Added: 1 month ago
From: allboutandroids
Views: 5,773
Sort by time | Sort by thread (beta)

Link to this comment:

Share to:

All Comments (103)

Sign In or Sign Up now to post a comment!
  • i have a question i tried to install the firmware and it failed the installation and now my phone wont turn on properly it goes to the htc boot logo then it turns off and turns back on never completing the boot i tried a full wipe and a restore a few time still have the same problem any way i could fix it ? thank you

  • @filaadhd14 Hey! This issue has been caused because the Firmware file must have been uncompletely downloaded or incomplete. What I suggest you to do is to connect the SD card somehow, redownload the P58IMG, connect the SD card again, go to Bootloader to install the new Firmware. Once it's done, there is a chance it still won't boot so simply wait for 15min then turn off the phone. Then reconnect the SD card to delete the Firmware image. Once you have finished that, place the SD card again...

  • @filaadhd14 Then go back to Bootloader mode and choose recovery. Do a Full Wipe of Cache, Dalvik and Factory Reset. Install the ROM from ZIP and DONE! This should set you up. I really hope this helped!

    Feel free to subscribe for more content :D

  • Hey thanks for your help my phone works now, i flashed Virtuous Quattro before and it didn´t work ... Do you know the differences between Inquisiton and Quattro ?

  • @Xx7inNxX That's great! As for the differences, Quattro is build from scratch Source Code from Google, so completely AOSP also this project is on hiatus. As for Inquisition, it is a ROM that has been stripped off of Sense. ATM, it has removed all Sense parts except the Flashlight and Camera since those are better. So definitely, Inquisition is the one to choose.

    Feel free to subscribe for more content!

  • @allboutandroids thanks for all :)

  • Many thanks! Worked first time around with no issues at all.

  • @lawoiguy Haha, glad we could help :D

    Feel free to subscribe for more content!

  • Thankyou soo much. ICS running real nice on my sensation.

  • @hugoxDify Awesome, glad we could help :D

  • im trying to update my firmware but it can not find it under hboot/whitescreen

  • @Depu85 Hey! Sorry for the late response! As for the Firmware, once it is placed inside of the root of the SD Card and once boot into Bootloader mode, the firmware is automatically detected and VOL UP is used to install. If it does not happen that way, then make sure the file you downloaded is not corrupted and also that the name is P58IMG.zip and not another name. :)

    Feel free to subscribe for more content!

  • I really need help here is there any way i can install ICS with Windows XP. my HBoot is 1.23.xxxx with S-Off

    CID T-MOB01

    MID PG581000

  • @ELi2190 Really sorry for the late response! But as of now, the only HTC drivers available are for Windows 7 64bit only! As soon as there is a newer method or more options to be able to install the ROM we will update the description :)

  • @ELi2190 your hboot , shouldnt b 1.23.0000 it should b 1.08.0000 or a 06

  • Can somebody help me!? I did exactly what this video did, and the ROM starts up, but it isn't 2 seconds and I get continues message's saying "Unfortunately, the process com.android.phone has stopped". IT NEVER ENDS! Please help me, thanks!!

  • @nolanklunder I ALSO get the message "Unfortunely, com.android.acore has stopped." What does this mean?!

  • @nolanklunder Hey there! So, if everything was followed and you are still getting errors, that means that there is only one issue...The files you downloaded were corrupted somehow and was not 100% bug free. So please re-download the ROM and Firmware and repeat the Flashing process. SuperCID is permanent and therefore you would not need to do that. Hope this helps and also feel free to subscribe :D

  • @allboutandroids Yup, it was a corrupted download and I re-downloaded and re-did everything and it works! Thanks!

  • Just got a Sensation yesterday.

    Guess I'll wait until they release the official update tho.

    I tend to have terrible luck whenever I'm tweaking expensive electronics =/.

