Computer Build Timelapse

[cowlefrbeify]

bigger the cooler is, bigger the problems are...

hahaha

[DCurt2287]

haha I have the same heatsink, coolermaster right? took me a few mins to do it. I dry fitted it first then applied a little thermal paste and squished it down while gently turning it from side to side as to make the paste get in the cracks of the heattubes. how long did it actaully take you to put the heat sink on, it looks like a long time.

[TheMrbootstrap]

1:51  FOOODDD!!! :D

[aw34a4]

ur like a weirdo at cpu cooler part

[chrisros1997]

lol i rofl'd when i saw the part of the heatsink

[superclaw900]

for some reason this music makes me crave for ice cream and to go outside

[killersullo]

ICE CREAM MAN!

[Slaterking2010]

I would have gid up and used the stock cooler.

[lewisu2088]

I wouldn't mind having trouble with the heatsink... What i would have a bit of trouble with is sitting down for 3 hours and bending as you did. Maybe it would have been much easier on a work table or bench :p

[ThePenguinProduction]

haha having trouble with that heatsink lol

[WTCHME]

@YouHaveMetYourMaker How did the build go?

[YouHaveMetYourMaker]

@WTCHME Great. I really need to upgrade my monitor and speakers though.  I just found them lying around my house.

[Anton338]

lol fucked up the compound? xDD i see that alcohol ;D

[crowman131]

you put thermal on both the cpu and the heat sink??? =/

[N1m1l]

oh god.. i just bought that exact same heat sink.. i hope i don't have as much trouble installing it as you did! what was the reason you kept having to redo it??

[smilesdp]

@N1m1l We were trying to hook the heatsink into the mounting bracket after screwing down the mounting bracket. If you hook the heatsink on first and screw it down all together it is much easier. The only thing is it is harder to predict how the thermal compound will spread this way since you can't really aim the heat sink down.

[chaosrealm93]

@N1m1l which heatsink was it?

[N1m1l]

@chaosrealm93 Sunbeam CR-CCTF 120 mm Core-Contact Freezer CPU Cooler. i ended up not even figuring out how to get mine on because i'm a noob at computer building and the instructions were kinda vague for me. i realized how to put it on right after i'd already gotten things together. gonna install it later on lol

[chaosrealm93]

@N1m1l lol. k, i'be sure to avoid that cooler on y builds.....

[G00SE216]

nothing better than building a pc (as long as it doesn't smoke on startup).

[raheemisbad]

LOL VERY GOOD PC GUYS but you failed with the heatsink

[TtomTtomT92T]

:D sweeeeet im doing my first build tomorow cant wait.

[raheemisbad]

@TtomTtomT92T YO I AM 17 YEARS OLD CAN ANYONE GIEV ME HELP ABOUT BUILDING A PC I AREALDY GOT A BIGDERT AND I HAVE BEEN SAVING UP FOR A YEAR, I AINT STUPID I JUST DONT WANNA FUCK THIGNS UP CAN SOMEONE PLEASE GIVE ME ADVICE IT WILL BE A CORE I7 930 SETUP ! WITH A SUS RAMPEGE 2 EXTREME MOBO WITH 12gB OF RAM and 1 5850 card 2 60GB SSD with one !.5TB for storage, please people give me ADVICE

[gerry410]

I'm going to do my 1st build soon. I decided to follow Tom Hardwares $1500.00 build that won the contest. I figure its a good way to not make a mistake in matching components. They used the AsRock mobo and I was wondering if you have any suggestions of where to go to get good instruction on how to pull it all together. I have modest knowledge and hope I'm not getting in over my head. Thanks man, looks like you did a good job.

[AllKidsOutNow]

That was awesome!

[NIN1024]

I love PC's, my dad hates it when his old laptops go out.... i love it because i can scavenge parts

[damianoem15]

Hah nice ;]

The SIms speed 3 xD

[NerdTronX]

wow unhappy heatsink much?

[meisieClanGeneral]

you should invest in a table... Nice video though! =)

[meisieClanGeneral]

you should invest in a table... Nice video though! =)

[3D8n52DmV37EI6oHeX]

30min for build and three days for Overclock (bios f*ck) that how it must looks like

[jaggedspike]

loool you tried ages with the heat sink lol.

[D4rkSyd32k7]

i had tons of fun building mine, it took me 2 days because neweggs items came in at different days. it worked out though i had 24 hours to test my wc loop :). my girlfriends pc only took about 2 hours

[johnnylightning258]

wow, not to be rude. But the worst thing you can do is put a computer together with your socks on without a ESD strap...

[lysenko133]

LOL they cant get the cpu heatsink on

[addzkebabs]

thats a fast time lapse of 3 hours! an hour per minute, sweet!

[verbindingsfout]

I almost build PC's weekly, the last time i finished the build in almost under 10 minutes just the standard budget PC with the stock cooler 1 dim no GPU stuff like that.

that PC made me 90euro's all in 10 minutes. :D

[Socketassault]

i just built my first computer. Couldn't do it all at once as I have no time and am still in high school. But I took my time and read everything...So it probably took me around 4 hours. all in all.

[geforceoc]

nice vid man took me about 3 hours for my first build as well, my last build "4th" took me 1 hour.

anyways were you eating @ 1:52? because that's like the biggest no no for me. I wouldn't recommend eating while working on a computer.

[esebcarfreak]

Wow, your kind of slow, lol. Takes me 1.5 hours or less usually.

[chrishowtovideos]

@esebcarfreak you do you realize that he was reading manuals right so therefor it could be that this was his first time building the computer so therefor 3 hours isn't bad plus reading manuals

[esebcarfreak]

Hmm, ok, I agree, a first buid, 3 hours is not that bad.

[chrishowtovideos]

@esebcarfreak yup

[mudvayne852]

my first build took me about 30mins lol xD

[bizboy1313]

Perfect. Nice idea to use manuals. Not all are great, but it's a start to preventing problems.

[19stephen34]

HAHAHA... Fail on the heatsink.. LOL

[Rowsol84]

CPU coolers are always the biggest pain in the ass. :)

[TheRomanCandle790]

lmao the heat sink looked like a pain in the ass to install.

[uwanaugoda]

noob lol but nice

[shawnygz]

lol the cpu cooler takes up like half the video

[4ourTimber]

lol, the cpu cooler seems to give u some problems

[MrDavid2222]

1:51 nice legs and nice computer build!

[Rockton23]

jaha...nice

it´s allways the cpu ... : ))

[zaheerali]

nice

[gaming0wiz]

Very nice job, thats the first were I have seen someone read the manual, "your never to good to not read the manual" can't remember who said that but it's true every model is different.