Jato With Underglow

[loadthebowl]

That is fuckin gangster!

[TheConan74]

nice jato dude

[spiroslouis1]

If you are electronic(like me) 3 leds is 4 mins work. If you are engineer(like me again) this car is horrible slow.(no powerfull). Also very nice video!

[omgwtfbbqgtfo]

you should build a ramp for it man!

[bearwinky]

light emitting device. LED. tiny little light bulb seperate battery pretty easy guys

[perraslocas]

@bearwinky

Its Light Emittin Diode

[supertmaxx1]

looks like chritmas

[dsydlosky]

where did u get them from

[flowrida13579]

where did u put the lights, where did u get them, how much were they??

[TxBowhunts]

yeah and how much did that LED cost

[traxxas91296]

I liked it when it didnt have the song

[cftigerz]

What song?

[anoneim]

what are you using, and how are you making the light turned on while you still have the reciever and transmitter on...

and where have u placed the light on the car ?

[FanandCheese]

its called neon. not underglow.

[Fight2Survive]

its the same thing

[iscareuiknowit]

No actually, neon is an element. Its used in cars for lights underneath the chassis and other things like store signs. The actual light itself can be called underglow, but thats more off a brand, but its like saying kleenex, its a brand, but we all know what you're talking about. If this guy were to say he has neon on his car he would be incorrect because it actually LED's, neon is the type of light. So they're not the same thing.

[ATVRider6840]

where and how did u mount the underglow

[winered1234]

not to shaby

[ktmorange08]

sweet

[tc3sean]

lmfao it looks like a fucking UFO when it gets off the ground

[raymondmarch123]

I am thinking about doing this on my revo

[skinnydipping05]

thats sweet how did u do that with the neon? btw sweet song wats it called?

[TheAirsoftbeast22]

how did you put the underglow on the car

[MauricioGomezPino]

Doesnt the leds break when you jump and the chasis hits the floor?!?

[DragRacing2009]

yes

[MauricioGomezPino]

So what if i want to pimp my jato with UnderGlow, and all of that stuff, but i also use my jato for racing, and jamping?!?!

[maglyf]

how many leds you put the Jato? and that measured 3.5 or 10 mm? and the cable together? help me broo

[ndawsome]

that must wake the neighbors up

[theobean100]

beastly dude! where can i get those?

[ThEJaIMsTa92]

Hey do you think you could post a DIY video?

[multikyd01]

thats kewl

[speedave00]

I was expecting this viedo to be retarted..............but i gotta tell you, that looks bad ass dude. I really like that

[1999151]

dude how much do you ask for modding them

[bradderzandcheese]

woah thts cool wot kit and wer from

[KIRON127]

dude thats amazing traxxas should make kits to put that on all of there cars!!! =)

[AlWheelin]

Yah, awesome, I just put LED's on my Slash so I good drive it at night and know which end is front or back at a long distance even street lights aren't bright enough! good job!

[kotsios1234567]

you should only use green leds!

[skmsym]

that is r/c cool! awsome to look at.

[indijar1]

is that 4 wheel steering

[banzuke94]

no only the front wheels steer

[pucky11]

bitch thats called doing doughnuts ho shut your mouth when you talk

[thecoolman101]

they should put it in one of those nextel commercals!

[NightFlyyer]

Very cool. 5 stars.

[Vulcnalia]

Now that is sick!!!!! its so beast

[samington59]

dude thats sick

[Cruzinon22s]

Awesome best one on you tube!!! 5 Stars!!!!

[350quadrider]

hey how good is that on gas

[AtomicProductions]

The setup was about $20 and required soldering the components together to how I wanted them.

[drapersk801]

where cou;d i buy this?

[solitudesoldiers]

It looks so awesome when it spins.

[revotmaxx8]

it's a christmas jato lol

[camaroboy2895]

thats awesome dude im gettin a jato 3.3 were should i buy neon like where did you

[PlainWhiteTs4Lyfe]

tahts sick, neon?

[jamiekenta]

damn, thats awsome.

[jaminadams]

thats awesome how much was the light setup?

[adajrdad]

sweet

[kaceywells]

F*&^ING AWESOME!!!

[RAVAGERrules]

That looks sweet, I bet the reciver pack dont last long.

[AtomicProductions]

It has a seperate battery pack for the lights.

[RAVAGERrules]

OH. well then that does kick butt, Kudos for creativity.

[neo3nfsmw]

coolest jato i ever seen!!!!

[GamersLife]

Awsome, love the vid, i may do somtin cool to my Jato 2.5

[envision1979]

that is just plain bad ass looking. i love it

[Soothsayerman]

Nice truck, nice lights, nice vid, nice toons.