  • @iEnjoid Haha, well, when I just got my phone...literally the first day...I got a Boot loop and then the following week I bricked my phone! It is scary but it is worth it.

    Remember, you are bound to make mistakes as we are human after all. The Official ICS port will be at the END of Quarter 3 this year...quite a while still. However if you muster the courage, it will work as long as EVERY SINGLE step is followed...to the letter :D

  • @iEnjoid

    You will need to ROOT first and then this guide can be followed! Also feel free to subscribe for more content :D

  • @iEnjoid Yeah, I'll wait too. I have the worst luck when trying to do shit like this lol. Great that HTC has announced that ICS will roll out in the beginning of March.

  • THANNKKKUUUUU SOOOO MUCHHH!!!!!!

  • @qwaniphonefreak It's our pleasure :)

  • can you made a new video to the firmware update 3xxx

  • @SheYzOnE Hey! Could you please clarify to tell us what do you mean by "Firmware update 3xxx?"

    In this tutorial we showed how to flash the Firmware which is the one needed for an ICS based ROM being 3.24.401.1. I am not too sure what else would you like us to show.

  • Hi i think this is a great video thanks a lot for making it!

    I do have one question though... i noticed u were already running an ICS ROM, so when u rebooted after the firmware update it did not cause any problems. However, I am coming from a gingerbread ROM, so when I try and reboot with the new firmware surely this is going to cause issues?

    Is there an option after applying the new firmware to go straight back to recovery? or do I need to do a battery pull and go into bootloader?

    Thanks a lot

  • @fredcorp66 Hey! That's a great question! The thing is, to get to the original ICS ROM from a Gingerbread ROM, all you have to do is follow the same instructions and everything will work perfectly fine. The issue is that the new Firmware, doesn't sit too well with GB so whenever you want to go back, you'll need to flash the previous Firmware.

  • @fredcorp66 Part 2: As for the question of entering Bootloader after flashing, you can boot into your ROM, it will be laggy though, delete the Firmware, and reboot into Bootloader to go to recovery and then Wipe Data, Cache and Dalvik and you will be able to run a very close to perfect Ice Cream Sandwich ROM.

  • @allboutandroids Ok brilliant thanks a lot!

    So rebooting into the gingerbread ROM after the firmware update will not cause a bootloop or anything like that?

  • @fredcorp66 Technically...NO :)

    However, if it does freeze at the boot screen, give it about 15min to ensure that the new Firmware has been flashed. After that, pull out the battery, connect your SD card to your PC, delete the firmware, reconnect everything and then go to Bootloader > Recovery to install the ICS ROM.

    Hope this helped! Feel free to subscribe for more content :D

  • I noticed you had reddit open :)

    Great job on the tut.

  • @iEnjoid Thanks fellow Redditor :D

  • So i pretty much can't do an ICS ROM if I don't have Win7 64Bit?

  • @Kwongster94 Sorry man! :(

    The adb tools are only available for the 64-Bit Windows...at the moment BUT as soon as some other options are available, I'll keep the description updated!

  • I feel so sad = = .... I should have read the threat or tube before i flash my HTC sensation.

    I did the E-off and Cockwork recovery. than flash the custom ROM [insertcoins] with fail. On the web, there has no info regarding to must do with CID.......... therefore, I just skip it. ==

    I need some advise on restoring my phone~!

    can anyone help here?

  • @lee2028 I'll send you a message!

  • I got the updated cwm but still the same thing how do i check the firmware?

  • @joshbane1 Oh, I forgot to mention! To check your Firmware, enter Bootloader Mode and it will state the current one that you have installed :)

  • i get stuck at the white htc screen as well what do i need to do i can see when it is in hboot that the firmware was updated to 1.23

  • @TheJrhighhero Hey! The Firmware that needs to be installed is 3.24.401.1. If your Firmware is 1.23 then the flashing process was not properly done. Download the appropriate Firmware, place it in your SD Card's ROOT and then enter Bootloader Mode (PWR and Vol DOWN), it will then automatically detect it and press Vol UP to flash the new Firmware. Hope this helped! Don't forget to subscribe for more content :)

  • hey after i did the firmware upgrade, and when i go to choose install from sd card, it begins to install the rom, it says Formatting System as EXT4. E: Error in /sdcard/Insertcoin_ICS_RC1_4.4­.4.zip (status 1) Installation aborted.

