How To Build a Launch Ramp

[APPLEproductionsUK1]

they need more curve

[ZZZhiloZZZ]

would this be good for bmx??



[FlyingPigletBagMan]

@ZZZhiloZZZ It would be better with an extra surface sheet and switch some of the supporting 2x4's with 2x6's

[suppersready45]

Thx man. We built fun dock jumping ramp :)

[FlyingPigletBagMan]

@suppersready45 Hell Yah

[JustinMRobinson]

are u tking bought masanite

[FlyingPigletBagMan]

@JustinMRobinson yeah. My mind just went blank

[FlyingPigletBagMan]

email baughman.christian.d@gmail.com­ for any ramp plans

[theshan2307]

nice thanks i alrdy build it awsome..........

[bluntkid123456]

cool



[alex123456789ander]

thank's this was verey help full

[np2207]

Keep makin videos

[comedyesp]

alwsome job on the video - easy and quick

[Ch3vyK1ng98]

Nice!!!

[Joe123415]

wait, so you have to screw?

[SKATERDUDEMARVIN]

nike sb zoom tre?

[minilogo2282]

dude its amazing im trying to build one...

[Hamiltonsk8borders]

why go throught all that trouable when you could just buy one from walmart for like 15 bucks

[iloveskatein1234]

@Hamiltonsk8borders because walmart ramps are cheap, plastic, and shitty.

[FlyingPigletBagMan]

@Hamiltonsk8borders They slide

[im1da1king]

think ur talking bout massonite

[FlyingPigletBagMan]

@im1da1king yessir

[ThePITBIKEboys661]

nice can you make a halfpipe : )

[FlyingPigletBagMan]

@ThePITBIKEboys661 I have one in my back yard,and i have built some for friends, pretty simple

[bluewidow4826]

love the way he just tosses the sharpie off to the side lol

[rjclarkevideos]

i bmx so i made mine a little higher and farther so thanks

[hihihi646]

how high is your ramp without the coping and how long

does it shoot you up a lot????

[FlyingPigletBagMan]

@hihihi646 this one was 2 feettealland 3 feet long. shormeover my moms car.

[FlyingPigletBagMan]

@hihihi646 2 feel high. They shoot you up different heights depending on your stencil and speed. The one in the video could jump a small SUV.

[LoGiiKzgaming]

why dose every 1 show off in vids

[FlyingPigletBagMan]

@LoGiiKzgaming ??

[marcosquezada1]

awesum thanks man

[jakepennington1]

thanks

[mannnich]

screw, screw, screw you

[SimplyAClan]

@mannnich I was just typing exactly that :)

[sk8x4ever]

u r the most homosexual faggot i have ever seen

u dont no how 2 make a good video and every1 who likes this video is also gay as fuck

[bmxerboy0123456789]

thanks for the vid it worked good to ramp my bike into a lake

[MarineW2510]

thanks, your the first person that does a good vid on how to make skate ramps

[gmakkahotmail]

the surface wood is masonite

[sk8forlif22]

thanks for the vid...it hepled alot

[BaZZmuZ]

ohh thanks it helpt me much :):)

[iloveicecreamtrucks]

this is very helpful.

i made mine a bit wider so it is a more of a bank

but still really awesome.

[linkinparklyrics12]

thanks i am going to build this

[Bripper96]

NICE

[TheHeavyshooter]

I go crossing in the woods and built ramps and than we collect a lot leaves and put a thin layer of soil or sand so whe land very softly if I crash but now I building a huge one. I will post a video.

[jrwiggles96]

i had a half pipe at my old house it was awesome

[356peacemaker]

@jrwiggles96 did u build that mini ramp all by ur self or u looked for someone on the internet if u did tell what website or phone number

[jrwiggles96]

@356peacemaker i made it myself well the only thing you have to do is find blue prints and start thats what i did btw it was a actuall halfpipe

[scootersareme123]

thats mad

[nedk09]

when you cut out the side pieces you can masking tape the 2 pieces of wood together this saves time and means they are identical

[TheMicrochip55Hacks]

lol i like screw screw screw screw screw

[skaterdude258]

try using 2x2's for the cross pieces.

