Tantal - Polish AK74 Parts Kit Review

[2k12productionz]

ppsh41 jest też Polskie!

[jrome1178]

I prefer the underfolders



[SuperRip7]

i never like the wire stock

[wojak100]

Ehhhh....

I would like to have an tantal, but it's illegal in my country :(

[TheSouthernGentleman]

@wojak100 Guess you could get a Mauser or A Mosin Nagant.

[TheAkm74u]

Very good video on this weapon i have been looking into getting one. and this video helped me out a lot the only thing i find bullshit is that you have to have american parts on it.  to me if someone is going to use it for killing you cant stop them from that by saying they have to have this and that on there the american parts don't have the spunk of the real thing plus i pretty sure you can get a full auto permit so whats the point other then to stall all of us.

[GunWebsites]

@TheAkm74u

there is no "full auto permit"

[theerik270]

just wondering besides the trigger parts are there any other parts that dont transfer to other AK-74 models?

[GunWebsites]

@theerik270

most of the Polish parts won't work with other countries rifles

[theerik270]

@GunWebsites thanks

[Luk81asz]

@GunWebsites Tantal isn't ak74, other countries bought license for ak74 Poland didn't. The gun wasnt iven able to use ak74 magazines at begining.

[Yfr28]

Actually, polish Tantal wz.88 and Beryl wz.96 are most unreliable ones out of AK family. I still like them tho. Tantal stock is more comfortable than people think.

[shinymarshtop2]

i like that beat up and used look in AKs

[darealpapac]

saiga ak74 or Polish Tantal 74 ?

[MrBradshaw47]

hey how r u ? well i recently brought a tantal n ran into a problem which i need a parts kit. where did u buy urs please give me full detailed info. thanks

[EquipaPatriot]

How easy are these to assemble if one only has simple tools, such as a hammer, pliers, and flathead and Philips screwdrivers? Can it be done with ease?

[GunWebsites]

@EquipaPatriot

no, what part of this vid made it sound like that? the parts where I said it was NOT easy to assemble?

[desighnedmilitent]

thats alottt of work..to much for me lol

[FFarmerCharlie]

could you make a livin off building these and sellin them at gun shows?

[GunWebsites]

@FFarmerCharlie

If you did that you would need to become a licensed manufacturer

You would also need to find all the parts and tools, learn the craft of building good guns, and achieve a reputation in the industry

After all that I guess you could

[Adi150DD]

that version is the older one cos the modern one are heve same mag as AK 74 that one is have AK 47 mag so that one is a early version

[GunWebsites]

@Adi150DD

metal vs. plastic ?

[BendoverBernanke]

While doing a screw build you do not have to take the front half of rifle apart. You must take it apart for a rivet build though.

[neolexington]

where did this kit come from?

[GunWebsites]

@neolexington

Poland

[neolexington]

@GunWebsites

I meant were did you purchase the kit.

[GunWebsites]

@neolexington

Arms of America in Flagstaff AZ

[neolexington]

@GunWebsites Thanks!!

[fireball676]

@MrBigmilk2003 haha no...thats normal, you are talkin lots of heat and debree that hits that piston, as long as it can create a good seal, its fine

[jered1321]

i need gun bluing to my ak do u know ware i cant get done

[Jrhoney]

There's a company called birchwood casey and they have a really good and easy to use gun bluing kit that has everything you need to do a good bluing job and they aren't super expensive. You can get them at places like Cabela's or some gun stores.

[jered1321]

@Jrhoney TY

[DDRakm]

Nice job with the parts kit review! You guys should consider doing a guide to building these kits.

[kalashnicough]

Your bayonet is not a "tantal" bayonet...the one on your rifle is a standard polish akm bayonet. I had one also had one for my "tantal" until I found a real "tantal" bayonet.

[GunWebsites]

please provide proof of that

[wolfgoblin]

@kalashnicough: Please post a video of that so called tantal bayonet.

[cokeman2423]

The Tantal is an all around quality weapon to own, cheap, fun, accurate, and a good gun to have in your Kalashnikov collection.