  • @BetterDayz19 Hey! I'll send you a message!

  • @BetterDayz19 It seems you have contact lock so I will post the message here in parts:

    So let's begin. First things first, I need to know what steps did you take. Did you have a ROOTED HTC Sensation? Were you able to grant SuperCID, were you successfully able to Flash the Firmware? Did you delete the Firmware BEFORE going to Bootloader > Recovery to install the ROM? Did you do a Full Wipe of Data, Cache and Dalvik?

  • @allboutandroids

    Those are the questions. Please respond to them and IF you have done all of those actions and the flashing of the ROM did not work, then the reasoning is pretty simple. The ROM file that you have downloaded is either corrupted or Missing Data.

    I once downloaded a ROM at 86.3MB, installed it and it bricked my phone. Took me a couple of hours to finally realize that the actual ROM size was 86.6MB...so ALWAYS double check to see if you have the completed files.

  • @allboutandroids

    Hope this helped! If not, we can troubleshoot this together.

    Oh, also don't forget to Subscribe :)

  • @allboutandroids I installed SebastionFM's overclocked kernel and now there is sleep lag. when I press the sleep button to put the phone to sleep it takes a second to lag. how can i fix this?

  • @allboutandroids hey I got it, I had to format it after wiping and factory reset. thanks man your video really helped me out

  • @BetterDayz19 Great! I'm pleased that the video was able to help :)

    Thanks for Subscribing!

  • hi which one will you recommend between ARHD and InsertCoin, which has the least amount of crashes/issues? (For ICS only)

  • Comment removed

  • @iTandpasta Awesome! Thanks a bunch, we really appreciate it! We'll try to get more content every week :D

  • So I redownloaded the update firmware on my desktop this time instead of on my laptop. And BAM it worked. So I'm taking something is wrong with my laptop. But thanks for the help.

  • @diablokendall1 Haha, that's great! Perhaps the file you downloaded on your Laptop was missing some Bytes. I actually bricked my phone because my ROM was 86.3MB when it should have been 86.6MB! Anyway, thanks for the sub, glad we could help :)

  • Comment removed

  • the firmware will not load. any suggestions??

  • @diablokendall1 Hey! Make sure that you downloaded the appropriate Firmware for the ROM you chose. Next make sure that the name of the Firmware is PG58IMG.zip and lastly make sure that you placed it in the ROOT of your SD card that is the first view when you open it up on the PC. Boot into Bootloader Mode (PWR and VOL DOWN), and then it will automatically detect the Firware and Vol UP will install it. Hope this helped!

    Don't forget to subscribe :)

  • Comment removed

  • thanks alot man u really helped me out :D

  • @Jonl10191 No Problem :D

    Thanks for the Subscription!

  • thank you very much this finally resolve my problem

  • @55afrothunder You're Welcome :D

  • okay so can u post a diffrent link to the drivers now since the dumb goverment has shut down megaupload

  • @55afrothunder Heya! I have just posted the new link for the drivers!

    Don't forget to subscribe for more content :D

  • i have a 32 bit and the 64 drivers wont work for me it says no driers found what do i do??

  • @richardandnanny Hey! Have your installed the "ADB drivers"? You can only do this with ADB drivers, the normal HTC one will not able you to do this. You should download the file, and then go to device manager, look under USB for Unknown Device OR Android Device, and then browse for the drivers you just downloaded. Also don't forget your phone should be in Charge Only mode as well as Debugging has to be check on.

