ok listen. Great idea but heres the thing. All that you are doing is switching the wide angle element around so it casts a shadow, making it have slight vig. Its not any wider than if you leave the lens alone. Just buy a Kenko .43x or opteka baby death if you have a low budget.
yea just take out the bottom lens becasue if the bottom lens is out it makes either side of the big lens look like a fisheye. i just keep it like it came casue if you flip the big lens to you get the same outcome but with more vig so dont even waste your time flipping the big lens just take out the litttle lens in the botttom
ledzeppelin is right. just take the macro lense at the bottom out and wala. i tested every posibility with this wide angle lense and just taking out the bottom element works great. Aspect 16:9 works best useing the mod. 4:3 just reduces the wideness and distortion, whis is what you want.
there is a setting ony our cam to fix that got to menu and i forget what its called but its under wind cut off and it wont shake. check outt my vids and subscribe and i will do the same
instead of flipping the lens, take off the macro lens in the bottom, makes it so much wider and has more barrel distortion, i just did this for my friends, its better looking to take off the macro.
ya dude, just on the ring where you unscrew it. Get a lighter (better if it's one of those wind resistant ones) and run it around the circle really fast for a few minutes
awesome thanks ill see if i can go today to get that, but will it fit my camera???? i think the name of my camera is DCR-DVD108 NTSC? Somthing like that. please reply anyone.
hey i did what you said in the video and the lense produces the fisheye effect but my problem is, is that the black corners do not show up? do you know how i can make the black corners appear?
thanks man. but the problem was my old camera. it had a permanent steady shot on so i couldnt turn it off, which made the picture shake. i work my ass of for quite a while so now im filming with a used but still amazing sony vx 2000
blow dry it with a hair dryer for a little bit until its hot then try unscrewing it with the screwdriver, will be a lot easier with out scratching the lens
Yo guys, just figured it out... get a pair of scissors... open em up into both holes and make sure you hold em real tight... comes off very very easily... Good luck everyone.
now my camera has really bad black edges around it. is there a way to like extend my lens or something to minimize the edges but keep the same fisheye? i tried just zooming in but it didnt look as good.
Hey, this is the same person as akabreakdownfilms. Spacing the lens farther away from the camera would cause even worse vignette (thats the black edges) Zooming is pretty much your only choice. You could also crop out the vig on your editing software, unless you use windows movie maker, then you can't.
bro, dont give up. It's really not that hard. And if you buy one of them crappy fisheyes like a Kenko, your probably going to end up modding it anyways.
you know how i got the ring to open. i used a compass, that thing that you use to draw perfect circles with. i took out the pencil from one end and replaced it with a paperclip. then i opened it up so it perfectly fit the two slits. it took minimal effort to unscrew it like this. =)
I did'nt know you played drums. drum solo video?
epzbarlow77 9 months ago
i did this thanks man
coleskateboardking12 1 year ago
ive got the same wide angle bro!!
EVANLINDEN16 1 year ago
fuckin thing wont come off
volcomstreetsk8er 1 year ago
how did you take it off just like that?
mine is being an ass and wont come off
RyanEnjoi 1 year ago
the thing wont slide off
MrAnimated 1 year ago
i got some sunpak fisheye footage, check em out on my channel
SteezyKids 2 years ago
how do you get them for free?
lespauldude82 2 years ago
what song is this?
eamovies90 2 years ago
@eamovies90 For some reason I'm thinking you didn't even watch the video..
AINTism 1 year ago
would you say the sony vcl-e07a or the sunpak is better?
whyskatecrew 2 years ago
mine wont come offf!!!! i swear i tried everythinggg
nname0922 2 years ago
neither will mine, and i just cut open my hand with a flathead..
ClarifiedBmx 2 years ago
the whole setups nice camera flat music lol
33fgfhjjggy6y 2 years ago
good choice of music :)
back2themusic 2 years ago
haha i got that lens for a dollar at my local camera shop !!!!!
xshredxthexgnar 2 years ago
haha i got mine for free at best buy lolz
DigitalGiraffe 2 years ago
ok listen. Great idea but heres the thing. All that you are doing is switching the wide angle element around so it casts a shadow, making it have slight vig. Its not any wider than if you leave the lens alone. Just buy a Kenko .43x or opteka baby death if you have a low budget.
