was not working in ur video bro!

[MauiBoii801]

Where did u get the led strip?

[dart2354]

can u clarify the wireing process more?

[crackacraig12]

@modzilla28349 he said "try not to scratch it" lol

[stevenpr48]

dont trust this video



[stevenpr48]

use a table next time it much better and more profecinal

[96miatajj]

Can some Please tell me how to open Nissan sentra 2003 headlights case

[badmattitude666]

any one notice the indicator was just on at the end there?

[Trukerinfulleffect]

Great vid, I gotta jetta I want to do the same thing but taking off the lense seems alot work and also how do u seal that lens properly??, also where did u get the LED kit??

[speedfreak460]

btw dont ever take a heat gun to the lens unless u want to get a new one lol

[speedfreak460]

your lights look so sloppy in there u fuck everything u do is gettho

[LightningDZ]

Great Video Man. You have inspired me to try some mods on my car. Thanks!!!

[YoUnGCaTo94]

am i the only person that noticed he showed the same light in the begining of the video and the end but yet the one he was trying to show us how to put the lights in was the other so that doesn't prove that it actually works the way he says

[cartzar]

@YoUnGCaTo94 the beginning segment was filmed the next day. the segment where i put the lights in was filmed the previous day, but i didnt have an introduction, so i decided to make one after i filmed the process...

[YoUnGCaTo94]

@cartzar oh alright well i understand that. i apologize

[melo7477thegreat]

@YoUnGCaTo94 tarded

[MsBharat111]

Thanks dude

I buy it

But do you know any another way to open poppet the lights

I don't have the machine you was using for light to open

Please let me know

[cartzar]

@MsBharat111 you could use an oven. pop it in for 6 minutes on 275 degrees F. make sure you remove all the light  bulbs from the assembly

[DUFNER1]

@MsBharat111 there is another guy on here that put the light housing in the oven and it seemed to have worked better than this one and let me add try and find double sided tape that is clear unlike the white kind in this vid

[TheGoldenWog]

thanks man, i did it with s2k and it came out so good. thanks again!

[dedasdude]

dont move the damned camera soo much even when you are standing.

nice tutorial anyways.

[cartzar]

@dedasdude thanks! much appreciated

[resivoltio]

don't you have any problems when it rains? because the sealent doesn't work as well as it did before or does it?

[cartzar]

@resivoltio the seal actually works great. after the reheat, the seal melted right back into place. so still no moisture within the headlights.

[resivoltio]

@cartzar thanks dude !!! i was thinking about getting exterior grade silicone

[MsBharat111]

Thanks 4 answer

Where I can find led strip lights 4 jetta

[cartzar]

@MsBharat111 ebay. type 48 led white, and filter the results

lowest price+shipping

buy it now only

[MsBharat111]

Great video. But tell me I have 2001 jetta

How I do . How I make Audi strip light in my car...

[cartzar]

@MsBharat111 for an 01 jetta, you will need to remove the bumper, unscrew the headlight, melt the seal of the glass, insert the leds, wire them, then place it back. i would line up the leds along the bottom of the headlight.

[wotldthe2006]

I did this on my center tail light on my hachback since the light blown and melted the wire and was going to cost 45 bucks for a new one so I got on of these led strips for 12 bucks at walmart and it worked.

[cartzar]

@wotldthe2006 good stuff man! however you could have gotten the same leds online for like 3 bucks a strip...

[GeneralGadget11]

How about a video on tail lights, like the 2011 Dodge Charger?

[cartzar]

@GeneralGadget11 that is a great idea! i am going to buy some leds today!

thanks for the suggestion.

[GeneralGadget11]

@cartzar Awesome! Can't Wait!

[KNOT1COD]

3:51 try not to?? to late you already did... lol

[cartzar]

@KNOT1COD yea,...

[SuperLimeno]

hey can i o the same in silverdo truck

[modzilla28349]

anyone else notice he was scraping the headlight against cement. ouch!

[cartzar]

@modzilla28349 yeah... theres a few scratches on the light now, so next project, i will make sure i keep a towel underneath the light!

[wotldthe2006]

@modzilla28349 These new plastic ones now are not worth a flip since I got my car in 2005 I had to replace them 2 times due to the first time UV damage and the second time a damn bird hit it and cracked it

[DUFNER1]

@modzilla28349 yup and then he tell's us try and not do it. nice light set up but why did he use white double sided tape? they sell clear and I think black but why white on black.

[jskmnorris]

@modzilla28349 I noticed, lol. So much for professional

[gregyang72]

Right after he scratched the shit out of the front he says, "Try not to scratch the main glass"... LOL

[55bobbob55]

That was my first and only thought.......

[jrface06]

@cartzar anytime, its just an extra precaution to make sure no moisture gets in there after it rains. I live in ny so I have had to deal with snow, rain, and all types of craziness, anything I can do to help out

[jrface06]

Great video. One thing I would like to add, due to you taking the headlight housing apart, the "glue" that seals it, might not properly seal all the way like it does from the factory. This is a trick I learned when installing aftermarket headlights in a few of my vehicles. Get some clear caulking from a hardware store and run a small bead of caulk around the edge of the headlight lens after re-installing it. Make sure its dry and cool before doing so though. This will keep moisture out.

[cartzar]

@jrface06 thanks. im going to try that trick of yours.

[cartzar]

@ikazai you can get a cheap strip from eBay. Type "48 led" or "24" led. I'll find strips for 3 and 1.50 respectivley

[migue2255]

thanks bro

[iKazai]

I wish you can do this on my 02 Acura TL :P

I don't even know how to wire or open a headlight..

ahh lol.

[cartzar]

@iKazai if you need any help, just feel free to ask.

[iKazai]

@cartzar well I'm thinking about buying a LED strip for my 2002 Acura TL and put it where the foglights are..

where can I find a Cheap LED strip?

[djbujub]

@iKazai im trynna do the same to the acura TL . shit would look odee niceeee