[hedget593]

i had some for my t-maxx but the bulbs eventually broke when i was jumping, thats sick though

[lightningfish]

that is really cool man... i wanted 2 no if traxxas sells headlamps for the jato or do u have 2 make it yourself

[AtomicProductions]

You have to make them yourself, as far as I know.

[gbkcmowing]

You can buy them online for about 30 bucks some have working Brake/Running Lights

[gbkcmowing]

You can buy them online for about 30 bucks some have working Brake/Running Lights

[littlman284]

NICE!!!

[Gockssonn]

Need For Speed Whit RC that would be cool

[itptires]

so pimp!!!

[JatoRacr]

tight man, i was working on something like this for my jato but more for headlights so i can better tell which way the car is facing in the dark when its too far away to see clearly. can we get a price check for this project?

[AtomicProductions]

4, 1 watt LEDs at $5 each.

Etchant solution, $5 for 16oz.

Copper PC Board, $5

Battery harness, $1

Battery case, $1

Around $35 if you have a soldering gun.

[skamatt23]

52 seconds...DISCO BALL!

[BrockGill]

cool it looks like a spaceship when its up in the air!!! but how did you put the underglow on?

[bathgates]

thets pretty sick bro i need my jato to do that shit!

[NitroCaya]

wont it break if you jump itnice uder glow

[roachonius]

thats cool, its like a hippie light show lol

[jajayaboy]

why dont you figure out how he

did it yourself, all it takes is a light and wiring.

[MoNziL]

cool

[carboy66]

thats tight how did u do that?

[sgrateful]

please share how you did lights

[karlgluck]

awesome video Ryan! I'd love to see how you put together the underglow...

[lukinhas2]

wtf

[DemShopBoys]

were did u get it

[jatoboy1]

hey i got a questin but idk if u know but i got a jato just like urs but not the lights and i need a glow plug for it i havent drove it in like 3 monts but idk if mine got broken but if u push yours while its not on and the brakes dont work is that normal or did the brakes break on mine the thing i am wondering is if you push it and you press the break trigger will the breaks work or does it got to be on anny 1 help

[rcracer228]

try setting your brakes or check the throttle trim on your remote

[quader29]

That is sweet I wan't to get one.

[edgar42o]

thats thight man

[Summerride]

Light effect is soooo cool !!

[GTRPower29]

sweet

[radchad84]

nice video, nice ass car, prolly one of the best jatos ive seen

[gianrich]

thats a nice neon where did you get it

[ratgreen]

were did u put the battery for that im scared that if i do it they might overheat andblowup or somin??

[AtomicProductions]

For the Jato 3.3 I put the battery case in the middle of the car under the EZ-start motor. There is an empty conpartment, just remove the lid and there is extra space under it.

[Empire932]

you can make any car do wheelies with the right gear ratio/waight placement/ and engine i have a nitro sport se cant get it to lift the two front tires of a half an inch.its stock

[Sansa456]

its really nice with underglow!

[butmunch69]

thanks atomic

[butmunch69]

Someone please answer me this: Can a stock nitro sport (the new one) do wheelies without going in reverse first? I know its random.

PLEASE ANSWAR!!!

[AtomicProductions]

I don't know anything about the Nitro Sport but when looking on google, people say it can do wheelies.

[son8god8damn]

where did u get the lights?

[AtomicProductions]

sparkfundotcom Under the components section.

[son8god8damn]

ok thanks i found some on varad dot com

[butmunch69]

duuuuuuuude...

[ShOrTaY6]

I got a Jato and I'm planning on basically doing the same thing...

I got 3 Questions...

1. What power supply did you run the LED's off?

2. Did you cut holes in the body to make the Red lights come out like that?

3. How did you mount the LED's?

Thanks

[AtomicProductions]

1. 2AA battery source

2. I did not cut holes in the body.

3.Cut holes in the chasis to shine the LED's through.

[jayman5002002]

wall mart car section license plate screw led for headlights then get cig lighter stick lights couple inches long hook up to power sourc like 9 v then get alarm clock 9 v batt conector wire all together oh ya switch toturn on off i did to my rusty elec will be puting on sonly i just watched video to mine looks similar but differnt though i don t know if he's using same matereails but will give exeact effect go wallmart for led lights stick leds varous colors

[supercereal098]

that is cool how did you get it to stay under the car

[Carking93]

that is sick. how u do that. nice music to. i need that for my s maxx

[traxxas99]

ok sweet cant wait

[traxxas99]

Ok sweet looking forward to seeing how to make the underglow video i may put one on my nitro sport

[AtomicProductions]

Alright cool. I actualy am working on the video, just give me time. I am trying to make it as understandable as possible.