[krashRacingAndMotoJo]

The stencil was made from masonite

[TheIbrahimabbasi911]

nice

[MuxxTV]

u dont need coping but good advice ill sucscribe u

[LOVEHATE121]

nice work mate i just made it took 4hours and it got a fucking hole

[DBAPCrew]

Hey everyone! It's me on my new channel . Please subscribe and watch the bids onthe other channel

[bluewidow4826]

nice vid thanks hepsed alot didnt cost over ten dollars and have only ramped my bike

[FlyingPigletBagMan]

anytime

[LOVEHATE121]

how much it cost?

[FlyingPigletBagMan]

well, i payed $40 and made a spine transfer, a kicker, and a manual pad.

[phatbeats77]

@FlyingPigletBagMan hey man can you please tell me how to make all that stuff? i just started skating like 3 months ago and i want to learn to get alot better. Problem is that i can't go to the skatepark everyday so i need my own ramps. Any Help? id like to get something to learn to grind on and all that stuff you said the spine transfer the kicker and the manuel pad.

[FlyingPigletBagMan]

@phatbeats77 just emailme at 6992534 @ gmail.com

[wolffirepaladin5]

@FlyingPigletBagMan where did you get your materials from?

[FlyingPigletBagMan]

@wolffirepaladin5 homedepot

[WILLFORREALZ]

you people and your nice ramps. i made a ramp out from sheet wood off a crate holder from publix and plastic crates. its not as good as that one though. so thx for the help

[FlyingPigletBagMan]

any time, if u wanna know about any other remps, send a message

[PinakArt]

@FlyingPigletBagMan i have a section of stairs in my front yard that is a plat form, and there is a drop from the platform to my grass yard, it is about 10 or 15 feet. i want to build a ramp witch i can drop down on skis. how should i go about doing that?

[FlyingPigletBagMan]

@PinakArt Email me at 6992534 @ Gmail . com . Kinda complicated

[H34dshotMickey]

@FlyingPigletBagMan i wanna make a quarter pipe for a backflip on mtb

[nbapro1998]

@FlyingPigletBagMan hi how thicks the ply and did you do anything to it to get it to bend ?

thanks

[Badgerfan20]

can u jump a bike off that

[FlyingPigletBagMan]

yes you can

[TheShotstopper09]

nice ramps

[GlobeSkatecrew]

i think the smooth surfacing is called masonite

[FlyingPigletBagMan]

it is, my mide just went blank

[jojo922ify]

doesnt that cost around $60

[FlyingPigletBagMan]

$40

[chekkis]

how much money did you waste on 2 ramps????

[FlyingPigletBagMan]

i payed $40 and made a spine transfer, a kicker, and a manual pad.

[sk8erboy136]

o o o ok thanx

[HarrysonTucker]

how high is it

[FlyingPigletBagMan]

2 feet

[321caca321]

lol i live in fl to and its pretty cool

[er1crk]

you can die there...

[odysseybmxguy]

this thing is soooo fun i built one for my bike its sick nice job dude

[gluehead88]

great vid!!! i will make 1 just like that! me and mah buds ride bmx bikes ALL the time.GREAT VIDEO!!!

[darkdusty13]

your pretty cool dude, i would skate with you if i wasnt stuck in stupid florida, i hate the heat here

[Vickgrandtec]

I live in florida and it aint half bad cept it always fking hot

[FlyingPigletBagMan]

where in FL

[FlyingPigletBagMan]

in in georgia

[tim9128]

its masonite aka hard board the thing tht u didnt know tht name of

[FlyingPigletBagMan]

ya my mine just went blank

[Sixersfan921]

Two times!! lol nice vid and ramp

[waylonrules20]

its called Masonite

[FlyingPigletBagMan]

ya i no haha. my mind just went blank. hahahahahahaha

[buster693]

can u use tht on bmx

[FlyingPigletBagMan]

make it longer

[JFCRAZE000]

dude this is cool and were do u get coping????

[FlyingPigletBagMan]

home depot

[calebpost]

thank you i bilt one just like you and i love it but i am using a mounten bike and a bmx .but it works just as good thank you

[thankgod4sk8ting]

was that you at the very end

[calebpost]

yes. it was me at the end

[FlyingPigletBagMan]

hahahahaha

[FlyingPigletBagMan]

nope it was jerry hsu

[First1Sub]

nice structural engineering :) like to help me with mine?

