50% EDGE 540
10:16
Added: 4 years ago
From: TamiyaExperienced
Views: 194,373
Sort by time | Sort by thread (beta)

Link to this comment:

Share to:

All Comments (113)

Sign In or Sign Up now to post a comment!
  • Not very impressive. I too do model flying. But never add so much of pollution to the air just to enjoy this great hobby. 

  • They said i could be anything i wanted i wanted to be...so i became a helicopter. 05:26

  • @munky40903805 Zzz, I didn't read that through properly.

  • This is not a 50% you have been ill informed as the one in the vid is a 40% Edge 540

  • hahaha watch how their trying to get the propel going around gay moves rofl

  • too much smoke D:

    

  • lesson learned, if your not gonna hover really high you better hover really low! that coulda been alot worse!

  • That might be the coolest knife-edge ever.

  • why dont you just buy a helicopter ! LOL ! Great video !

  • dam!!!! thats an amazing show! I fly rc 3D and i havent seen a edge 540 looking so good!!! :D thumbs up!

  • 5:20 SMOKE FEST!!!

  • that knife edge pass at 4:20 is soooo sick

  • no way that is 50%, i know the size of the real ones, and this is more like 30%, just think about it, if you put the 2 next to eachother they would NEVER be the size of the wingspan of the real edge!

  • Gotta say, I love the Edge. Yak, Extra, Sukhoi, CAP, sure they're all good in their own ways, but they're definitely NO EDGE!!

    And that doesn't look like a 50%, looks more like 33, or mabye 40 at the most.

    Still awesome though, no matter what the size.

  • that is not 50% but 25%

  • essa fumaça toda ai, é assim mesmo ?kkkkkkkkkkkk

  • what a plane.. what a pilot...what a video... awsome... hey you didnt run him out of gas did you!!.. super kool.. im going to show you my very humble edge 540 foamie... its nothing like yours though.. but i can fly it well.. this was a very fun video to watch... i subscribed!!

  • Good vid tooka while to get to the actually flying. If u wanna go to the flying go here 3:14

  • 50% thats 1:2 scale!

  • rich biitch!!!!!!!!!!!!

  • god. i hate the end when it crash lol

  • i want one!!! lol

  • whats the top speed on ur plane?..i'm not into gas yet...I only got a 50 inch F-16 with 70mm brushless electric ducted fan..it does 80mph..i'm planning on getting a cheap gas powered for starters tho..Nice pilot tho

  • it´s a lot of power in that engein =)

  • sweet. are those extra300s's

  • is this a hempel plane?

  • Now that is how to enjoy an rc plane!!!!

  • can u give graphics of this plane?????????

  • what does 50% mean?

  • no bitch

  • theres no way those are .50

  • Loved the video guys. Great flying and Spectacular planes. I'm just starting in RC but I dream of having an aerobatic ship like an Edge/Extra/Cap etc. By the way, robbie77300's logic is undeniable (to quote VIKY in I Robot). 1/2 scale = 1/8 volume.

  • That smoke system is on crack!

  • Nice flying!

  • Gingerbatics

    It's my 50%, I also have a 60% Extra, 50% wingspan is 146 inches x 2 = 292 inches or 24,33 feet the full scale Edge wingspan.

    As for the smoke it's a TME smoke pump with separate power, trick is always install pump behind and below tank, I also mix smoke with throtle, I prime before starting the motor, works every time.

    Thanks for watching

  • Very Nice!!! Nice smoke system on th edge!!! Like to hear your tips on the installation.

    On the 'Scale ' Debate, i've never understood it, I fly a 35% Cap232 And fly a full size 232 and the measurements just don't add up! If a model is 50% of the full size it should be half as big, or am I missing the point. For example the spats on the 232 are 36" long so 50% would be 18". Correct me if I'm wrong. Any I digress, Nice flying and sweet looking machines. Keep em coming!

  • Good question..I fly a 35% yak and like you said, it don't add up. And if the plane in the video is a 50% shouldn't the pilot in the plane be half the size as a human? Gingerbatics if you ever get the answer to this mind boggling question please let me know...lol.

  • Well 50% is 50 percent in 3 dimensions, so really its half in 3 directions which is 8 times smaller. so the pilot would be 1/8th the actual volume of a real pilot

  • Is that really so?

  • well if its half the wing span then i would think so. If you take a cube 10 by 10 by 10 then its volume is 1000 units. half scale would be 5 by 5 by 5 which is a volume of 125, and sitting beside the full size cube it would be dwarfed.

  • @robbie77300 ooh, thank you

  • Tell us what the full scale Cap 232 is like in the air. Is it unpredictable in some contexts like the 30%?

  • @cobaltjones

    The 232 is an amasing machine! For comp's she's the best. She's very lightly loaded and has lightning responces. Depending on the R/C manufacturer, the model is very similar, but if you're running a heavy set up you can get the wing to break out very quickly like on the heavier wing 231. As for 3D there both terrible in my opinion. I prefer a Yak/Sukhoi/edge anyday!!

  • Hey man! Very NICE!!!

  • muiiito bom gostei

  • thats a damn impressive this model... im very lucky about my 1.8m extra XD

  • what engine does this thing run on

  • what does the percent mean?

  • The percentage of the real size version, so 50% means it is half the size of the real plane.

  • Comment removed

  • notice the one that had JR on it was the one that crashed

  • please tell me how big that smoke tank is

  • Not sure how big it was, but if I remember correctly it was probably 20-30oz if not more.

  • Are you pre heating the fuel at all? or is it direct from pump to muffler?

  • Lol you hover it enough why dint ya fly an helo instead. Nice vid tho!

