@12lali1992 AEX San Diego still have a few genuine G&P WOCs but not in this configuration, you might want to contact the Santa Clara office to see if they have any left.
Have u had any issues with your magnifier flipping back up into place? For instance if you were running, holding your rifle sideways, or making sharp movements?
A few questions: I'm lokking to mount a Madbull/SOCOM Gear DD RIS II to my G&P WOC and I was wondering what style delta ring I will need to do so and if mounting to rail will work. Could you PM me a link? Also, What length barrel are you using in the vid? I'm planning to have the 12" DD RIS II with an Iron Airsoft 12" Larue barrel. Think it will work? Thanks for the help!
@Doctorchops About 700$ in parts after the base gun though I sold of most of the items. Gas Blowback rifles mimic most of their real world counterparts in functionality. The hammer strikes a release valve rather than push forward a firing pin. The BCG carries the airsoft "nozzle" (bolt) to fire the projectile then diverts gas to cycle the action.
What do the anti rotation pins actually do? im thinking of getting one when i buy the g&p woc challenge kit and want to know if they actually enhance the performance.
@leviathan556 Did you have to buy a different buffer tube to get the PTS UBR to fit, or did the stock buffer tube work? sorry if I missed a video where you stated that you replaced the buffer tube.
@MasterOfCQB The UBR stock comes with it's own buffer tube that the upper guide rail is installed onto. If you use a G&P receiver purchase the PTS version, if you use a milspec lower like Prime/Inokatsu/WE you will have to purchase the real UBR.
g&p is offering a 'challenge kit' for $200 on evike. it has the same punisher receiver. but the stock is a standard mle stock. and it has regular hand guards. it sounds so cheap but of course, you have to build the entire gun yourself. how hard was it for you to build this gun? i'm definitely a beginner. the most i do with my guns is open them up to clean and relube. would you recommend a challenge kit for a beginner like me? or would i just screw things up and waste my money?
@mentalmetal1 You will need to have advanced knowledge of GBBRs and do some machining. Some guy came to AEX who bought one and could not assemble. I came in and assembled it in 4 hours and required fine tuning to shoot. It ended up costing more than the price of assembled gun after cost of parts and labor to get it working. I would not recommend WOC-X since they are potmetal lower parts. If you want a cheap gun, mind as well get a WE-Tech, otherwise go G&P Original, Prime, or Inokatsu.
@leviathan556 okay, so you recommend to me if I want to get a fine out-of-the-box working GBBR I should get the WE not the G&P Challenge kit? :D coz I really like the G&P M4 but I can't afford it and I am bit of a gearhead.. but I really can't change so many parts of the challenge kit..
@misomalu yes with the default barrel nut, just remember to remove the pin that blocks the gas tube port and keep in mind the rails are weaver spec and not Mil 1913.
Hey quick question! What Nozzle and carrier do you reccomend? I run PC duster with china made full steel internals. I bought the aluminum Ra Tech nozzle, but it hasnt come in yet. I'm wondering what would be the most reliable build for PC duster and not green gas. My Agm eats nozzles and carriers like no tomorrow.
@homeboyteddyisaliar if you are running on just HFC134a I recommend using a 6061 Aluminum carrier weighing in about 90-120 grams. The Airsoft Surgeon one is what I would use but 5KU and RA-Tech should suffice.
@DoinYooMum Zero in BUIS to desired range, zero the optic to co-witness with sight. Re zero optic only on the field to desired range. Check co-witness again.
How much money do you have invested in that? Because I have a Noveske N4 light basic 14.5" (real Ar-15) and I love Noveske. I'm just curious because I would love to build a gas airsoft rifle but I have no idea how much it would cost..
@TheFountainhead69 I no longer have this particular build, I mentioned before the total cost of doing a few builds approached the cost of the Noveske N4 light from Rainier Arms. You can purchase a reliable gun for 300-900$ depending on type and manufacturer. If you want Noveske, you can purchase the Prime Noveske N4 receivers for 500$ and prime lower parts kit for 200$ and build up to a rifle that may exceed 1K$. Recommend you visit GasGuns.Info and find/learn the options that best suits you.
Nice gun. I can never understand why people say "why don't you use real guns"?. Every American soldier knows and understands that firing a live firearm at a person is never a good thing. Life is precious, airsoft for fun, leave the real steel in the cabinet.
@leviathan556 LMAO! You run around in the woods playing army shooting each other with fake guns, Wearing Real uniforms and patches that you didn't earn WE! who WORKED hard to wear them think its a disgrace. Why don't you just buy a real gun and do something better with you talent and real gear!
