mark VII lincoln

[kpz1234]

Sounds great nice job.

[shadow35537]

damn thats tight the best one iv seen so far

[cutenukkah]

i have never like fords but this is one sexy sexy car good job man keep it up

[MRshreder01]

hey i have a 89 lsc.... where can i get performance parts such as exhaust heads, intakes for it? thnks.....i would love to get some flowmasters for it.

[V8ERMANN]

i like the cobra wheels on it, never heard a mark VII with an e303 before though its kinda confusing! lol

[dtpchilli4life]

It's so loud.. Which is awesome.

[82maxim]

good lookin car, just got done buildin a 347 blown to set down in my 91 special edition, keep up the good work!!!

[cobrafreak93]

do u think those cobra's will fit on my mark 8?

[s2000ron]

nice Mark i got one same but 1988 all original did u still have it or you sold it if sold how much you got for it

[beer210]

i got the 1992 mark vii lsc Special edition, black on black, black honeycomb rims, black paint, black leather interior, its got the 5.0 HO, factory long tube headers, sounds sweet, got a mean roar, but nutthing like yours

[fuscuse999]

nice looking car man i got one same in white with blue hard top i just bought new mufflers what did you put in to get that sound?

[coffeepothrlmk7]

i put in about $3,000 into the motor to get that sound.mostly a e-303 ford cam.

[kingvic97]

3 grand? what did you do to it?

[coffeepothrlmk7]

complete rebuild and machine work to the motor.heads were replaced w/performance ones,basicly a lot of my own money and time.

[coverdale20]

@coffeepothrlmk7 The cam is too lopey at idle for my taste, but Goddamn it's sexy taking off.... Nice work...!!!

[94STANG562]

nice lookin mark

[ffgew22]

Nice Mark VII BB edition. I have the same car. 1990 Bill Blass edition in white hehe. Lookin for some sweet rims and exhaust - was thinking about some Magnaflows. Any suggestions??

[Herb138]

Sweet Mark VII man, I love these cars. I finally bought one of my own a few months ago. Very Nice!!

[suprbird]

what mods are you runnin? i want my idle to be like that.

[coffeepothrlmk7]

mass air convertion and e-303 cam,cobra intake,gt-40 heads

[Evilliboba]

@coffeepothrlmk7

Are you running an A9L computer for the MAF conversion?

[Dizzles]

sits nicely on those cobra wheels.

[Falcain]

I recently picked one of these up and fell in love with it. It needs LOTS of help bc the previous owner neglected it, so I see lots of trips to the junkyard for parts to this classic.

[markVIIchick]

You and me both, my mark's interior looks like a mad cougar was let loose in it. Outside-wise the car looks fantastic.

[xxd9939]

I knew that had a cam. Absolutely beautiful, by the way.

[biker4life500xc]

i love your exhaust...i have a 88 and a 89....they are "sleepers" but they can haul ass

[atina36]

geweldig om te horen!!!

gr Anita uit nederland

[coffeepothrlmk7]

english please.

[atina36]

nicely sounded!! my English is very badly sorry.

[coffeepothrlmk7]

thanks.

[javiet212]

I got a 1990 Mark VII bone stock with 130,000miles on it runs like new maintance was always done on time. I have a really heavy subwoofer box in the trunk what would you suggest i do so i wont feel the weight?

[coffeepothrlmk7]

take the sub box out and sell it,then with the money you get put it into the gear set for the rear end and a stall converter.

[javiet212]

damn beautiful sound how did you get it to sound like that?? whats under the hood?

[coffeepothrlmk7]

about 3 grand in motor work.306 with a e-303 cam.

[luvscats69]

Looks and sounds great! Makes me miss mine!

[matt03beasty]

man that thing sure is a beauty well i got a 92 and im gettin a set of tint what percent is that :?

[Ptowniac69]

Ive got a 92 bill blass just like that but green. 60xxx org miles. Not rust or rot at all. have a mass air conv. f cam, 351w heads, cobra intake,3:73s, tci trans and a few other things. Car ran a 13.4 at the track. still turns heads all day when i drive it.

[coffeepothrlmk7]

not all 5.0 parts will fit,but most for the motor will.

[dje1973]

Did you have to change the hubs to mount the Cobra wheels?

[coffeepothrlmk7]

the wheels swap over with no mods.

[dieselinveins]

Chris, you still got it? Still sounds mean. Tony

[coffeepothrlmk7]

no,my dumb ass sold it,but now i have a mark VIII.

[dieselinveins]

Well, that is screaming for a 6 speed and the whipple..

[dieselinveins]

The 6 speed comment was supposed to go with the rest of our comments, not at the top. Sorry.

[LJSJIUJITSU]

Very nice. That cam has to be E-303 or something similiar. What's your 1/4 time?

[coffeepothrlmk7]

yep,it's a e 303.1/4 mile was 14.5@ 92mph.

[revolutionday1]

LOVE the Cobra-wheels!!!

[clintd1]

Is that with a stock ECM, or did you need a tune to run that cam?

[coffeepothrlmk7]

not really stock,i had to change it over to a mass air set-up with a 88 mustang computer.

[Quetzalcoytl]

ill

[CHRIS454]

That thing sounds like its got some bad ass cams in it. I plan to do that when i get my mark 7 lsc

[SakoTGrimes]

Needs a BMW diesel.

[midniet]

got a question...would mustang headers fit on a mark vii cause i got one and i want an exhaust and headers for it but i cant find any headers for a mark vii...or do i have to make customs ones for it

[coffeepothrlmk7]

yes the mustang headers will fit,the h-pipe will if its the one for the automatic.the flow tubes will have to be extended if you use a mustang cat back.

[greatgaileena]

nice car what year is it

[coffeepothrlmk7]

1988 bill blass

[Billy53124]

how did this cost you i would love to do this to my 92 lincoln 302 is sounds great

[coffeepothrlmk7]

$3,000 in the motor alone,and i did all the labor.

[martin7691]

WOW! I love that sound. Proper 'old school' I must know your secret! LOL.

[coffeepothrlmk7]

It's all in the parts that you use and the combonation they are used in.

[martin7691]

Very impressive. I want that sound on my mark viii rather than the 'angry bee' sound associated with the tuned exhausts on the mod motors.

[JohnDoe61pct]

are those mustang rims from 96-98?

[coffeepothrlmk7]

94-97 cobra

[traxadron]

Man I miss my 7. Nice heads!!! Sound to kill for

[norseking]

What the... that can't be a stock cam... can it? I'm guessing a high lift or long duration? That's an insane idle!

[coffeepothrlmk7]

It's an e 303 ford cam with gt-40x heads.

[xestranged]

Man, sounds just like my old one... makes me miss it!

[pissaroundtoo]

ya what kind of pipes u got on that

[coffeepothrlmk7]

basicly a mustang cat back system slightly modified to fit.

[Gotstar2k6]

yo man sick ride i have the same one... but my windows dont work... let me knwo what i can do for cheap... and dose your have flowmasters?

[coffeepothrlmk7]

yep, flowbasterds with no cats.

[doctorsadvocategame]

its orgasmic