  • Ok I thought 30% and 33% were pretty fkin cool. When I see this 40 and 50% stuff, I cant help but think, why dont they just build a real fuckin plane? Duck tape 2 50%s together and hop in, go fly it for real.

  • a camada de ozonio !!

    agradeçe !

  • im 15, my best model is an extra 330l cmpro with a cheap 45cc crrc pro engine, i fly a friend of mines 35% 100cc twin extra and im sure if i had the money he has i would be in the champs by now haha, well going for my b cirtificate this saturday hope all goes well.

  • Tell me how big is your smoke tank? and what pump you are using? thanks

  • i thought he sucked until the harrier rolls

  • thats a 40% carden Edge 540 and it belongs to Elie ( SNAP A SAURUS )

  • His yellow 540 was bigger than the two 40% in the foreground. Plus he told me himself it's 50%. Want to argue? Argue with him.

  • those  are 40% not 50%

  • Why don't they just buy a helicopter each??

  • those look more like 40% not 50%.

  • HOVERING IS Fun to watch for about 30 seconds After that FORGET IT

  • Try it some time.... you'll have a realistic opinion then.

  • nice smoke

  • Good !!! View my channel and ' domvauld '

  • for certain peaple

  • what's with all the hovering, it's cool for a little while but doing over and over gets pretty old, it's really easy to do also

  • Fantastic! great close up of control surfaces doin' thar stuff at the end.

    Thx

  • No....3w's are junk....send it to me and I'll dispose of it for you....lol. They are top notch engines pal.  If your pappy's pal gave you one then he likes you a lot....what out for him.

  • can someone tell me if a 3w 150cc is a good engine cause my dads friend gave me one and another thing, what size plane could i put it in?

  • i wonder how many people got there hands or fingers cut off from starting those engines by spinning it.

  • They mostly just break a couple finger

    no one has acctally cut there hand off

  • I have had several heli's and fixed wing aircraft. Since I started building and flying back in '81 with over 145 planes and 15 heli's I can tell you! Flying these giants give you the best thrill you can have with an RC aircraft. Yes heli's are "Cool" and I really like them as I fly them... but when I want "Aerobatics" then of course I'll grab a TOC Flyer and have a blast hands down.

    Keep up the good flying fella's!! NICE!

    AW

  • buy heli

  • I wanna see one of those hover and land on a really short distance? is there a video of that? cus i have a great place to fly but i cant set my edge down there! (its a farm)

  • How much would one of these cost? including the engine and the servos?

  • You probably looking at 2-3K or more!

  • Helicopters are cool, but they can't put on a show like this

  • @shawnspohn shure they can but not the scale helicopters.

  • Plane are more insane

  • its like an orgy of realy kwl planes

  • We have a nice event late July early August at Woodstock airport in CT, we call it Flying Giants Huckfest, come on down you'll have a good time, there will be over a Hundred of these airplanes, thanks, Elie

  • Guys this is my plane, it wasn't that bad to fix, I replaced 2 elevators and the rudder, plane is still flying, I will have a 60% for next year with a 3W 342 for power, a lot bigger than this One and it hovers too.

  • Probably the best experience I had that year, thanks for the great show!

  • He has those too....

  • why? planes hover just as well

  • wow,you got my Respect !

  • no offence but prop hang got very boring

  • hover.. hover...hover...Buy a helicopter.

  • oi man i ham having some trouble hovering me edge 540 on the simulator, i dont think that it is right because it is not hovering the same compared to the one in the red and yellow edge in this vid. i dont know if the setting and that are right on it for the control am useing on it, someone said that i might have to down load something to make it the same a real life, my sim is called Easyfly2. can u give me some help

  • nice planes. sucks that the engine cut out. that happened to my extra once, except i was hovering a little higher than that and it stuffed the nose of the plane right into the ground.

  • what chemical do they put in the Edge 540?

  • kerosene

  • why were they smoking soo much??? smtg rong with them???

  • nothing wrong with them, it's just smoke for effect. There is an additional take with fluid injected into the exhaust to create the smoke.

  • ok, i was like "what the heck is going on here". lol

  • nice video, love those big planes. sucks about engine failure but its part of flying. hope you got it fixed.

  • Wasn't my plane, but the guy is a pro flier and flies for different fun fly events. I am sure he has no problem getting it fixed. He uses $300 CF props...LOL.

  • yeah Tamiya, I know all about this type of flying been flying since 1989. I fly mostly

    3D now, self taught. i relise hes a good pilot and these planes do cost some serious cash

  • Y aI think he said the last plane he was flying(in the video) was around 10 grand and I thought my helis were expensive!

  • k dude helis are good and all but helis will never beat 3d freestyle and IMAC!!

  • should have bought a helicopter stupid

  • verry nice flying im thinking of getting a edge 540 electric

  • Dont look too good for the enviorment. lol.

    Great though aint they :)

  • i know arc direct have a 43% edge 540 with a da 150 in it and it hovers at half throttle.

  • ya know ....a little hovering goes a long way...

  • ITs proabbly got a 275 (3w)

    Nice FG logo

    BADASS ;)

    Steven

  • a DA150 will never pull this model....

    Its a 3W 275 two cylinder in it. Thats a 3.7m Plane!!!

  • gpilatti i think its normally the DA150 or known as the Desert Aircraft 150. But idk it might be a different motor in that plane.

  • they sound cool when they start up

  • What engine this model uses?

  • Wow, incredible!

Loading...
Alert icon
0 / 00Unsaved Playlist Return to active list
    1. Your queue is empty. Add videos to your queue using this button:
      or sign in to load a different list.
    Loading...Loading...Saving...
    • Clear all videos from this list
    • Learn more