How not to unload an excavator.

[v1ctorzava1a]

that shyt wider than the trailer y wouldnt tip a lil bit

[milkman826]

im with every one else... shit ramps... but job well done

[MakBlower]

haha

[shroomze]

Those ramps will never be the same again

[Royalhighlander]

He did ok I move equipment like that everday but I use a beavertail lowbed and sometimes the tracks are wider than the trailer .. now unloading in winter with ice and snow etc .. thats a different story.. check my vids to see what its like from INSIDE loading excavators and dozers

[sealteamnavy]

That will make your *sshole pucker up!

[st8pl8guy]

Meh, he got it off. Just like yer mom got me off! Bada-bing!

[generator5500w]

EPIC FA..!! huh? ohh sorry my bad, job done well

[NHVFD1828]

Honestly? I would need to change my shorts after that thing slipped.

[JefEmora]

I'm guessing they also got that thing on the truck with those ramps, so imagine how that would have gone

[tmixjr68]

you didn't even need to use ramps if you're good enough=lol

[themeaningoflife38]

most companies suck dick

[MrMuddwolf]

I do this for a living, for all you people that think he did something wrong you should put yourself in the machine and see if you could do any better, those ramps are pointless, that was the problem from the beginning.

[noiwillnotcomply]

Construction companies where I live don't even bother with ramps.

[godzillasballs]

he didn't do such a bad job

[MissThomas97]

NEXT TIME JUST GUN IT AND JUMP IT OFF

[haydnglv]

Lucky then ramps didn't give way :/

[ghostdevill]

I wonder when the right track brakes down!

[macman216]

i think he just loaded his pants

[praingmantis]

this vid is nothign compared to what i have seen. bleh.

[hpjunky70]

Big deal pencil neck.

[MattWesss]

That didn't went too bad.

[mixmaster547]

mabey if he fit on the truck in the first place

[Nickbesaved]

its off the float no damage done

[oldnstale1]

not broken nothin' to fix. Like flying, any landing you walk away from is a good landing.

[TheStihlboy]

no harm done! happened to me a few times

[mrgerminaro]

close call...

[3dvorator]

that ramps are steel,good for rubber wheel sloader not for steel tracks,put some block of wood in that ramps lol

[macocwbyz72]

no harm no foul

[OP52RI]

it just slipped... when I was driving low bed trailer, I always had on the ramps some kind of non slip material... never did happen that our track machinery slipped... nice and slow...

[notavailable101]

Im curious why you would use the bucket ,,,,,,that is what caused it

[SoCalDualSport]

@notavailable101 using the bucket is correct. Local 12.

[rawimpact]

oh shit look at 0:15

lebron traveled

[Vire70]

Lol... look at that back ramp bend.

[famasmaster2000]

I'll have what he's having bartender !!!!

[Festivephone1979]

What was wrong with that? He got it off the truck, job done.

[mcbodo]

@Festivephone1979 remind me to never hire you for a job.

[whitelion44]

Grandpa Transformer goes in for his 200K miles check up

[TheHyenaKing]

actually this unload was fast and perfect !

[usmcoth]

That could have been much worse. He could have pop a tread or flopped on his side. That was a successful dismount. 

[Darkermandeeper]

You fuckin rough cunt

[Ismalith]

I think the last tire from the Truck is totaly destroyed

[goatguy1001]

did you see the for hire on the back

[Videoguy1991]

probably just the truck driver unloading it

[greatwhitetailhunter]

might need a new set of ramps but....it's ok

[MrAcewyatt]

your fuckin fired

[abelucious]

nice landing captain

[OHSOOOFLY]

amatuer operator. He should have had the arm on the ground taking most of the load off, that also would have kept ot from sliding sidewaya. amatuer.

[buttmanroad]

WHo Scratched the Trailer???

[boylej47]

what a tit

[TheSteamPoweredDude]

Not his fault, The ramps have No traction for those tracks, & the ramps dont accommodate for the Wide Load. I'd be more worried about the trailer getting damaged unloading that then the machine having any issues......

[freakytristam]

thats terrible but it works!

[ScArKiLLa45]

whatever works!

[boomerg98]

butter unload it on the side lol

[emutiny]

looks like he got it done to me

[Arabhacks]

He did well given the equipment.

[Royalhighlander]

LOL Thats how its done guys.. I move equipment on a beaver tail trailer ands thats how its done.. maybe that lil side slide wasnt good but

[rbalbury]

whats wrong with that! he did a great job!

[VooDooAssassin2]

i bet that guy power dewed all over himself

[IanBudgep51]

got the job done

[MRSketch09]

Wow, that was scary.

[zoomeroo12]

FUCKING IDIOT

[IgniterKing]

Thats standard procedure for truckers.. So yes that how they do it.

[wolfteam121213]

thats not how im suppost to do it? Shitt.