Stepupprods 2 years ago
I hella used my fucking finger hahah
xplanbx17 2 years ago
dude can you please help me i tried everything to unscrew the black thing
a knife, cd, screwdriver, flathead, fork. I used all of them each for like an hour please message back.
leafrunner123 2 years ago
weak.
DavidMicelson 2 years ago
@leafrunner123 have u gotten it to work yet??? iv been tryin to
mizgetsabbbydrop 2 years ago
yeah I got it off like months ago my mom did it. lol
leafrunner123 2 years ago
Mine doesn't come off I tried for an hour to get it off
blacksk8ter13 2 years ago
did urs ever come off?
aron93a 2 years ago
Yea I got it off right after I read wut you told me
blacksk8ter13 2 years ago
cool beans... i got mine off today and i SCREAMED SO LOUD... i was oh so happy :) haha
aron93a 2 years ago
@aron93a how do u do it?
MrAnimated 1 year ago
what cam is that plzz
destricto1 2 years ago
why didnt you just buy a fisheye for like 40 they sell them for that much
username5431 2 years ago 3
i got the exactt same sunpak in this vid for 9 dollars new at bestbuy lol
russionlegion 2 years ago
Comment removed
dragonice000 2 years ago
got mine fo' free nigga'
DigitalGiraffe 2 years ago
yea just take out the bottom lens becasue if the bottom lens is out it makes either side of the big lens look like a fisheye. i just keep it like it came casue if you flip the big lens to you get the same outcome but with more vig so dont even waste your time flipping the big lens just take out the litttle lens in the botttom
SkaterPwnage 2 years ago
mine dosent move a centemeter please help it wont move and we are taking off the notch NUTHING WORKS please help
NateGrote 2 years ago
ledzeppelin is right. just take the macro lense at the bottom out and wala. i tested every posibility with this wide angle lense and just taking out the bottom element works great. Aspect 16:9 works best useing the mod. 4:3 just reduces the wideness and distortion, whis is what you want.
tetramedia210 2 years ago
ha this is the song that louie barletta and jerry hsu skated to in subject to change
thepigpod 2 years ago
For some reason , mine has so much vigg on the left side then left , helllpp
kevin4lyfe 2 years ago
Yo i gotta Jvc everio and i just got this lens and the vig moves around u got any answers??
ROLL4EVER13 2 years ago
there is a setting ony our cam to fix that got to menu and i forget what its called but its under wind cut off and it wont shake. check outt my vids and subscribe and i will do the same
gotskate8 2 years ago
its image stabilization or o.i.s. as Panasonic calls it. just turn that setting off
somerockenguy 2 years ago
hey roll4ever the third video in the related videos tells you how to not make the vig move
hbkfan54321 2 years ago
I just followed your tutorial and it works like a charm. It made it look a lot more like a fish eye
DahammerMan 2 years ago
i have that same camera i think it is like a mini vx
brisket990 2 years ago
Why not just buy a fishlense?
keyinregulus3 2 years ago
instead of flipping the lens, take off the macro lens in the bottom, makes it so much wider and has more barrel distortion, i just did this for my friends, its better looking to take off the macro.
ledzeppelin1178 2 years ago
you dont need to take apart lenses for this effect. all telephoto lens have fisheye
in reverse. video the front of the lens instead of the part screw in if you want fish eye effect
narcovice 2 years ago
damn,big ass camera
bradyroxursox10 2 years ago
my ring wont come off
thatsfreakingnargnar 2 years ago
does this work for all wide angles
Jesperkarmark 3 years ago
looks the same as before
GoHuckUrSelf 3 years ago
is thata 30 mm lens
?
Harrisabd 3 years ago
liking the thumb up at the end :-)
you play drums too?
ez,
b
steelyben 3 years ago
whats the diffrence between wide angle lens and fisheye???
SkatingIsntaCrime 3 years ago
wideangle doesnt have distortion, fisheye does. distortion meaning when you put it up to a square picture it will make it round looking
skater8au 3 years ago
this fisheye sucks
it is even worse than a kenko but a kenko is even cheaper.
why would you do this??
buy a death lens you cheapskate
BennetNick 3 years ago
well i dont have 300 dollars
i recommed u buy a bower .38x wide angle lens
KBTwinProduction 3 years ago
you be smugglin weed under those fingernails bra?
meowmastr123 3 years ago 6
just use a hair dryer for about 5 minutes and unscrew the ring. trust me it worked
tinyboy87 3 years ago
oh, i got it out, use a CD or anything that can go across the lense, it came out really easyly. Dont do the fire thing it could damage ur lense.
