hi great video... quick question though ... how do you eliminate the odor of grow room meanwhile using co2 enrichment like this??? im gathering research and eventually going to be using LEDs and using a 10' x 10' tent .. any input would be greatly appreciated thanks
Hey man nice video i have a couple questions how big is that tank ? and how long appropriately does it last? and is it worth it using tanks or should i get a generator ?i have 4*4 tent with a 400 watt hps and i have temp problems and have a intake and exhaust running 24-7 . any feedback would really help thanks
@tonypltkush looks like a 20lb tank. 1 lb of CO2 is equal to about 8.5 cubic feet at normal temperature and atmospheric pressure. good news is, high temps help the uptake of the co2, so you actually run the garden higher than you normally would. humidity becomes a bigger issue tho. your tent, 4x4x6 is 96sqft x .0015(1500ppm) = 0.144cubic ft of co2. you just need to figure out how fast it uses all that to time the applications. probably like 5-8min every hour. 1 tank would last you a while.
@tonypltkush I can't shut my exhaust fan off either or my temps will reach mid 90's in my 4x4 tent in short order. The only solution I can think of is to run the light fan intake from outside the tent, and run a separate fan for the carbon filter.
How many cubic feet is that tank and how long does it last? You have a co2 ppm meter that controls the valve.....Y don't you plug the regulator in that?
i have the exact same tank and regulator set up, but im still curious to know where the floating ball should be, like should it be on top of the gauge indicator lines or should the ball be located in the middle of the line for the actual flow rate of that specific gauge. also on the flow chart the numbers on the colored part are minutes right? just making sure. cool video by the way. PEACE.
@schnicklefrittz calculate how much co2 you need in terms of cubic feet, then set the valve at whatever square cubic feet that will achieve that in about 10 min or until your line freezes up.
Valve on the tank stays open always. The regulator's solenoid controls gas flow. The solenoid only allows gas to flow when it receives power via a timer or CO2 controller. Thanks for chking out the vid...
Very informative video! Putting a regulator on a CO2 tank is a great idea because it allows the grower to control the amount of CO2 that he puts in his garden. Thanks for all the great tips! I just want to ask if there is another way to add CO2 in an indoor hydroponics garden aside from buying a CO2 tank?
hi great video... quick question though ... how do you eliminate the odor of grow room meanwhile using co2 enrichment like this??? im gathering research and eventually going to be using LEDs and using a 10' x 10' tent .. any input would be greatly appreciated thanks
SuperCAKEBOSS123 2 weeks ago
@SuperCAKEBOSS123 would i still be able to use a basic can carbon filter?
SuperCAKEBOSS123 2 weeks ago
this video is much more informative than the last one i watched....
TokenTombstone 1 month ago
Hey man nice video i have a couple questions how big is that tank ? and how long appropriately does it last? and is it worth it using tanks or should i get a generator ?i have 4*4 tent with a 400 watt hps and i have temp problems and have a intake and exhaust running 24-7 . any feedback would really help thanks
tonypltkush 5 months ago
@tonypltkush looks like a 20lb tank. 1 lb of CO2 is equal to about 8.5 cubic feet at normal temperature and atmospheric pressure. good news is, high temps help the uptake of the co2, so you actually run the garden higher than you normally would. humidity becomes a bigger issue tho. your tent, 4x4x6 is 96sqft x .0015(1500ppm) = 0.144cubic ft of co2. you just need to figure out how fast it uses all that to time the applications. probably like 5-8min every hour. 1 tank would last you a while.
TeamGRN420 4 months ago
@tonypltkush I can't shut my exhaust fan off either or my temps will reach mid 90's in my 4x4 tent in short order. The only solution I can think of is to run the light fan intake from outside the tent, and run a separate fan for the carbon filter.
bkpickell 3 months ago
Nice the dude abides ;)
geovs20 5 months ago
How many cubic feet is that tank and how long does it last? You have a co2 ppm meter that controls the valve.....Y don't you plug the regulator in that?
holditnowhitit420 5 months ago
i have the exact same tank and regulator set up, but im still curious to know where the floating ball should be, like should it be on top of the gauge indicator lines or should the ball be located in the middle of the line for the actual flow rate of that specific gauge. also on the flow chart the numbers on the colored part are minutes right? just making sure. cool video by the way. PEACE.
schnicklefrittz 10 months ago
@schnicklefrittz calculate how much co2 you need in terms of cubic feet, then set the valve at whatever square cubic feet that will achieve that in about 10 min or until your line freezes up.
TeamGRN420 4 months ago
Valve on the tank stays open always. The regulator's solenoid controls gas flow. The solenoid only allows gas to flow when it receives power via a timer or CO2 controller. Thanks for chking out the vid...
TheDudegrows 1 year ago 3
Do u leave the valve on the tank on while its running on the timer even when the timers off??
mferreyra420 1 year ago
just checking out your channel dude, recommended by sublbc, great stuff dude, a priviledge. thankyou
rizlablueslim 1 year ago
Very informative video! Putting a regulator on a CO2 tank is a great idea because it allows the grower to control the amount of CO2 that he puts in his garden. Thanks for all the great tips! I just want to ask if there is another way to add CO2 in an indoor hydroponics garden aside from buying a CO2 tank?
citigarden 1 year ago
how do u feel about using seltzer water as a source of Co2. Whats your opinion?
calliopered3 1 year ago
another good 1 for the books......love the vids. keep em coming. Peace.
QcReppa83 1 year ago