@UStacticalmedic36 if you don't understand the fundamentals of the sport then you're wasting everyone's time with your ignorance. All the points in your misconstrued ranting is addressed in the comment history. You've gotten to smarten up before you can start using Youtube. You're done here.
@KalashnikovKid762 It's hard to convince your friends to go out in the woods and shoot each other with real guns... Unless you're Dick Cheney. I wish YT could sort the airsoft from the real stuff in the suggestions, because I'm not into airsoft, but I get the appeal. I won't bash 'em.
@leviathan556 You sound almost disappointed that you switched from Magpul sights to Troy. Troys are about the best there is. MBUS are just ok for the price. Nice rig, though. I bet it cost more than my real rifle.
@drewdane40 Not at all, I do like the Troy BUIS better than the Magpul MBUS. My only thing is I'm used to the A2 style adjustments on the rear sight which the Troy lacks but that's fine. The cost probably approached but not exceed the cost of your rifle. But then again you probably haven't dropped a registered auto sear in your lower whereas mine doesn't have to have one registered :)
@dereck100 but you still can't shoot your friends with it. The whole point of airsoft is to have fun. How fun would it be to shoot your friends with a real weapon..
@RiCoHeTMcQuEeN both are easy to install, the anti rotation pins should be installed with some blue loctite as the recoil will eventually back the screws out.
GOD DAMNIT you really shouldn't drop those mags on the ground like that.... it could really mess those things up... unless you have so many that you don't give a shit... lol.
i love these vids. it shows a lot of cool upgrades you can do. i was wondering what bad lever you used. i can only fin bad levers for a different brand gbbr. and where did you find the magnification mount that rotates over? van you provide links please
@Drumdudeck It's the PTS BAD lever that comes with entire bolt stop assembly. You can use a real one but it requires angling as WA bolt stops are not pinned into the lower. The Bomber swivel mount is from Airsoft Global.
So this is an airsoft gun then? At first I saw internals and I was like "is this a real AR-15 or an airsoft? OH wow it is a real gun!" but then I saw you shoot I was like "Oh must be a gas gun." Sorry for my ignorance. I'm unfamiliar with GBB airsoft guns.
@arandomperson3 gas in mag technologies are less than 5 years old so it's expected for people to not be familiar with them. There were a few things that do tip it off that this isn't a real AR-15 in this video, if you look closely enough. Cheers.
Very sharp looking set up! Those mags are pretty tough, I'd be worried about damaging them if I had to drop it. I pretty much just collect airsoft guns and don't play but I do shoot real AR-15s regularly. I've hesitated using AEG to do my drills at home cause I don't want to inadvertenly develope bad habits with my real rifle. Seeing these GBB M4s seems like the best way to go for in home drills.
@cmzangetsu1993 Real KNS, or similar, anti-rotation pins prevent the hammer and trigger pins from turning during operation. In GBBRs the movement is a larger problem as the tolerance of weaker hammer and trigger springs is very low and the pins will start backing themselves out of the receiver. I frequently had to push them back in, now I just run real KNS pins in both my lowers.
would you recommend this or the Socom Gear M4/ Magpul / STAG that is on Redwolfairsoft? I'm not sure which one to buy. This would be my first GBBR btw
@TheOnlyEliteSniper Hey mate I bought the Socom Gear M4 from Redwolf, and the bolt-rubber section of the bolt snapped off within 500 rounds. I've heard that the bolt is actually zinc alloy (pot metal), too bad this was only after I spent $350 on the damn thing. I'd go with the G&P GBB M4's, I've only had a positive experience with G&P.
@guywhoeatsjello wow, thanks for that post dude, you would have saved many people from the killing spree i would have committed when that part would snap. Yea im getting the WOC-X version and replacing some parts that are aluminum with steel. Hell of a lot cheaper, but still effective nonetheless. Thanks man you saved me a lot of pain!
@guywhoeatsjello Socom Gear (VFC rebrand) is actually not bad, but the internals are soft pot metal so they will break down quickly. G&P WOCs also come with pot metal bolt carriers but there are steel carriers available. What I recommend for you is to buy 3 VFC bolt carriers and other spare lower parts. Replace when necessary as things start wearing down.
@putinniu Once you remove the pin blocking in the gas tube and you purchase a properly threaded barrel nut, you can install it on a real AR-15. It should be already however you'll have heat issues quickly. A few people have installed Airsoft Rails on AR15s and had overhead issues after about 60 rounds. If you over heat, you run the risk of deformity quickly. I recommend just getting real rails if you're going to do serious shooting.
@GunsandRoses760 I investigated and I found that I'm mistaken. It's Milspec diameter, I tested with my Milspec ACS and CTR stocks. However, they are NOT milspec threaded so they will not thread into Inokatsu, Prime, Iron Airsoft, or real lowers.