[1ightweightSukka]

And people always wonder how things get bent up...

[notavailable101]

@moddedwarfare113 not high enoff to flip

[TitanOne1]

those ramps are a joke to begin with... 

[vinnievincent85]

@TitanOne1 why is all the profesionals on youtube and not outside working????

[TitanOne1]

@vinnievincent85 im not a professional, but its kinda obvious. but they worked!

[bigkruntry]

metal on metal = very little grasp

[TrebleClefRobert]

Wow, nice save.

[buchmoyer]

I hauled them for 25 years,this is  one of the reasons i NEVER used ramps to unload them,they will "walk "off the back with a little help from the bucket.

[CircsC]

@buchmoyer True, but this guy is kind of an idiot about it, he sits there pushing against his hydros...

[elvergillas23]

hahaha he said fuk it .....

[AlBarathur]

Is that ramp was proper he would not have slipped like that, though I will admit he had that arm a bit too close to the excavator.

[gregboyds]

@AlBarathur No he didn't. You don't know what you're talking about.

[AlBarathur]

@gregboyds Actually I do know, if that arm was in a more open angle in front of the sliding excavator that would at least have reduced the slide and mitigated most of the impact. But open in less than 90 degrees ( from what I can see in the vid) that helped little preventing the slide. Having said that I think the first problem is the ramp, and knowing it was such a sudden ramp, the idiot giving signals should have been extra careful to indicate when the excavator is walking out of the ramp.

[Blackboilingrobotoil]

Note the "spotter" with his arms crossed as he drives off the trailer. Good lookin'out man!

[toyomore]

SHIT HAPPENS!

[Embrikkkk]

What can you say? steel on steel is not good, that could have happened to the best.

[CoDCrazy007]

well it worked

[samuel209]

squueeeeeekkk!!!!

[roydora]

shitt happens on stepdecks

[210twhite]

can we get some new pants for the operator?

[shoveitupyaman]

bet ya the operators asshole puckerd up on that one

[MrCordova2013]

I love it when I like something, and I click it, and im the 69th guy to like it(:

[Ekatjam]

I do it for a living. Wrong trailor for that machine, should have used a low boy. The guy did a good job considered he had metal tracks on metal ramps and and is coming at a steep angle. You need to use bucket to keep you strait and let you down slow

[MrTikiboi]

what a fukin idiot operater

[PlebScrubber]

lol

thanks for the ride truck driver, sorry about the ramps on your trailer :D

[mccarterjg]

Not as bad as the last one

[graunchgear]

Thats Off

[woelber74]

tires would fix that problem!

[USFullOfLies]

Wow smart move!

[LordHannigan]

Not nearly as bad as the one that tipped over in the other video.

[Skoda130]

Time for a high speed pursuit! Hit 'n drive!!!

[warzdune]

Guess you got to find some dumb dropout to do the dirty work.

[LeeStuart93]

number one rule when off-loading like that = once you start theres no stopping! aim and go for it instead of doing what that tool did!

[diegomayan]

"...I always unload it that way..."

[nathanial41]

Guy in the back hoe was like "What?"

[azas1]

moron ...



[literbikedoc]

Very easy to do without matting, steel track on steel bed/ ramps = very slippery.

[shakeywooley]

hid butt hole just puckered up so tight you could put coal in and 2 weeks later it'd be a diamond

[89S10BlazerProject]

not pretty but he got it done didn't he?? hahah I mean that was the point wasn't it?

[volvoknightoftheroad]

new seat covers required.......... lol

[thepopeis1]

ooo look hes for hire

[SCRWOOD]

FUCK IT'S WEEDS

[jeremylewis83]

ol dude says "whuut, shits unloaded ain't it"

[ballsthatclank]

Might need a new set of ramps after that one.

[mra2z]

@ballsthatclank Might need a new set of pants!

[italianjob1100]

would not like to be near him working if thats the best he can do fucken amature

[Th3EminemSh0w]

let alone, how'd they manage to get it on there in the first place...?

[TheStihlboy]

no harm done, rock on!

[daftendire]

like a boss



[Givarius]

@daftendire Hahaha, good comment

[TheMozbi9]

Ez nem gépkezelő,hanem egy nagy balfasz!

[yamahabansheerider]

i love how he just roles away like NOTHING happened lol

[superdutykid1990]

I did that with a CAT 365c when my dad let me unload for the first time when i was like 8 lol

[ReCiMaFiA]

flawless !!!!!

[digging555]

slow up slow up no wait *crash* ah balls

[digging555]

horay for captin durp

[mongration]

good operators never use ramps

[Spanrz]

@mongration Wait till you get a hose burst, then we'll see who's a good operator then...lol

[mongration]

@Spanrz um ok... I will be waiting.... waiting... waiting... hmm... this is very boring waiting for a hose to burst, what was ur point again and why should i be waiting for a hose to burst?