KBTwinProduction 3 years ago
wut if my camera doesnt have a steady shot!
wut do i do?
upthedrunks 3 years ago
im unscrewing so hard that my screwdriver is bending , this sucks
KBTwinProduction 3 years ago
i did it, heat the ring with a lighter. trust me.
CRAZYconTHEsk8er 3 years ago
really?
KBTwinProduction 3 years ago
where did u apply the heat? on the bottom? where you unscrew it? cause i dont want to damage my lense
KBTwinProduction 3 years ago
ya dude, just on the ring where you unscrew it. Get a lighter (better if it's one of those wind resistant ones) and run it around the circle really fast for a few minutes
CRAZYconTHEsk8er 3 years ago
did it come off easly afterwards?
KBTwinProduction 3 years ago
ya pretty much
CRAZYconTHEsk8er 3 years ago
this sucks, ive been heating if for over an hour and it still wont come off
KBTwinProduction 3 years ago
i've moded a wideangle lens before. But I'm trying to do the same to my sunpak lens, and it won't screw out no matter what tool I use. Any help?
CRAZYconTHEsk8er 3 years ago
yeah same here
ilivetoskate28 3 years ago
dude i have the same problem, it wont unscrew =[
KBTwinProduction 3 years ago
its new order.
i cant think what song tho
it will come to me soon
maxmachine21 3 years ago
cant i do this with a other wide angle ????
tou135 3 years ago
what song is this
sk8rman48700 3 years ago
i got the same camera
JustinSillaro 3 years ago
truth
shizzelnizzel339 3 years ago
hey thank you i got the lens and now i have a fish eye so thanks. ima go filming today and test it out
Sk83r17 3 years ago
awesome thanks ill see if i can go today to get that, but will it fit my camera???? i think the name of my camera is DCR-DVD108 NTSC? Somthing like that. please reply anyone.
Sk83r17 3 years ago
hey i did what you said in the video and the lense produces the fisheye effect but my problem is, is that the black corners do not show up? do you know how i can make the black corners appear?
notoriousbg5 3 years ago
i would think that its better quality if you didnt see the corners but got the same effect, maybe you did it wrong
tumyetostreetpirate 3 years ago
oh wait you probably should just zoom out to get the effect
tumyetostreetpirate 3 years ago
nice video whats the name of the song???
erkiur 3 years ago
way gnar! icant afford teh abby death lens right now for my Pvgs320 im buying this one for now!! thnx alot man!!
andygskatin 3 years ago
i bought a fisheye of amazon for 40 beans
pimpdaddylove 3 years ago
its so hard to take out that black ring. i still cant get it i dont wanna fuck it up. got any tips?
dyingtoliveRWTF 3 years ago
dude its so hard to take out the black screw part
chamichaelaire 3 years ago
what camra do you have the quality is sick!
ThisRandomBoy 3 years ago
thank alot man!!!
invisiballer3 3 years ago
thanks dude so sick
natttb123 3 years ago
thnx
riles2211 3 years ago
lol, i only got mine for 27 bucks.
littleskater29 3 years ago
were
riles2211 3 years ago
clean your fkn nails kid.
dont be a cheap ass just buy a fkn fisheyes lens
ruuustyvideos 3 years ago
thanks man, this saved me 50 dollars cause my mom bought me a wide angle for christmas and i wanted a fisheye, so thanks!!!
Mr21Krames 3 years ago
i cannot get mine open no matter how hard i try! i dont want to scratch my lens either!!!!
Calbob76 3 years ago
dude go to the local cam shop and ask if they can get the band off. they have a tool thats for it. they did my sunpak lends in like 1min perfect.
yellowman808 3 years ago
mine shakes wayyyy too much when i film. like waywayway too much. just look at my skate vid "auburn skate park". any suggestions?
GoodWoodSkate 3 years ago
take it off steady shot=)
stauffer105411 3 years ago
my camera doesnt have on off switch for steady shot. its awlays on!!!!