@GunsandRoses760 it's Zinc/Alu alloy, it will eventually wear out in the bolt stop area, you will need to refile it for bolt stop to function. This will happen around 5-10K rounds, depending on mag catches.
@leviathan556 Did you have to buy a loading nozzle spring set or install those parts from your previous loading nozzle into your negative pressure nozzle?
@GunsandRoses760 the inokatsu bolt is longer than WA/G&P bodies, its make for the inokatsu real size bodies or prime bodies. it is real dimension unlike wa/G&P which are slightly smaller.
@HammerheadWOC That's the bolt found in the inokatsu full rifle, but the one sold seperatly is slightly different. First of all, it doesn't have the removable weight, and possibly a removable spacer to allow it to fit G&P/WA bodies, hence my question.
@leviathan556 Thank you so much for your help. I am halfway finished with a G&P WOC build, and am also going to be starting a Prime build later on. Will we see your "Project Midori" Prime build anytime in a video? I also sent you a PM on the gasguns forum regarding your use of a RS Vltor upper, and If you would be so kind to reply to that, I would appreciate it very much. Thanks!
@xlL0NGxSh0TzZ from Hong Kong and my local store, they generally range from 40-120$ depending on what you get. Leaks are always a possibility with any gas gun, you have to keep up with maintenance and willingness to fix them when needed.
what is your flashlight and mount called?
eyanvenom 2 weeks ago
@eyanvenom it was a G2 replica on a CAA mount.
leviathan556 2 weeks ago
I liked it when you had the m203 and the 552 (or 551 can't really remember)
This has a little too much
But it's not my gun so I really don't have any say
DriftDuramax 2 weeks ago
Wat rails r u using?
greasermonkey96lv 3 weeks ago
does AEX STILL SELLING THESE GUN ?
12lali1992 3 weeks ago
@12lali1992 AEX San Diego still have a few genuine G&P WOCs but not in this configuration, you might want to contact the Santa Clara office to see if they have any left.
leviathan556 3 weeks ago
nice reflexes XD
S34Ninc 1 month ago
mhm nicest airsoft ive seen on here
chrissteezybezzy 1 month ago
This has been flagged as spam show
Have u had any issues with your magnifier flipping back up into place? For instance if you were running, holding your rifle sideways, or making sharp movements?
eyanvenom 1 month ago
forgot the plastic bayonet
jesse10x 1 month ago
Haha mall ninja!
Scott14147 2 months ago
A few questions: I'm lokking to mount a Madbull/SOCOM Gear DD RIS II to my G&P WOC and I was wondering what style delta ring I will need to do so and if mounting to rail will work. Could you PM me a link? Also, What length barrel are you using in the vid? I'm planning to have the 12" DD RIS II with an Iron Airsoft 12" Larue barrel. Think it will work? Thanks for the help!
FluffyBoy32 2 months ago
Another misleading video where I can't tell if it's a real rifle or airsoft toy. Who buys parts from ehobby asia for a real rifle?
shortround63 2 months ago
@shortround63 Like you can't tell what g&p woc meant? you stupid retard.
24Rorschach 2 months ago
Thanks
AirsofGeekNdMiguel68 2 months ago
Juss One Question where do yu get all your parts from?
AirsofGeekNdMiguel68 2 months ago
@AirsofGeekNdMiguel68 Overseas: Ehobbyasia, Redwolf Airsoft, Airsoft Global, EBAirsoft. Stateside: AEX, Evike, Rainier Arms, Bravo Company Manufacturing USA, USCAV, Brownells, Midway USA.
leviathan556 2 months ago
@leviathan556 ok cool thx for the help and keep up the good work
MrXtremereviews 2 months ago
@Leviathan556 what are your internal upgrades because I noticed your gun had great recoil.
MrXtremereviews 2 months ago
@MrXtremereviews At the time of this video, it was all stock with the exception of 12.5" inner barrel and G&P NPS nozzle.
leviathan556 2 months ago
@leviathan556 Did the Noveske KX3 make the sound more fearing or was it not really noticeable?
KagaKiyomitsu 3 months ago
@KagaKiyomitsu The muzzle report can be detected a littler farther down range, that's about it.
leviathan556 3 months ago
Awesome video I lol every time you drop a 70$ mag like its a hot potato lol your nuts dude
JohnJayRambo1 3 months ago
did yhis gub hold up well
godismyhomie101 3 months ago
I'm actually considering tackling a similar build with 10.5'' noveske rails instead. Is yours still holding up pretty well?