[mipmipmipmipmip]

pfew...

[AronFigaro]

Given the size of the trailer, that could've come out worse tbh. You trashed a ramp and maybe damaged a tire. Not exactly big-ticket expenses compared to the possibility of rolling an excavator. Fair cop on that one.

[TheNameIsBEATTIE]

Only loaded and unloaded Twice, and both times couldn't really see much, so had banks man, hated both, hope to never do again, But if its a job to be done, then will just have to get on with it.

[moparerrnocar]

WTF's the problem????

[1noble1]

slowly slowly slowly..... fall off, dont look, ok flat out!!!!! lol

[MrWhistlejacket]

Just another day at the office...

[ProctoLogic]

worked very well anyway

[MrGoochtickler]

it's off isn't it!!!

[kargmeister1337]

thats what lowboy trailers are built for.

[muchadoaboutnoting]

I used to know an old timer who drove a large Cat, D9 size split bucket front, track drive, and he transported it on a low-boy trailer. But he was too lazy to split the low-boy, so he'd back it off the back of the trailer, over the tires. He was an excellent operator and was gentle as he did this, but he must have thrashed his tires after some time.

[dominic11t]

you don't need to have your shovel touching the ground like that

[boomyfool20]

do u know u have the wrong trailer to be loading or unloading an excavator

[sentineloffreedom]

That trailer must've gotten pretty ripped up. I'd be pissed if I was that truck driver lol

[bikramjeet001]

Excavator just rolled away like..."i didn't do nothing"

[neilbee]

Sorry driver - Ive just fucked your ramps up.

[GameplayOfCombatArms]

Now imagine him working.....

[KNGarver]

I remember when I learned to do that.

[a300b4f]

Hahaha it says for hire on the back

[warpedapple]

the guy up there says he loads and unloads them all day long....

what a job.. what a job. hope he knows they are ment for digging , not just getting on and off trailers

[Reshoe87]

good enough for me

[virus56777]

god forbid anyone use the right trailer

[slspg]

Ouch, needs more experience

[ConstructionCentral]

*title*i agree

[lillivagabond]

prendi il badile che e megliooo

[cjone33]

no ramps is the way to go less time flipping them up and down more time working or hauling

[uni000ver000sal]

Obviously they don't have drug and alcohol policy in your work place!

[rpblcan]

noob driver

[darensmiles4]

he got pretty lucky as far as i'm concerned....

[AtomicTom21]

omg i just shit my self..... hey guys i just shit my self, check it out

[ConstructionCentral]

@AtomicTom21 south park gag ( joke)

[TheTrimzor]

no damage done? i don't se the problem exept shit in and on the seat...

[mait95]

Excavator kick´s his NUTS! ;)

[frozenfarm]

thumbs up if your balls went up in your throat watching this haha

[MrJuanesparza]

that is not a skilled operator

[666GWAR666]

Hahahahaha. if someone did that where I'm working he hadnt been operating for a year afterwards:P

[sstroh08]

not very pretty but at least he stuck the landing lol

[rebelvanner01]

volvo 418 im from belgium here its cald a diggingcrane (graafkraan) yor from sweden and 20 year old by yorcomment i gess yor more a 12 year old i dont call name's when sombody comments in there Språk

even in yor country they say grävmaskin not excavator

[caseyr1992]

i give that landing a 3/10

[mcduff21543]

This could have gone a lot worse.

[rebelvanner01]

never use metal ramps for a crane

[volvo418]

@rebelvanner01

That aint a fucking crane you cunt. Learn the differences between a crane and a excavator before you comment again. Bitch.

[shastaervin]

so did that guy get an ass chewin ?

[cabrussell]

thats textbook by my companies standards!

[veldaman]

just rolls onto the job site like no big deal

[jonbearsmt]

@veldaman lol  i was thinking the same thing!! ha ha WTF at the ramps.

[45Mang]

"fuck it, already hit the floor, mind as well unload". lmao

[itsme53aus]

well if it works it works

[realjoefriday]

Glad I'm not a betting man. I would have put the rent down on saying that those little ramps wouldn't have held up. And I woulda lost.

[nhRoadhog01]

I only have one thing to say "Dropdeck"

[the731272]

it was a peice of shit anyway 

[filmcostar]

we will never hier those clowns

[lnbarber]

notice the for hire sign

[izaatmusic]

thats what happen when you put an ex military battle tank driver behind the crane controls..

[bohrokthunder]

the wierdest thing is that there calling excavaters backhoes,they are excavaters stupids!!!!!!!!!!!!!!! not backhoes!!!!!!!!!!!!!! backhoes have two things a bucket in the back for digging and a big front shovel to unload and shovel things!!!!!!!!!!!!!!!!!!!

[dunn98632]

Did he have to change his pants after that move.

[Mrchevyman208]

You dont need ramps!

[shrek5959]

new boxer shorts please lol