[FlyingPigletBagMan]

sure

[BuildingTrees]

how did u get it to bend?

[FlyingPigletBagMan]

it bends easily. but if your wood wont bend, place it on your frame, and soak it with hot water (with a towel) then put something heavy on it. u may have to repeat

[Rage5923]

Wow youuur amazing at building

[FlyingPigletBagMan]

thanks dude

[dirtdude232]

how much?????

[thankgod4sk8ting]

make a video about how to make a grind box

[FlyingPigletBagMan]

soon

[litllesscooter]

i love yuu i am soo gonna make 1 to learn flips!!!ty man

[douglas1321smith]

can u build a bmx ramp thats is longer and show me cause i wanna build one

thnx

[jdesean23]

tell ur dad i said good job...jk lol

[FlyingPigletBagMan]

my dad is not even allowed in this country

[jdesean23]

step dad, grampaw, mom ,uncle idk i was joking tho i made one like too except i toook it apart cuz i was gonna make it wider

[FlyingPigletBagMan]

nope. all by myself

[bigbadbrutis]

You should try make it longer so theres a smoother transition at the bottom. Besides that its nice.

[FlyingPigletBagMan]

nah, i purposly make it steep so i could jump my moms car

[jiawei18]

wads stencil

[Guindastre12345]

make an other but test it. ;D I wanna see if realy works. =D

[FlyingPigletBagMan]

dont worry it works. but I will probably not put another vid on it. I will make a different kind of ramp if you want. just ask me to and i will

[weddas3]

where do u buy the coping from?

[FlyingPigletBagMan]

hardware stores, or you could just use PVC from like hom depot

[SlynerProductions]

"Get your stencil, chuck it" lol.

Nice though

[streetBmx1000]

hey dude you got the right idea but not so steep but that is pretty sweet i was wonderin if you skate or bmx msg me back

[giggity000]

im thinken the same thing i couldnt grind something that small im guessing skate

[Duffyung]

he skates that explains the two skateboards

[FlyingPigletBagMan]

i made it steep for a reason. i am going to try to jump my mom's ford explorer. And i skate

[FlyingPigletBagMan]

skate

[rossie101]

man ur a ledgend

would this be safe for a bmx i weigh about 9 stone and im 15 uears old

would this be ok

thanks m8

rossie

[FlyingPigletBagMan]

well you would want to make it shorter than mine (unless you are really good) and you would want to put 2 sheets of ply on the top instead of one

[MrErikKow]

sick. I'll make one

[lookamonga1]

how did u set the coping? wut did u use

[Duffyung]

PVC pipe

[ZmanZoo]

its alot easier to use a long peice of wood and with a nail in one end and a penil in the other like a big compass instead of the stencil. also it helps to but a really thin sheet of metal at the bottom for a smooth transition that with last. other than that not bad

[FlyingPigletBagMan]

yeah, i did do the compas method to make the stencil, but since i make a lot of these ramps i just made a stencil. i put a sign at the bottom usually

[crobecrew99]

next time cut an inch more off the 2x4 so the surface plywood will go on top of the side pieces of plywood

nice ramp

[FlyingPigletBagMan]

i usually do i was just too lazy

[FlyingPigletBagMan]

to make they cost like $30

[FlyingPigletBagMan]

but that is if you make a huge one and go above and beyong. i made four of them

 for 50 bucks

[VenySketch]

il just buy 1 :)

[GodZillerKiller]

great vid thx man

[oollyy33]

thanx it worked heaps good you were a big help =]

it worked so go we are gonna make another one

[skateboardingssick13]

scooters are gay

[FlyingPigletBagMan]

i skate not scooter

[elite151474]

aweet dude i qwill rate 10/10 and i will subsribe . good ramp man!!!!!!!!!!

[f4llenSk4ter]

make a vid of u using it plz.i dont know if its the size i want.plz

[FlyingPigletBagMan]

i gave those ramps to friends, but if you are a skateboarder i suggest 1' high and 2.5' long

[TheTinyDangerous01]

I'm going to build one now since I have nothing to do.thanks I'm a scooter