FREE ENERGY FROM AIR CIRCUIT PART 8/24

[ptrakk]

do this with a flag of aluminum foil at the end cause i beleive the coils are resisting via induction causing the separation of the alternating energy to build up so if you have a better receiving antennae that should make it to where it might blow your stuff haha. i'm going to attempt this build too. when i get my camera working i will share my findings.

[INVENTOR3]

@ptrakk Alum flag, hmmm, good idea. I tried plates and spheres. Coils are tricky, i believe they are tuning the circuit. Yes, please share when you get your camera working :-)

[ptrakk]

@INVENTOR3 Cool! will do. i just opened the camera up and it is a burned tiny npn transistor. i have to figure a way to replace it haha.

[20fireman12]

@INVENTOR3 Use a donut coil for your antennae

[INVENTOR3]

@20fireman12 I will have to make a Rodin coil soon, thanks.

[rainmanp7]

Dial it into a radio station and watch what happens :) hint* hint* use a crystal radio ? It might help. Thank you for experimenting.

[INVENTOR3]

@rainmanp7 I know what you mean.  But im after differant frequencies. Im thinking of tuning it to the schumann ferequency and see what happens,,,,,i would most likely have to change my antenna length and other components,,,but it would be interesting. Thanks for thwe comments bro

[lennchma]

What about if you connect this circuit to load? I think the voltage would drop down to maybe 5 volts. Because you have 2 large coils, they're working like a condensator (induction). They are now fully charged at 76,3 volts.

[INVENTOR3]

Yes, drops down. checking power with load are on video 16 i think. I dont rmember what it droped too.

thanks for your comment.

[growtallerkey]

hey you may try ferrite core to further increase the voltage and current

[INVENTOR3]

Check out video part 16.

:-)

[popupyou]

try an aluminum plate or sphere coated with some sort of dielectric like a varnish of sorts, and the mount it on the top of your tower.

let us know what happens!

[INVENTOR3]

did you see first comment on this page?

I have tried 18" dia sphere and 14" square copper plate, but only on 12 foot high set-up....i did go from like 5V to 7V.

The sphere gave me a little more because it has more surface area, but yes, i would like to try them on top of pole now, 41 feet high....but next i want to try a screen on top, maybe 1/2" mesh or chicken wire.

Your thinking is on the right track.

Thanks for comments.

more testing this friday, tomarrow.

I will keep informed.

[alex681219]

Nice...!!! you can improbe the circuit with kmlwire and hoockedup a joulethief :)

[INVENTOR3]

i just read about the KML wire!!! Looks interesting.

about the joulethief....i forget...does bendini have this patented or did he give this to the public to figure out.

also thinking about incorporating teslas bifilar coil.

I will try some of these things soon.

thanks.

[overunitydotcom]

Great circuit,

please can you share a circuit diagram ?

Please come to overunityDOTcom and

explain it.

Many thanks.

Regards, Stefan.

[INVENTOR3]

Hey no problem..big fan of the site...love the site! Great group of people. I spent a lot of time studying the wipp mag devise there(pmm).

I may have to wait to middle of week to post stuff there....i was'nt sure if the site would be interested in this. It is still in the begining stages, not much power yet. Thanks for the invite. Im sure i could get a lot more help there.

[INVENTOR3]

i did not forget about overunity.

i will make it there yet.

I know i will get more help there, and i will have to be prepared to invest more time in responding to people there.

more testing today! New videos soon!

[brmdunn]

Way To Go!!! Thats the highest Volts I've Seen yet!! Thats more like what Tesla was saying about having a big cap or it would build till it burnt out.I havent gotten to work on mine due to work : ( Thanks for sharing. Tec

[INVENTOR3]

hey..thank you. glad you like my work!

hope you find time to work on your projects

[sebsworld0]

You should try and charge a 12v battery with this.

Apparently you can get more watts if you tweak this to retrieve background ratation, by putting up a insulated reflective plate. patent 685957

[INVENTOR3]

Hmm, i have not charged a battery yet, i do feel confident that it will work.

I have many notes on that particular patant. i have tried a 12 inch square insulated reflective plate....i got about 2 extra volts...but that was only with a 12 foot high set-up. I got better results with an 18 inch dia sphere...it does have more surface area. I will have to add another guide string for my antenna pole set-up, to make it sturdy enough to support the sphere. next i will try adding a rolled screen.

[INVENTOR3]

Hey!! Congratualations on the baby!!

I hope he/she will be a great scientist. hehehe

[Joebundy]

Nice work..:)

Have you tried to make your circuit with lets say 6 diodes in series and 6 caps in series? The diodes should be the 1000Volt type and the caps radial ones with about 400Volts and 47uF. That should increase your voltage and also amps.

[INVENTOR3]

i will try this. Thanks. I will let you know how it turns out.

Thanks again for the kind comments.

[scarlejr]

KEWL! This is good stuff. You know how John Bedini's has a circuit that uses practically no amps and just volts to charge batteries.... Maybe with this set up you can run that circuit and charge up some 12volts?

[INVENTOR3]

Yes, i thought about it. I just found out about his motor only 1 year ago. It was frustrating because i had same idea, and old drawings from 6 years ago to prove it.

he beat me to it!!! now i feel that i dont want to use anything from him...dont want to incorporate someone elses stuff. Maybe im beinmg a little pig headed.

dont get me wrong....i think Bendini is a very smart man, and i really admire his work.

[INVENTOR3]

Thanks. DC after rectifier circuit.

[boxa888]

great work! maybe i should hook up those huge ones i made and see what happens lol. if u can get it to charge faster you can use a capacitor to create a dischage making a higher current, like the tesla coil design, u charge a cap to a high voltage and then discharge it to get a huge current, time the circuit to discharge at a fast time and there should be alot more power. wow! great i guess i should start doing this again lol thanks for keeping the info free too!

[INVENTOR3]

Yes, i would love to hook 1 of your coils to the circuit. Hmmm, capacitor....not sure....if low current to capacitor, maybe only low pulses per second, or only 1 pulse per sec. or maybe only 1 pulse per 5 sec. On Teslas devise, did it ever mention about how fast his wheel addvanced each click, or how often his devise discharged? you know what devise im talking about :)....i know you got his patents printed out also:)

[mitchelltbatten]

Nice !! Are you reading ac or dc after your rectifier?

[Can101276]

Pirate88179, is having some good results with a magnesium fire starter brick in his earth battery, and I've heard zinc is also a good choice.

What happened to video #7 ?

Thanks for sharing.

[INVENTOR3]

Ahh, yes, i see his videos now. Wow, yes, nice results. Funny, when i first started this project, i could not deside weather to make free energy from air or do the earth battery...well, you know which way i went. Soon i will be tuning my tesla coils.

video #7 should be up now. And yes, i will still deffinetly try zink, i almost forgot about trying the zink.

[Can101276]

Nice work Paul.

In my previous comments I refrenced nikola tesla's radiant energy patents, and your experiment is looking more and more like his design.

Have you tried a shiny metal plate at the top of your pole?? I think tesla just polished up a steel plate and varnished it to prevent corrosion.

You are right about the ground deeper is better, but have you tried any different metals for the ground??

[INVENTOR3]

i have tried a copper plate and an 18 inch dia stainless steel sphere, but on a less high set-up. It does increase voltage a little. I want to try a screen on top. i did try s.s. rod for ground & 1018 mild steel rod. not much differance, but maybe i would see a bigger differance if i went deeper.