18 Minute RC Plane Build

[theminingfish]

can you please put some plans on cus i tried to make it how you did but i could not get the right shape.

[guitarrockval]

donde le pusiste el centro de gravedad?

[PimpHandsStillStrong]

what was the length of each side

[PimpHandsStillStrong]

thats cool!



[PimpHandsStillStrong]

where did you get the motor and others

[justfly60482]

Great job

[divemakings]

how do you get the signals from the remote to get to the plane. if its a chip what chip and what remote

[goonminiclips47]

for some reason i love all your videos

[Tsavah]

It is kind of strange I woke up thinking about super simple RC flyer builds using 1/2" thick insulation board. Not bad!  I see some inspiration here, but in my dream it was a PBF that kept getting modified after a few good flights until it looked more like an F-15 or F-22 build, keeping it real simple. Once the PBF had the newbie flying well, the next modification would be added, and a few dozen modifications later a bigger, jet looking RC flyer was born. Thanks for sharing.

[MagicalPonyFromMars]

I've been really wanting to make an rc plane, but don't have TOO much money, but on average, to make a plane like this one, how much would it be?



[XXXOG123]

can you tell me all the electronics you need to build this making my own Thanks.

[bog785]

hi, what is the thickness of the foam ?

[rc18trocks]

@bog785 1/2 inch

[bog785]

hi again , but what thickness ? please

[bog785]

hi, would like to build something simialar to your plane, have already cut out the template shapes ready to transfer to the foam, but what type of foam is it and what thickness ? i,am based in the uk, thanks. ps really enjoy ur flying video,s thx

[rctestflight]

@bog785 its insulation foam

[darrindwp]

So in total to get an actual flying model where the motor did not fall off would be about 30mins?

[GTranch2]

Can you make a more instructional video

[GTranch2]

How wides the bottom and how wides the top

[GTranch2]

How much did it cost to build

[liderlllf]

man can you make a tutorial for noobs expaining about the reciver, motor, battery, and how you can conect it.. and ofc where did you buy it .. please i want to learn...

[ajatkinson2004]

Man i wish my neighborhood had mountains like that!

[kingsizedmidget]

this kid is skilled and chill c: sounds good to me.

[krishnapraveen777]

how are you controlling the direction??

[witchdoctor88]

Dude you have restored my faith in the youth of America. Awesome!

[supkiller01]

you started at 844 and ended at 958 18 minutes doesnt make since

[Ghanem99999]

how much did it cost you?

[spaceherpes1]

i like building homemade planes there so easy an most fly very well i dont even get ever thin exactly rite most is done by the naked eye,if you ben flyn rc planes along time than u pertty much get the idea how things go together an wer the cg usually is toward the front on things like he built an most planes just try not makem to taill heavy then it gets aggervateing gettn the proper or ball park figure of balanceing off. nice job mine look like that but 3ft long i called it the iron board,

[daditown]

COOL :D

[fairboy13]

now just put on some little wheels and it will be gr8 :D:D

[breezerabbitz]

An inspiration to us all!

[vizzuleyes]

Hey Rctestflight, awsome job. I would love to see other vareations of fast builds. Oh and freedom of speach is something that you should earn not have. There are some dumbasses on here.

[ourjordan1]

this is mike (haddadrc.com) 

[ourjordan1]

i have done a plan in 10 min..........in my dreams..lol

nice job

[SKYNETDUO]

Is there different prop that can be fitted into that? or does it come with it when you order it ?

[Socom1Skip]

how big was the length of the tail

[Hobby331]

Flies so great that I've build one too. But mine flies so bad! Do you have some dimensions you could post?

[ricglos]

zip ties , dude, will keep your motor on , no matter how much torque the motor puts out!! TRY IT CUZ THEY ARE CHEAP and can be cut off with scissors or box cutter, 100 for 79 cents!

[hallobaaaby]

Super nice flying characteristics! Is CG somewhere around 1/3 of the triangle's hight towards the tip?

PS : what kind of dorks wouldn't like this video!

[plair473]

If you build me one just like it i will send you $35.....minus the receiver of course

[BBBag147]

Dont understand the point in this. Surely something you want to spend time over. Took you over an hour anyway, pussay!

[up2Urc]

What Is the thickness off the foam board that you are using?

[up2Urc]

What Is the thickness off the foam board that you are using.

[TheRichybuk]

nice slippers



[Iwmunt]

Hi, nice wing. Shame it took 1h 14 mins for initial build!

[9nl]

Lol, I love your comments when you reply to people your always so straight forward.

[PatrickMediaHD]

can you send me a list of the parts i need :D

[RCcrAzY1234]

what do you use to cut that foam??? mine always comes out really bad and bumpy

[rctestflight]

@RCcrAzY1234 a knife

[TheDownloadfreegames]

@rctestflight why everytime something should fall of while flying lol??

[Kpilot786457]

@RCcrAzY1234 you have to cut slow, layer by layer. dont try to cut the whole thing in 1 cut. it dont work. cut slowly in layers.