Kirifuda7 3 months ago
@Kirifuda7 sold it long time ago.
leviathan556 3 months ago
Every time you drop a mag I cringe
M4DPWN3R 4 months ago
@M4DPWN3R no magazines were harmed in the making of this video.
leviathan556 4 months ago
do most of the gbb M4 mags from different companies work on different gbb M4s?
iedhunter44 4 months ago
I love your set up, it is a dream set up. But you should put in the Inokatsu super bolt for this, it will be even more fun :)
jserna23 5 months ago
How much did this setup cost you?
(When you said "BAD lever" I got pretty damned confused haha. Still not sure why airsoft toys have BCGs and hammers lol)
Doctorchops 5 months ago
@Doctorchops About 700$ in parts after the base gun though I sold of most of the items. Gas Blowback rifles mimic most of their real world counterparts in functionality. The hammer strikes a release valve rather than push forward a firing pin. The BCG carries the airsoft "nozzle" (bolt) to fire the projectile then diverts gas to cycle the action.
leviathan556 5 months ago
is air soft or what
MrFrogg46 5 months ago
Hoooooleeeeee shiiiiiiiiit...
That's a nice gun. A bit over the top on accessories, but THAT'S A NICE GUN.
Tendrop711 5 months ago
oh i guess you did put a kx3 noveske on it
(p.s. i woulda kept the m203 just to make it more lethal lookin
dito2942 6 months ago
Comment removed
dito2942 6 months ago
This has been flagged as spam show
Like this comment if you think he should make an update of his rifle :)
BlitzedMan 6 months ago
were nice
ale7777x 6 months ago
What do the anti rotation pins actually do? im thinking of getting one when i buy the g&p woc challenge kit and want to know if they actually enhance the performance.
TrentonJamesWollman 6 months ago
@TrentonJamesWollman Google helps. They prevent the pins from backing out.
leviathan556 6 months ago
@leviathan556 Did you have to buy a different buffer tube to get the PTS UBR to fit, or did the stock buffer tube work? sorry if I missed a video where you stated that you replaced the buffer tube.
MasterOfCQB 7 months ago
@MasterOfCQB The UBR stock comes with it's own buffer tube that the upper guide rail is installed onto. If you use a G&P receiver purchase the PTS version, if you use a milspec lower like Prime/Inokatsu/WE you will have to purchase the real UBR.
leviathan556 7 months ago
@leviathan556 ah that makes more sense. So the G&P is not milspec? At all? Or is it just the lower while the hand guard is mil spec?
MasterOfCQB 7 months ago
g&p is offering a 'challenge kit' for $200 on evike. it has the same punisher receiver. but the stock is a standard mle stock. and it has regular hand guards. it sounds so cheap but of course, you have to build the entire gun yourself. how hard was it for you to build this gun? i'm definitely a beginner. the most i do with my guns is open them up to clean and relube. would you recommend a challenge kit for a beginner like me? or would i just screw things up and waste my money?
mentalmetal1 7 months ago
@mentalmetal1 You will need to have advanced knowledge of GBBRs and do some machining. Some guy came to AEX who bought one and could not assemble. I came in and assembled it in 4 hours and required fine tuning to shoot. It ended up costing more than the price of assembled gun after cost of parts and labor to get it working. I would not recommend WOC-X since they are potmetal lower parts. If you want a cheap gun, mind as well get a WE-Tech, otherwise go G&P Original, Prime, or Inokatsu.
leviathan556 7 months ago
@leviathan556 okay, so you recommend to me if I want to get a fine out-of-the-box working GBBR I should get the WE not the G&P Challenge kit? :D coz I really like the G&P M4 but I can't afford it and I am bit of a gearhead.. but I really can't change so many parts of the challenge kit..
Sunshrine2 6 months ago
@Sunshrine2 Unless you know what you're doing, you best get a complete rifle.
leviathan556 6 months ago
2 lil comments:
1: nice as fucking shit gun!
2:(more of a question) why do asians get all the good guns!? i feel like im missing out on their fun.
MarineMike97 7 months ago
@MarineMike97 get a steady income, buy gun, use gun. Not rocket science.
leviathan556 7 months ago
@leviathan556 really? i live in canada and gun prices are literally double.
MarineMike97 7 months ago
Sweet GBB!