[traxxas99]

that is pretty cool man but more ppl prefer to drive in daylight and u would have to keep your car clean and the glow will prob break after a while

[AtomicProductions]

That is what I am dealing with now. Some wire is lose and needs re sodered but the bottom screws are stripped out.

[Synic08]

i love the big spot it leaves in the air, its just sick man, sick. Thumbs up!

[tksmither]

thats sick man cant wait to get a jato

[matvraket]

thats awesome

[hotbruno101]

awesome rc car i love the jato it's just so good and the neon that u put on it looks even better i just wish i could get one of those...........

[Tsak12m]

Hey man I have the same JATO but I can't find any underglow where did you get that at cause I would like to put some on mine

[AtomicProductions]

I now have my camera back and will be making a video on how to create the underglow.

[fabulous1xoxoxo]

Would it be pssible to put under glow on my revo 3.3?

[AtomicProductions]

Yes it would be possible. The lights are custom made and holes are drilled in the chasis for the placement of the LED's. The Revo probably has more room to put batteries and wiring.

[fabulous1xoxoxo]

How did u make them??

[AtomicProductions]

I am working on the How to video now and will let you know when it is done.

[fabulous1xoxoxo]

Thanx, My email is revo335'at'aim'.'com

[thnewest]

Great idea on the lights bud,.....you'd be amazed at how just a bit more tweekin' on yer ride will bring it up ta par...it's not quite hittin' that 'sweet note'....reguardless of octane, it should sound crisper, that's all. Hey, if ya put a 4 by 8 piece o' plywood down on the side of your cement platform,(to take that lip outta the equation) that thing will fly a friggin' mile!!Blip the throttle max right on take-off ta keep the nose up....good luck, c-ya

[AtomicProductions]

Thanks man. Watch the video titled 20ft. High Night Jump and theres you mile jump with plywood.

[Teknakill]

That was pretty sweet! Low flying UFO!

[hxcrcbashing]

nice video, look at mine.

[200141430]

hey man how did u hold the leds on the chassis with glue or tape?

[AtomicProductions]

My monitor went out. I just got it back and will be working on the underglow video. It should be up in the next couple of days.

[raegankatelynn]

pretty cool man

[jrwoodfeild]

gah ima pimp my savage when i get it ima do the underlight wheely bar green shocks dark blue and black top with light swich installed in back trailer

[666sphinx666]

sweet, i got mine to work, cuz i had it totaled a few days ago, and instead of dat many LEDs i got just a couple white ones in the front, and i think it looks pretty neat, but im workin on the underglow ones, where exactly did u drill the holes for the green ones

[666sphinx666]

dude, that shit is awsome, im workin on mine rite now, i have a jato 3.3 too, its gonna b sik, but i have a question, how many LEDs did u use and how do u control the on/off

[AtomicProductions]

I used 2 green 1 watt LED's and 1 red 1 watt LED. The wires are directly wired to the battery pack which is run by 2 AA. I store the batteries under the EZ start were the box compartment is.

[maveric2089]

I love it

[Dpistol1]

that shit is lovely!!

[AtomicProductions]

I know, 2 of my other college buddies got one also.  I sharpied the wheels to tell which car was mine at a distance.

[AtomicProductions]

But if you have a Jato, the sharpie will always look good (the car goes to fast to tell.).

[mattbty]

did u paint the body yourself?and nice song

[AtomicProductions]

I did not paint the body. I did sharpie the suspension and wheels red though.

[MyTube1338]

Pretty cool. :)

[Revmaster420]

Cool how you do that?

[jvs8864]

i think thats sick.... jatos are like lightning

nice job!!

[jerzydevil123456]

guys..come on..its a fucking toy car

[anniehimself]

You wanna tell Tebo, Hara, Kanai, or Drake that?

[rusty1219]

man thats some good shit

[NYTRODOOD]

do you have pink led`s on your jato?

[NYTRODOOD]

How did you get those pink LED's to come out like that? Where did you get those AWESOME LED's? thanks

[NYTRODOOD]

srry my bro got on and asked basically the same question earlier.dont wanna be buggin ya thanks

[NYTRODOOD]

this thing is awesome

[AtomicProductions]

We ordered L.E.Ds from internet, drilled holes for them and wired them. All for about $25. The 1 Watt L.E.Ds are $5 each.

[LouieGee06]

can u tell me the site please i am gonna purchase some thanks..

[AtomicProductions]

sparkfun, the LEDs are under the Components section.

[kamikaze916]

thats hella tight where can i get some of that?

[AtomicProductions]

Thank you. Please keep the comments coming.

[grazz83]

thats awsome man!!!