[rndm121]

What kind of foam did you use?

[SPIKEwillKILL]

where do you get the foam and how much $ for how much foam?

[rctestflight]

@SPIKEwillKILL home depot

[SPIKEwillKILL]

@rctestflight but how much moneys? for how much foam?

[RCcrAzY1234]

@SPIKEwillKILL you can buy a 1/2 in sheet for about 8 bucks at home depot

[SPIKEwillKILL]

@RCcrAzY1234 thanks

[RCcrAzY1234]

you should try vertical takeoff with that thing or even put rockets on it

[Trenajh]

i dont understand the plans

[Trenajh]

cooooooooooooooooooooooooool



[TheTyler0953]

I SUBBED!

[michaelsmead]

Do you have plans so I can build one?

[rctestflight]

@michaelsmead you dont need plans, just make a triangle with a fin on it

[thewanderer916]

@rctestflight Yea, but is it possible if you could please put down the measurements of the triangle and the fin? please.

[thewanderer916]

@rctestflight yea but, i tried to do it, and it crashed...plz give specific measurements pleassse, or plz do another vid on hwo to do this airplane. plz.

[Kpilot786457]

@rctestflight Hahah that made me LOL

[orandaboy]

THE SONG IS MICKEYMONTZ:instrumental club dance rap beat 37

[lolsalad100]

you freaking cut ur foam on the carpet D:

[orandaboy]

SONG??!!

[magicmike1122]

motor came off twice, prop comes off, people take your time with building planes XD

[Karelg7]

verry nice dude :p

i'm trying to make a plane to and this one doesnt seem that hard

can u give me the things i need to make it ?

greetings

[jordannw2010]

U live in a mint area

[bimcomvim000255]

what is the name of the music in the end of the video?

[RaTsA0007]

Lol... that school..

[johnoconnor99]

what a nice place to live. scenery is cool

[FlyingAvenger]

very cool, can you show the specs you used to build that plane please?

[FlyingAvenger]

very cool, by the look of the area you live in i take it that you live california right?

[orandaboy]

@FlyingAvenger utah

[risoan]

18 minutes in the title but over 1 hour on the clock. So title lies.

[womackke]

That thing is boss

[danfish101]

where did you get the sevoes and motor and stuff

[Mobil179]

what s your transmitter' s name and how channel does it have ?

[rotupotu]

epic moment at 4:33 "jetfighter flying at the sun"

[FunCamTV]

18 min???? you started at 8:44 and finish at 9:58 ??? that is more than 18 min...1 hour & 14 min

[rctestflight]

@FunCamTV no

[ReDnEcKrCrAcInG]

@rctestflight maybe if you quite being high you could keep track of real time you fail horribly!

[RCthings1]

@FunCamTV he sayd that would pause time

[womackke]

@FunCamTV That is true lmao

[legoliker7517]

@FunCamTV well he probably took breaks of course

[Russionassassions121]

@FunCamTV lmfao i noticed that too i was like wtf????

[RobinnTech]

Did you used a V-Tail mixer or what? And from where is the motor mount?

[TheAdventuresClayMan]

1 person had the record for fastest plane build before this.

[junaidunderfined9]

cool man :P

[rcplaneman96]

that's really cool building a rc airplane in 18 minutes how do u do that?

[tomtom4867]

what type of foam is it you use??

[rc18trocks]

can u use just elevator and rudder on a delta wing?

[sjiyuey]

your really good @ that stuff for 18 minutes

[goldylox1414]

wat do u use to make the frame and how much does it cost

[rcpilot14]

what song is this

[shervin07]

lol you drew the stuff from before though, bet those took a long time

[rctestflight]

@shervin07 nope

[RCthings1]

@shervin07 it is a triangle shape that doesn't take much time

[unitedheavy]

could i use a microjet v3 motor on it?

[flyboy6753]

would this plane work with a 1100kv brushless outrunner motor

[rctestflight]

@flyboy6753 probably

[Kpilot786457]

thats the exact same stuff foam i use!

[rc4wd101]

@Kpilot786457 wat is it

[Kpilot786457]

@rc4wd101 pink panther insulation.

[flyboy6753]

what type of servos are those. HXT####

[rctestflight]

@flyboy6753 htx 9 gram

[flyboy6753]

hey dude im a big fan of u, and im building this plane, but I have one problem

I have and esc, a reciever, a transmitter, two servos, and a knockoff bluewonder from hobbyking, and i have a pink foam board from home depot, but the problem is the elevons. My reciever and transmitter can do the elevon setup. I can do rudder and elevator though. If i made the whole back strip of foam the elevator, then I made a moving rudder on the rudder , will it fly?

[rctestflight]

@flyboy6753 you could just buy an elevon mixer

[flyboy6753]

@rctestflight ok but would the thing i said before work?

[rctestflight]

@flyboy6753 i dont know

[flyboy6753]

what is that pink foam stuff called? where can u get it from

[rctestflight]

@flyboy6753 home depot

[MEskandar1881]

please can you post in writing what are the equipment you use, i;m not an rc pro.