    Hope this helped, and don't forget to subscribe :)

  • @allboutandroids thank you soooo much i just finished and the rom is amazing keep making vids :)

  • @richardandnanny Haha that's great! Thanks for Subscribing and also, we will definitely make more videos!

    We had some trouble today...so nothing tonight BUT tomorrow, we'll have 3 vids!

  • is there anyway to install supercid with out a computer

  • @Casanova050393 I'm sorry no. At the moment the only method involves a PC using the Android Debug Bridge, ADB. As soon as a newer method comes out, we'll make sure to get a new video out on how to do it :)

  • MASHALLAH GREAT VIDEO FANTASTIC EXPLANATION. WITHOUT U THERE IS A HIGH CHANCE I WOULD HAVE A VERY EXPENSIVE PAPER WEIGHT

  • Comment removed

  • Comment removed

  • @melo15813 Take a chill pill dude no1 blocked multiupload your just trippin

    

  • Comment removed

  • Comment removed

  • will am i be able to go back any rom i had backed up before?

  • @arandajeanluc Yes however you will need to return to the previous Firmware to make it become stable :D

    Don't forget to subscribe for more content!

  • @allboutandroids oh so then i'll wait until there is a stock update from the htc update from the phone, i have too much saved stuff on it that i dont want to lose. I hope it would come in a month or so ")

  • @arandajeanluc Exactly! You could also do a Titanium Backup of your apps but it won't be able to save you messages and other stuff, but for app data it's great :)

  • @allboutandroids i have a GREAT IDEA FOR YOUR NEXT VIDEO! I've unlocked my phone for free by just doing some tweaks :) message me for the link, message because you can get more views if nobody knows it except you and me

  • I LOVE YOU THANKS A LOT OF!<3

  • @SheYzOnE Haha thanks for the compliment ;)

    Don't forget to subscribe :D

  • is there an easier way....

  • @miguel042022 I'm sorry, like we mentioned, Installing ICS is more technical and there is no other way around it unless you wait for the official update getting released in Q2 of 2012 :)

  • i Honestly have to say the fact that you take your time to respond to your viewers questions quickly is amazing.Thanks for the great tutorial an keep up the good work.best regards

    greenapplesca

  • @GreenApplesCA Haha, thanks for the kind words. We really appreciate it :D

  • I also seem to be stuck on the white htc screen, is it supposed to take a while?

  • @japazilian I'll send you a message.

  • clean your lens ;)

  • @saint3x6 haha sure. I actually used my LG G2x, to film my buddy's HTC Sensation :D

  • dude, thank u sp much for the help! the rom is awesome! it just keeps saying error when i try to download apps from the market.

  • @asher6ix No problem. Glad I could help you out. Anyways, I had the Market issue with Android Revolution 6.0.2. I did the following, not too sure if it's the proper fix though. So I went to Applications, Force Closed, Cleared Data and Cache. Also while the phone was on, I pulled out the battery making it do a Hard Cold Boot. Put the battery back in, booted up and it worked...But I'm not too sure what caused the problem!

  • after i updated the firmware (8:49) my phone is stuck at the white htc screen. help please!

  • @asher6ix I sent you a message :)

  • im stuck on the boot screen after flash

  • @bkdeadlysin I'll send you a message!

  • Thanks a Lot man .. Easy to follow steps... Also thanks for answering my questions and posting this video

  • @brother6ixx No Problem! We're here to help!

    Actually Thank YOU for subscribing and liking our videos :D

  • I give you huge THANKS! I dont know how much reading ive been doing, ill admit i didnt understand the step by step tutorial. After coming across your video and how to im on 4.0.3 with supercid!! thank you and keep up the awesome work!!

Loading...
Alert icon
0 / 00Unsaved Playlist Return to active list
    1. Your queue is empty. Add videos to your queue using this button:
      or sign in to load a different list.
    Loading...Loading...Saving...
    • Clear all videos from this list
    • Learn more