TheRBAirsoft 7 months ago
Will all madbull noveske rails fit a GBB M4 (mine is made by WE tech)
misomalu 7 months ago
@misomalu yes with the default barrel nut, just remember to remove the pin that blocks the gas tube port and keep in mind the rails are weaver spec and not Mil 1913.
leviathan556 7 months ago
It pains me to see you drop your 60$ mags into the ground
akaklol 7 months ago
@akaklol again, padding was used.
leviathan556 7 months ago
Fps?
tacobarnacho 8 months ago
@tacobarnacho 200-450 via NPAS.
leviathan556 8 months ago
You have more wizbang on yours than my real Noveske :)
pittwm 8 months ago
What is that scope thing that can be fliped up or down called?
airsoftkingdom12 8 months ago
How much did you pay for all that?
mustang8258 8 months ago
thats what I call a QD sight
boombap420 8 months ago
Hey quick question! What Nozzle and carrier do you reccomend? I run PC duster with china made full steel internals. I bought the aluminum Ra Tech nozzle, but it hasnt come in yet. I'm wondering what would be the most reliable build for PC duster and not green gas. My Agm eats nozzles and carriers like no tomorrow.
homeboyteddyisaliar 8 months ago
@homeboyteddyisaliar if you are running on just HFC134a I recommend using a 6061 Aluminum carrier weighing in about 90-120 grams. The Airsoft Surgeon one is what I would use but 5KU and RA-Tech should suffice.
leviathan556 8 months ago
do you sight in your optics or do take em out of the box and slap em on the rifle
DoinYooMum 8 months ago
@DoinYooMum Zero in BUIS to desired range, zero the optic to co-witness with sight. Re zero optic only on the field to desired range. Check co-witness again.
leviathan556 8 months ago
How much money do you have invested in that? Because I have a Noveske N4 light basic 14.5" (real Ar-15) and I love Noveske. I'm just curious because I would love to build a gas airsoft rifle but I have no idea how much it would cost..
TheFountainhead69 8 months ago
@TheFountainhead69 I no longer have this particular build, I mentioned before the total cost of doing a few builds approached the cost of the Noveske N4 light from Rainier Arms. You can purchase a reliable gun for 300-900$ depending on type and manufacturer. If you want Noveske, you can purchase the Prime Noveske N4 receivers for 500$ and prime lower parts kit for 200$ and build up to a rifle that may exceed 1K$. Recommend you visit GasGuns.Info and find/learn the options that best suits you.
leviathan556 8 months ago
Nice gun. I can never understand why people say "why don't you use real guns"?. Every American soldier knows and understands that firing a live firearm at a person is never a good thing. Life is precious, airsoft for fun, leave the real steel in the cabinet.
homeboyteddyisaliar 9 months ago
Hey guys stop hating, this gun is sexy and he did a very nice job building it!
Sam690100 9 months ago
Why dont you join the military if you wana play like a one!!!!! And with real guns
UStacticalmedic36 9 months ago
@UStacticalmedic36 We protect those who protect us, that's all I'll say about what I do.
leviathan556 9 months ago
@leviathan556 LMAO! You run around in the woods playing army shooting each other with fake guns, Wearing Real uniforms and patches that you didn't earn WE! who WORKED hard to wear them think its a disgrace. Why don't you just buy a real gun and do something better with you talent and real gear!
UStacticalmedic36 9 months ago
@UStacticalmedic36 if you don't understand the fundamentals of the sport then you're wasting everyone's time with your ignorance. All the points in your misconstrued ranting is addressed in the comment history. You've gotten to smarten up before you can start using Youtube. You're done here.
leviathan556 9 months ago
wait, thats an airsoft gun? I would've just gotten a real one instead.. but whatever floats your boat lol.
KalashnikovKid762 9 months ago
@KalashnikovKid762 It's hard to convince your friends to go out in the woods and shoot each other with real guns... Unless you're Dick Cheney. I wish YT could sort the airsoft from the real stuff in the suggestions, because I'm not into airsoft, but I get the appeal. I won't bash 'em.
@leviathan556 You sound almost disappointed that you switched from Magpul sights to Troy. Troys are about the best there is. MBUS are just ok for the price. Nice rig, though. I bet it cost more than my real rifle.
drewdane40 9 months ago
@drewdane40 Not at all, I do like the Troy BUIS better than the Magpul MBUS. My only thing is I'm used to the A2 style adjustments on the rear sight which the Troy lacks but that's fine. The cost probably approached but not exceed the cost of your rifle. But then again you probably haven't dropped a registered auto sear in your lower whereas mine doesn't have to have one registered :)
leviathan556 9 months ago
How did you install ur anti rotation pins. Can u tell it step by step on how u did?
DoinYooMum 10 months ago
@DoinYooMum read the instructions that they come with.
leviathan556 10 months ago
For all that stuff you could of bought a real gun
dereck100 11 months ago 11
@dereck100 but he didnt so too bad
0mgwtfbbq21 8 months ago
@dereck100 but can you go around shooting your friends - without going to jail??? no right?? fucking retard.
mentalmetal1 7 months ago
@mentalmetal1 one day you'll grow out of airsoft and understand how stupid pouring that much money into a toy gun really is.
sNpeR1080 7 months ago
@sNpeR1080 gee i hope not. shooting at people is fun. but you can only do it with a 'toy' gun. without going to jail.
mentalmetal1 7 months ago
@dereck100 You can't shoot people with a real gun. :)
jaredlee283 6 months ago
@dereck100 can he shoot his friends with a real gun????can heeeeeeeeee??can heeeeeeeeeeeeeeeeeeeeeeeeeee?????