[mammoth321]

Question about the receiver for the Tantal or AK74 in general are they different than AK47 receiver beside from the places for the holes

[GunWebsites]

well the extra hole for the selector on the left side..no other AK has that

[9mmkahr]

dude.. i wouldn't worry about it. i think it's 9 american parts to be 922r compliant.. there could be springs, op rod, magazine, all sorts of things. i'm quite sure they did it right, though.

[GunWebsites]

it is not 9 parts.. I think you are confusing the 10 necessary US parts with the 5 needed on the AK series rifles

you are correct they 'did it right'

[evilelurker]

Question about 922r compliance. My Century Tantal has Tapco trigger group,marked US,but nothing else. Also have a Century M70ab2,no markings at all except SN and manufacturer on the receiver,and Zastava logo. Looks exactly like a home build. Obviously,Century had to be compliant,but how would I prove it if questioned? For that matter how could Century prove it? Seems like a lot of loopholes,have you heard of anyone running afoul of the law over this?

[GunWebsites]

Your Tantal is old with a Tapco Trigger (3 US parts, and a US made magazine (3 US parts)

They also prolly use a US made barrel (1 US part)

You only need 5 on an AK or 6 with muzzle device

Do they are good to go

Use US mags, or replace the Floorplate & follower on the Foreign made magazine bodies to 'look' more correct

The Yugo has similar US parts in it's design

Of course CAI can 'prove' they are doing it legit, they are one of it not the largest importer of AKs these days

[evilelurker]

Sorry,guess I wasn't clear with my question. Sure,Century is one of the biggest,which is my point. They probably have thousands of M70ab2's out there with no US markings on the parts,and hundreds of these guns on the used market. With no box and no receipt from Century,how can a third party buyer show their gun is compliant? The law doesn't require parts to be marked,and that points up the absurdity of it all. 922r is bullshit,unenforceable,so why bother?

[GunWebsites]

Well I believe our character is defined by what we do when no one is looking

[evilelurker]

Well,if that were true,I'd be a wack-off,LOL......Hey,wait a minute.....

[GunWebsites]

LOL

[koreanpeoples]

do you know if MA residents can buy guns in NH and bring them back to MA?

[GunWebsites]

no I don't but I assume the same federal laws over interstate firearms purchases apply to you as well as any weird local laws you might have

don't ask the internet, call a local store who WILL know, and then let us know what you found out

[blackquiver]

sick today and ill watch it latter....just taks to ling 4 it to load..looks like a noter good vid

[SHTFzombies]

a magazine also counts as 3 parts! if you want the authentic look just keep the mag and put an american spring and follower and its 2 parts!

[GunWebsites]

Almost correct, it's a US made floor plate (not spring) and follower, but yes two US parts that are not visible and fairly cheap

[BustaMonkey1234]

can u review a Belgium ak?

[GunWebsites]

no, Belgium never built their own AKs but how about a Bulgarian?

We already did a review of a Bulgarian parts kit

[CMLovejoy]

Have you heard anything about key holing on the 1x9 twist Tantal?

[GunWebsites]

no one I know has talked about that and the people I know would deff talk about stuff like that.. so I have to assume it isn't a universal thing

[vintgeblues]

nice video man, very informative. I went with a bulgarian 74 from atlantic firearms (blane is a dick), but i've always admired the tantal. Do you have any info on how accurate of a rifle the tantal is in comparison to the bulgarian? 5*

[GunWebsites]

no but I suspect there is little difference

[sharky0922]

nice video, old memories come back heh.. although i had AKMS version.

[aramaki23]

i think the best thing about the rifle is the ammo and how it is so affordable

[kildas]

I'm from Poland, know that gun got it when i was in millitary. You should check BERYL and mini-BERYL new version of these gun.

[GunWebsites]

I have shot some dealer samples of the BERYL but they are not transferable in the US

[SHTFzombies]

Hey man i want to start building guns what do you recomend is the easiest?

[lo2676]

AR15 man

[stealthyshooter]

Get some partkits...

[GunWebsites]

yes, ARs are a hundred times easier to put together

[SHTFzombies]

what do you think about the difficulty in building a FN FAL?

[GunWebsites]

from what I've been told they go together easier than an AK, but I've never assembled one

[Monkymonkykli]

Nice video guys i really liked this video. Due to the fact i am a AK fan

[TheIclandicViking]

first

[Monkymonkykli]

No body cares Viking.