Hey I live in flushing, queens, NY.. Are u guys in the tri-state region? If so can u please install some HIDs on my 2011 C300? I will pay for parts+labor.. I just don't trust the local mechanic with this..
do those aluminum housing ballast prevent Electromagnetic Interference from coming in contact with those sensitive Mercedes components are they better than those "slim digital" ones? How come you didn't drill them to ground? i have those "slim digital" ballast and caused my 05 c230 to go limp mode all because i had it to close to the ABS and suppose i didnt drilled them to the body of the car. Is that true?
@XmojotronX The ballast used in this video (Premium Slim) is a EMI shileded unit that will not disrupt the electronic components in your vehicle. These units do not need additional grounding to avoid interference with other systems because of the quality of their internal components. Keep in mind that not all ballasts are the same. XenonSupply Premium ballasts are EMI shielded, Waterproof, epoxy filled units with CANBus decoders.
Email us for more info at Help(at)XenonSupply(dot)com
@hangandrew You can use this same method for the 2001 C240 however the engine bay will be slightly smaller as it is a older year model. It does use the same bulb type and kit as the one showed in the 2007 C Class. I would recommend emailing our support department to get a direct product link for your 2001 C240 at Help(at)XenonSupply(dot)Com.
@lajka456 Your E55 has stock 4300K HID's and would look best with some 4300K fog light HID conversions to match. Send us an email at Help(at)XenonSupply(dot)com and we will be able to link you to the correct plug n play kit.
Im planning to do this on my e82 1 series and I'm just wondering if that rubber attachment on the outside to keep moisture off that's installed on the drilled dust cover comes with the kit, and should I come across errors?
@DoodleSquad The rubber grommet does come with every XenonSupply kit and is already attached to the wires for assembly. For kit recommendations send a message to Sales(at)XenonSupply(dot)com and provide your vehicle year make and model. You can also gives us a call at 1-800-840-3240 ext 1.
hi sorr for bothering you again jon here in dublin just watchn your video dose the ballast not need too be connected too the battery and is the nio need for a relay switch thanks a mil jon
@leonardhair The installation process is very similar for the E-Class but requires a special H7 clip to properpyl seat the HID bulb. We do supply the clip when you purchase a kit from XenonSupply. Just contact us at Sales(at)XenonSupply(dot)com for additional info.
Hi, Could you please clarify about the high beams? Do I need to adda seperate bulb or how does it work?
jothibasur 1 month ago
would i need a separate kit for high beam and low beam?
and is there a video that shows how to do the fog lights on the W204?
kHuNkHuNa10 2 months ago
Can you do a how to video for the fog lights on the c class??
AcuraGreek 2 months ago
didnt you need to add a error message cancellor?? the car will think it has a bulb out bc hid kit is 35 watt and factory non hid is 55 watt...
AcuraGreek 2 months ago
Is it necessary to unhook the battery?
Aranu 2 months ago in playlist Uploaded videos
Hey I live in flushing, queens, NY.. Are u guys in the tri-state region? If so can u please install some HIDs on my 2011 C300? I will pay for parts+labor.. I just don't trust the local mechanic with this..
acexd 2 months ago
thanks!!!!
ilnigno95 5 months ago
So only zip ties were used to mount the ballast?
St8Solja 5 months ago
do those aluminum housing ballast prevent Electromagnetic Interference from coming in contact with those sensitive Mercedes components are they better than those "slim digital" ones? How come you didn't drill them to ground? i have those "slim digital" ballast and caused my 05 c230 to go limp mode all because i had it to close to the ABS and suppose i didnt drilled them to the body of the car. Is that true?
XmojotronX 7 months ago
@XmojotronX The ballast used in this video (Premium Slim) is a EMI shileded unit that will not disrupt the electronic components in your vehicle. These units do not need additional grounding to avoid interference with other systems because of the quality of their internal components. Keep in mind that not all ballasts are the same. XenonSupply Premium ballasts are EMI shielded, Waterproof, epoxy filled units with CANBus decoders.
Email us for more info at Help(at)XenonSupply(dot)com
-XS Team
XenonSupply 7 months ago
One more thing, lets say the lights burn out after awhile, can you go back to stock lights? lol
hangandrew 7 months ago
@hangandrew Yes. These are plug n play kits that are completely reversible
XenonSupply 7 months ago
Hey, I was wondering, can you do this exact method with a 2001 c240? And what about the high beams? Thanks.
hangandrew 7 months ago
@hangandrew You can use this same method for the 2001 C240 however the engine bay will be slightly smaller as it is a older year model. It does use the same bulb type and kit as the one showed in the 2007 C Class. I would recommend emailing our support department to get a direct product link for your 2001 C240 at Help(at)XenonSupply(dot)Com.
Thank You
-XS Team
XenonSupply 7 months ago
hey im looking to match my fogs to my main hid lights on my 2003 e55, what do you suggest i do??? please help
lajka456 8 months ago
@lajka456 Your E55 has stock 4300K HID's and would look best with some 4300K fog light HID conversions to match. Send us an email at Help(at)XenonSupply(dot)com and we will be able to link you to the correct plug n play kit.
-XS Team
XenonSupply 8 months ago
Im planning to do this on my e82 1 series and I'm just wondering if that rubber attachment on the outside to keep moisture off that's installed on the drilled dust cover comes with the kit, and should I come across errors?
DoodleSquad 8 months ago
@DoodleSquad The rubber grommet does come with every XenonSupply kit and is already attached to the wires for assembly. For kit recommendations send a message to Sales(at)XenonSupply(dot)com and provide your vehicle year make and model. You can also gives us a call at 1-800-840-3240 ext 1.
Thank you,
-XS Team
XenonSupply 8 months ago
cooooooooooooooooooool! you made it look easy
XmojotronX 9 months ago
hi sorr for bothering you again jon here in dublin just watchn your video dose the ballast not need too be connected too the battery and is the nio need for a relay switch thanks a mil jon
leonardhair 10 months ago
hi can you fit these too a eclass 2003 do you need too conect too battery jon
leonardhair 10 months ago
@leonardhair The installation process is very similar for the E-Class but requires a special H7 clip to properpyl seat the HID bulb. We do supply the clip when you purchase a kit from XenonSupply. Just contact us at Sales(at)XenonSupply(dot)com for additional info.
Thank you,
-XS Team
XenonSupply 10 months ago