[mrfourtysevenman]

you should flatten down the tail. make it longer horizontal than make it longer vertical. more speed.

[RCthings1]

whats the song

[RedDevilSquadron]

well the stuff came off cuz you rushed the build...but wat the hell you built it and it flew. And ill bet you itd fly EXACTLY the same if you didnt bevel the edges. An airfoil isnt beveled edges...its a leading and trailing edge. Maybe try the KF airfoils (an extra sheet 2/3rds down the plane and a bevel the trailing edge of the top piece. Then you might knotice a difference. But good job man

[MrNerfmod]

i just made a plane like this with a 40 intch wing span.it glides like nuthing ive ever seen!!!!!!!!!!!!!!!!!

[p3x197]

That song is awesome,You know what it is called

[12860682321]

dude it took you like 20 mins to build that plane

[rctestflight]

@12860682321 really?

[JettaManDan09]

AWESOME MAN...

[tomascontrerasjr]

dude you lost an hour?!?!?!

[MrNerfmod]

how tall is the vertical??

[rctestflight]

@MrNerfmod 8

[herseydimnd]

Very nice - great job!

[aldudio]

is this just a made up model?

[rctestflight]

@aldudio ya

[MrNerfmod]

what is the wing span and whats the kv on the moter???

[rctestflight]

@MrNerfmod 28" 1400kv

[newbutgroundsbrandon]

nice plane fore 18 min.

[ricande]

0:55 Running up the stairs... ROFL

[EMPrcRacing]

You Inspired me to make my own delta put it together in around 32 mins but i made mine a bit different from yours I have the prop located on top to save it from ruff or hard landings. Also mines made out of Double Stacked Foam Board. I love it though Great job!!

[hlbatesjr]

You're awesome man. Great job.

[catamaranman333]

Holy vertical stabilizers Batman!

[anderman72]

Cool video and an awesome project for a boring day! Impressive!

[NevilleRCUK]

@rctestflight

what foam do you use?

[rctestflight]

@NevilleRCUK insulation foam

[NevilleRCUK]

@rctestflight  thx

[RickRR22]

Nice vid, but I was wondering how do you get the CG right on these planes??

Happy flying

[rctestflight]

@RickRR22 i just guess

[remotecontrolaholic]

ZOMG KITTEH you move your hands quickly! LOL

[wildhover]

man, that's about the same amount of time it takes me to hit the snooze button and roll out of bed! nicely done

[toyotatruckin]

Good job!

[kydawg1]

Awesome.

[michelXShawn]

i have to say, your gona go on to be someone important later in life haha!

[synman95]

combat time hehe

[knifeedge63]

whats motor speed controll and battery are you using? it seems to make a lot of power for that size of stuffage. im JW cause i want a spare motor battery and controller for when i feel the erge to randomly build something! Sooooo thanks!, Colin.

[rctestflight]

@knifeedge63 blue wonder, 460mah 3s, 15amp esc

[BrotherBloat]

that's awesome - love the idea :]

[Mopar32985]

wow man that thing actually flew really good gotta love Delta wings

[bibiricat]

is this a good plane for a beginner ?

[rctestflight]

@bibiricat it is for a beginner to build but not to fly

[backintack]

hah that was skill at 4:15.  nice VTO BTW

[jauchiu]

I bet you could make that monkey fly. He already did a loop.

[flyby8906]

Hey nice job your good with foam!

[shaneeeeak]

gotta add a couple minutes for rebuilds, no? lol

[442paul]

what is that sn called?

thnx.

amzing plane for a sub 20 min build

[frogs84ss]

lmfao. dude you never stop amazing me. good job. keep it up. im 33 and hope to fly as good as you some day.

[brotherlybrother11]

w0w dude your talented i swear!!!

thats just amazng that everything you build ,flies

[TheLipRipp3r]

Right on, D! ...that's the best flying hurry-up-and-build-it plane I've seen! lol Great flying, btw.

[w7mag]

This is destined to be a classic RC video...

Nice!

[MrNerfmod]

was that made frum the pink foam frum home deepo? that i cant find!

[rctestflight]

@MrNerfmod ya

[dingo7222]

Any plans or dimensions? And is that Fan Fold Foam or Blue Core?

I want to build one lol I will time me and see how bad you beat me lol

[rctestflight]

@dingo7222 i dident use plans, its .5" insulation foam

[dingo7222]

@rctestflight Whats the wingspan/ length? It would really save me alot of guess work (and foam) Looks like it flys really good

[rctestflight]

@dingo7222 legnth 20 ws 28

[dingo7222]

@rctestflight Sweet, thank you so much

[marcoso94]

Awesome vid  as usual.

[impaler514]

Pretty cool dude. Takes me forever, but I am only on my second plane using rcpowers instructions. I couldn't believe how stable that little guy was. Cool beans man. Love all your vids! Keep em comin!