FI2ozen 4 months ago
@dereck100 but you still can't shoot your friends with it. The whole point of airsoft is to have fun. How fun would it be to shoot your friends with a real weapon..
semperfi0202 2 months ago
@kakahieu12 well, he is called "Leviathan" haha. But yeah, that looks like a really heavy load out. Badass gun, though. How much did that all cost???
daretorun 11 months ago
COOL
jerrellvd28 11 months ago
Nice lol
airsoftnerfpeople21 11 months ago
@RiCoHeTMcQuEeN both are easy to install, the anti rotation pins should be installed with some blue loctite as the recoil will eventually back the screws out.
leviathan556 11 months ago
hey would you want to sell this gun
V360Ninja 1 year ago
@V360Ninja the G&P WOC no longer exists as is and was parted out for different projects, new videos coming soon.
leviathan556 1 year ago
Term is "Reciever" not "Body"
kevin11288 1 year ago
GOD DAMNIT you really shouldn't drop those mags on the ground like that.... it could really mess those things up... unless you have so many that you don't give a shit... lol.
hanjo1505 1 year ago
@hanjo1505 floor padding and camera trick always helps.
leviathan556 1 year ago 2
@leviathan556 doesn't sound like there's floor padding to me... lol.
hanjo1505 1 year ago
your rate of fire seems higher then normal; are there any mods on that? sorry if this a repeat but i did not watch the first review of your gbbr,
tod1188 1 year ago
@tod1188 G&P NPS nozzle, G&P standard carrier, G&P 40g buffer, Thin speed buffer pad.
leviathan556 1 year ago
for $200.00 you can take half the weight from the barrel,and handguard. 10.5 Short Barrel Rifle
Davidautofull 1 year ago
This has been flagged as spam show
you should get an afg by magpul
jrtorres101 1 year ago
you should get afg by magpul
jrtorres101 1 year ago
dude you should get a larue solar panel mounted on there to power up that laser gun you got
bordersoldier 1 year ago
Droppping WA mags on to the floor....nice!!
ForgedWerks 1 year ago
This is a very cool rifle but it seems so overdone. Try taking off the flashlight and PEQ and lighten the load a bit.
MP5er123 1 year ago
@MP5er123 the platform was about 7.8 lb, my 11.5" build is 8.4 lb with a heavy steel barrel.
leviathan556 1 year ago
whered you get the bad lever?
Drumdudeck 1 year ago
@Drumdudeck Redwolf
leviathan556 1 year ago
or are the ones for wa compatible?
Drumdudeck 1 year ago
i love these vids. it shows a lot of cool upgrades you can do. i was wondering what bad lever you used. i can only fin bad levers for a different brand gbbr. and where did you find the magnification mount that rotates over? van you provide links please
Drumdudeck 1 year ago
@Drumdudeck It's the PTS BAD lever that comes with entire bolt stop assembly. You can use a real one but it requires angling as WA bolt stops are not pinned into the lower. The Bomber swivel mount is from Airsoft Global.
leviathan556 1 year ago
Things changed ... gonna get a inokatsu 2009 :D
But it's only semi auto
Do you know an easy way to change the fireselector without disassembling the whole gun ?
MegaAbfuck 1 year ago
@MegaAbfuck You may need to reinstall the full auto sear if you take out the fire selector.
leviathan556 1 year ago
@leviathan556
ahh thanks ... I guess I'm goning to stick to this vid here ...
do you know if aftermarket parts for the wa system willl work as good as Inokatsu original ones?
MegaAbfuck 1 year ago
@leviathan556
Ahh ok...
what are you using to oil your gun ?? This is gonna be my first gbb (= And I don't wan't to break it ...
Just a little bit of airsoft-silicon oil onto the bolt carrier the 0-rings and the megazin valve? or anything special?
MegaAbfuck 1 year ago
I have a question about the laser engraved punisher emblem?? is there like a punisher sticker emblem you can buy from a website??
JolNeZz 1 year ago
So this is an airsoft gun then? At first I saw internals and I was like "is this a real AR-15 or an airsoft? OH wow it is a real gun!" but then I saw you shoot I was like "Oh must be a gas gun." Sorry for my ignorance. I'm unfamiliar with GBB airsoft guns.
arandomperson3 1 year ago
@arandomperson3 gas in mag technologies are less than 5 years old so it's expected for people to not be familiar with them. There were a few things that do tip it off that this isn't a real AR-15 in this video, if you look closely enough. Cheers.
leviathan556 1 year ago
I'm soon gonna get my G&P WOC m4a1 base gun ....