GoodWoodSkate 3 years ago
go to menu on your camera and truen it off it should be where the 16:9 aspect ration is
sk8rman48700 3 years ago
thanks man. but the problem was my old camera. it had a permanent steady shot on so i couldnt turn it off, which made the picture shake. i work my ass of for quite a while so now im filming with a used but still amazing sony vx 2000
GoodWoodSkate 3 years ago
nice those are expensive
sk8rman48700 3 years ago
lemme guess, that was a Sony TRV-900? right?
Kevmo837 3 years ago
no i think 330 my friend has that camera
sk8rman48700 3 years ago
dude theres a HUGE difference
thanks for making this, dude. favorited
209sk8er17 3 years ago
now ure ready to skate
Sisler6 3 years ago
nvm,i did it
BIG DIFFERENCE :]]
tnhx
Mautt913 3 years ago
such a good song.
maxmachine21 3 years ago
what song is this
sk8rman48700 3 years ago
New Order by Age Of Consent
TheLouisvilleSkates 2 years ago
is ther really a big difference between the original and the moded lens???
Mautt913 3 years ago
thats awesome but i need help how u did it i tried and it wont budge. help please.!
maserfacerjaser 3 years ago
OMG i love it thatnks so much u should watch some of or videos now trhanks alot
theset454 3 years ago
what song is this?
sk8rman48700 3 years ago
whats the differents between fisheye and wide angle
chrisk8a 3 years ago
More distortion but wider field of view.
Justdabomb2 3 years ago
i have one but i cant unskrrew it help
Iglooman222 3 years ago
i have one but i cant unskrrew it help
Iglooman222 3 years ago
dose it have 2 be that lens or can it be any wideangle lens?
krazyskater10 3 years ago
Probably any, just make sure you can unscrew it some how.
thefingerboardpost 3 years ago
fucking tight....now i gotta get money and ima go but a wideangle lense so i can try this....its cheaper than buying a fisheye
krazyskater10 3 years ago
you guys are dumb
it's aluminum so it's not real strong so when you do unscrew it hold it on the bottom on the small lens so it's unsrewed easier
or you could throw it in a bag then put it in hot water so it expands to make it easier
JohnnyHandrail 3 years ago
please how can i get it off screw drivers dont even move the ring
nollie360heel 3 years ago
nice optura!
bomb4u 3 years ago
you can use this on dcr-sr42 right?
J450 3 years ago
i cant get my ring thing off it must be super tight whats another way to do it without a screw driver im afraid to scratch it
nollie360heel 3 years ago
blow dry it with a hair dryer for a little bit until its hot then try unscrewing it with the screwdriver, will be a lot easier with out scratching the lens
mikelmarquette77 3 years ago
thanks haha ill still do it even though i just bought two fisheyes and a new wideangle ahah
nollie360heel 3 years ago
Awesome Mod, you saved us some cash
as it was stated a couple of comments back use a pair of scissors to lock into the two notches
it helps to get started unscrewing the lens
xlnyc 3 years ago
Awesome Mod, you saved us some cash
as it was stated a couple of comments back use a pair of scissors to lock into the two notches
it helps to get started unscrewing the lens
xlnyc 3 years ago
Awesome Mod, you saved us some cash
as it was stated a couple of comments back use a pair of scissors to lock into the two notches
it helps to get started unscrewing the lens
xlnyc 3 years ago
yourrrr dumb!
sketchcv 3 years ago
pretty good tutorial but the wide angle modify sucks i tried it its not worthy of a fisheye...
sketchcv 3 years ago
yea its much better but you have to change the aspect on your camera to 4:3 trust me it is 10x better
streetskater10 3 years ago
yo i cant get the black little riong thing off like the first step with the screwdriver:?
streetskater10 3 years ago
that sucks
LeapinL 3 years ago
you suck
thefingerboardpost 3 years ago
Yo guys, just figured it out... get a pair of scissors... open em up into both holes and make sure you hold em real tight... comes off very very easily... Good luck everyone.
silencethedrive 3 years ago
i couldnt get it open at all with a screw driver and it game off so easy with scissors thanx
sk8outsweat 3 years ago
why didnt you show it to us on the camera you were recording with
mopsa123 3 years ago
Because I didn't have an adapter that would allow the fisheye to fit the camera at the time. (this is the same person)
thefingerboardpost 3 years ago
the camera you put the fisheye on was a sony trv330 right??
stevieboy4 3 years ago
damn i love that circle thing makes it look cooler when your filming
noyellingkid123 3 years ago
hahaha
thefingerboardpost 3 years ago
now my camera has really bad black edges around it. is there a way to like extend my lens or something to minimize the edges but keep the same fisheye? i tried just zooming in but it didnt look as good.
tkurtz23 3 years ago
Hey, this is the same person as akabreakdownfilms. Spacing the lens farther away from the camera would cause even worse vignette (thats the black edges) Zooming is pretty much your only choice. You could also crop out the vig on your editing software, unless you use windows movie maker, then you can't.
thefingerboardpost 3 years ago
what camera and lens type is that?