Can't afford a defender at once.
I think I'll get a dd 9inch ris ll for it ...
Does anyone know a gas block to fit under it ?
MegaAbfuck 1 year ago
@MegaAbfuck any low profile gas block will fit in most midlength rails.
leviathan556 1 year ago
@leviathan556
ahh ok ... im 16 and don't have that much money but an old aeg triangle foresight ... that's gonna be a nice gas block i think :D
MegaAbfuck 1 year ago
Very sharp looking set up! Those mags are pretty tough, I'd be worried about damaging them if I had to drop it. I pretty much just collect airsoft guns and don't play but I do shoot real AR-15s regularly. I've hesitated using AEG to do my drills at home cause I don't want to inadvertenly develope bad habits with my real rifle. Seeing these GBB M4s seems like the best way to go for in home drills.
CombatRZero 1 year ago
Uh, leviathan, i found a g&p woc gbb m4 on ehobbyasia. is there something different about it? should i get it?
AirsoftGunsAndBbGuns 1 year ago
i love ur vids man :) do u mind telling me where u bought your magnifier? the only ones i can find are the twist off ones
MoreButterMOREBUTTER 1 year ago
One quick question.
What is the purpose of the anti-rotation pin?
Im not familiar with the WA design.
cmzangetsu1993 1 year ago
@cmzangetsu1993 Real KNS, or similar, anti-rotation pins prevent the hammer and trigger pins from turning during operation. In GBBRs the movement is a larger problem as the tolerance of weaker hammer and trigger springs is very low and the pins will start backing themselves out of the receiver. I frequently had to push them back in, now I just run real KNS pins in both my lowers.
leviathan556 1 year ago
that sounds like the really steal version when he mounted the camera on the side facing him
hollycow123445 1 year ago
Wow..... So beautiful....
markman828 1 year ago
Are the mags your using ghk mags?
eleeschalow 1 year ago
@eleeschalow Some of those Mags were GHKs the others were G&P and WA original.
leviathan556 1 year ago
leviathan556 what ethnicity are you?
Chenipherc77 1 year ago
The reason is.....it just is, nice one leviathan556
Chenipherc77 1 year ago
@Chenipherc77 tautology is a beautiful thing
leviathan556 1 year ago
would you recommend this or the Socom Gear M4/ Magpul / STAG that is on Redwolfairsoft? I'm not sure which one to buy. This would be my first GBBR btw
TheOnlyEliteSniper 1 year ago
@TheOnlyEliteSniper You'll need to do your own research and find out what system would fit your needs best.
leviathan556 1 year ago
Comment removed
guywhoeatsjello 1 year ago
@TheOnlyEliteSniper Hey mate I bought the Socom Gear M4 from Redwolf, and the bolt-rubber section of the bolt snapped off within 500 rounds. I've heard that the bolt is actually zinc alloy (pot metal), too bad this was only after I spent $350 on the damn thing. I'd go with the G&P GBB M4's, I've only had a positive experience with G&P.
guywhoeatsjello 1 year ago
@guywhoeatsjello wow, thanks for that post dude, you would have saved many people from the killing spree i would have committed when that part would snap. Yea im getting the WOC-X version and replacing some parts that are aluminum with steel. Hell of a lot cheaper, but still effective nonetheless. Thanks man you saved me a lot of pain!
TheOnlyEliteSniper 1 year ago
@guywhoeatsjello Socom Gear (VFC rebrand) is actually not bad, but the internals are soft pot metal so they will break down quickly. G&P WOCs also come with pot metal bolt carriers but there are steel carriers available. What I recommend for you is to buy 3 VFC bolt carriers and other spare lower parts. Replace when necessary as things start wearing down.
leviathan556 1 year ago
You mean the Noveske airsoft rails will work on real gun???????
Is that too risky to get hurt?
putinniu 1 year ago
@putinniu Once you remove the pin blocking in the gas tube and you purchase a properly threaded barrel nut, you can install it on a real AR-15. It should be already however you'll have heat issues quickly. A few people have installed Airsoft Rails on AR15s and had overhead issues after about 60 rounds. If you over heat, you run the risk of deformity quickly. I recommend just getting real rails if you're going to do serious shooting.
leviathan556 1 year ago
I dont really care for m4's cuz their so plain. but you sir have disproved that on many levels. This is legit!
kale61 1 year ago
AHHHHHHHHHHHH
OH, you got me good, I didnt realize that this was airsoft until you snapped the bolt like a rubberband.
hardy har har har... :-|
rllang01 1 year ago
LOL u blink alot
CerealIsDaBomb 1 year ago
does this thing still operate good?
AirsoftGunsAndBbGuns 1 year ago
is commercial size only for aeg or not? or only for real gun? so mil spec can fit WA & G&P ?
xlL0NGxSh0TzZ 1 year ago
@xlL0NGxSh0TzZ AEGs are smaller than Milspec. Like I said G&P/WA are spec'ed for Milspec 1.15 inch.
leviathan556 1 year ago
@leviathan556 Didn't you say That G&P buffer tubes were commercial size?
GunsandRoses760 1 year ago
@GunsandRoses760 I investigated and I found that I'm mistaken. It's Milspec diameter, I tested with my Milspec ACS and CTR stocks. However, they are NOT milspec threaded so they will not thread into Inokatsu, Prime, Iron Airsoft, or real lowers.
leviathan556 1 year ago
@leviathan556 Also, How is that G&P Bolt Carrier? What do you think of it?
GunsandRoses760 1 year ago
@GunsandRoses760 it's Zinc/Alu alloy, it will eventually wear out in the bolt stop area, you will need to refile it for bolt stop to function. This will happen around 5-10K rounds, depending on mag catches.
leviathan556 1 year ago
@leviathan556 Does this also apply to the chrome bolt carrier?
GunsandRoses760 1 year ago
@GunsandRoses760 same deal, it's also pot metal just with electroplating.
leviathan556 1 year ago
@leviathan556 So you would recommend other bolt carriers by Prime?
GunsandRoses760 1 year ago
@GunsandRoses760 any Prime should be fine.
leviathan556 1 year ago
@leviathan556 Did you have to buy a loading nozzle spring set or install those parts from your previous loading nozzle into your negative pressure nozzle?
GunsandRoses760 1 year ago
@GunsandRoses760 I got spare parts for days, nozzle sets notwithstanding.
leviathan556 1 year ago
@leviathan556 Is a gas tube actually required, or is it purely cosmetic?
GunsandRoses760 1 year ago
@GunsandRoses760 Mostly cosmetic, but it helps align the gas block and the triangle sights if you have them.
leviathan556 1 year ago
@leviathan556 So The gas block isn't required if it isn't a a Triangle front sight?
GunsandRoses760 1 year ago
@leviathan556 DO you have any knowledge of the Inokatsu Super Bolt? Will it fit WA/G&P bodies?
GunsandRoses760 1 year ago
@GunsandRoses760 the inokatsu bolt is longer than WA/G&P bodies, its make for the inokatsu real size bodies or prime bodies. it is real dimension unlike wa/G&P which are slightly smaller.
HammerheadWOC 1 year ago
@HammerheadWOC That's the bolt found in the inokatsu full rifle, but the one sold seperatly is slightly different. First of all, it doesn't have the removable weight, and possibly a removable spacer to allow it to fit G&P/WA bodies, hence my question.
GunsandRoses760 1 year ago
@GunsandRoses760 as you stated, you can remove the spacer and drop it into to WA spec receivers without a problem.
leviathan556 1 year ago
@leviathan556 Thank you so much for your help. I am halfway finished with a G&P WOC build, and am also going to be starting a Prime build later on. Will we see your "Project Midori" Prime build anytime in a video? I also sent you a PM on the gasguns forum regarding your use of a RS Vltor upper, and If you would be so kind to reply to that, I would appreciate it very much. Thanks!
GunsandRoses760 1 year ago
@GunsandRoses760 I will make a video of my Prime soon, I just have to get around to do some filming.
leviathan556 1 year ago
is commercial size only for aeg or not? or only for real gun? so mil spec can fit WA or G&P ?
xlL0NGxSh0TzZ 1 year ago
could i fit a reall magpul stock on my WA? bcuz im planning to order it on the magpul stock so do i just order the milspec 1 and it will fit?
xlL0NGxSh0TzZ 1 year ago
@xlL0NGxSh0TzZ It's Milspec, my RS Magpul ACS fit just fine. Do not use Commercial Size.
leviathan556 1 year ago
does a AEG stock fits in a WA m4 gbb?
xlL0NGxSh0TzZ 1 year ago
@xlL0NGxSh0TzZ No, WA specs are true Milspec. AEG are a tad smaller, I know, I had to return a magpul pts aeg stock just for that fact.
leviathan556 1 year ago
were do u buy ur mags? and is it expensive? and does it leak ??
xlL0NGxSh0TzZ 1 year ago
@xlL0NGxSh0TzZ from Hong Kong and my local store, they generally range from 40-120$ depending on what you get. Leaks are always a possibility with any gas gun, you have to keep up with maintenance and willingness to fix them when needed.
leviathan556 1 year ago