Orener 3 years ago
c'mon man. like 20 other people have asked that, and have been answered.
thefingerboardpost 3 years ago
thank you.
my videos are gonna be way better now.
tkurtz23 3 years ago
thx fer the tips man i alsmot got pissed of that the wide angle lense i just bought sucked, but not no more!
snackeye12 3 years ago
nice english
thefingerboardpost 3 years ago
i give up, i'm just going to buy a fisheye if i want to use one....I don't feel like messing up and fuckin' up my lens,still asick video and song
independantSK8 3 years ago
wait a second
dont give up yet
i jsut realized in the video that he was turning the ring to the right which would normally make it tighter but its loosening it
if you didnt already notice that try turning it to the right
mistaende665 3 years ago
bro, dont give up. It's really not that hard. And if you buy one of them crappy fisheyes like a Kenko, your probably going to end up modding it anyways.
akabreakdownfilms 3 years ago
i did that with my panasonic wideangle...
00guesswho00 4 years ago
can't take top off. it is stuck
independantSK8 4 years ago
dude thank u so much like seriusly this realy help me out my video r so much better for skating like realy dude thank you =]
ru5150ed 4 years ago
its soo hard to take that fukin ring on top off...
Detelz 4 years ago
this takes too seconds and works good too
a really fish eye still gives a better effect but this is a close second espcially for the price
Sp3nSWA 4 years ago
do you think its a similar procedure with the sony .6x lens?
sixthgatebass 4 years ago
yo you should of done a before and after of the lens, just to see the difference, nice thinking though, haha
mikeszalowski 4 years ago 2
just fucked up my lens trying to get the gay top thing off
xgm199x 4 years ago
the ring wont come off...
help?!
joniswasted 4 years ago
grow some muscles.
elkinrules 4 years ago
im 12 i have none.
joniswasted 4 years ago
lol
elkinrules 4 years ago
you know how i got the ring to open. i used a compass, that thing that you use to draw perfect circles with. i took out the pencil from one end and replaced it with a paperclip. then i opened it up so it perfectly fit the two slits. it took minimal effort to unscrew it like this. =)
WTFPWNEDXD 4 years ago
thanx dude this rly helped, it makes the view much better
Faggit555 4 years ago
Okay....so why do you hat me?
akabreakdownfilms 4 years ago
dude I hate you. My ring wouldnt budge, I pushed so hard and almost ruined my lens. I pushed both ways
MarshallManiacJTM45 4 years ago
I have this lense but Im thinking about gettin a kenko .43 for like $35. Should I get anew lense or just do this to my old one???
MarshallManiacJTM45 4 years ago
oh man
greatest idea everr!!!!!
thank you soo much
i was stuck with using my wide angle for filming
ccchaaaddd 4 years ago
THANK YOU... GREAT TIP... does anyone knows if this len works with an aiptek?
cavf88 4 years ago
got it off!
independentsk8 4 years ago
how do you get the ring to move? Please comment back.
independentsk8 4 years ago
just gotta pull man! Thetres no other wat to say it sorry!
akabreakdownfilms 4 years ago
the ring wont move for me...i am putting a lot of force into it and yes i am going the right way...it just wont move
heydude246 4 years ago
Thank u so much the fisheye looks great
skatererick13 4 years ago
thanks a shitload d00d this is amazing
almostextreme101 4 years ago
thanks! i really apprecitate it
solidskater900 4 years ago
thank you so much
Skaterboibithes 4 years ago
I bought that as Best Buy. and i modded it. If you didn't figure that out by watching this video then I just cant talk to you.
littleglad 4 years ago
can you gave me the link of the site web where you buy your fisheye plz!
maxsk892 4 years ago
its Age of Consent by New Order. Yeah I am the same person as akabreakdownproductions.
littleglad 4 years ago