@1bUlLiT2010 Provided you keep the control unit in a relatively dry location, you're fine. Mine is tucked inside a full stock, moisture isn't really an issue.
@1bUlLiT2010 Thanks for the answer. Some times the weather doesn't help and it's good to know that it's safe. Going to order one soon then. Thanks again ;)
@booligan1985 Like in the video it looks like you pull the trigger and then it shoots it doesn't look simultaneous. Do you know what i mean? it might just be the vid.
@FILASIHIYproductions What you might be seeing is the fact that the gun doesn't start firing until the trigger is all the way at the rearmost position, due to the microswitch system. The motor still has to cycle, and I'm just using a stock motor with this gun for the demo, and with a higher torque motor, trigger response is even better.
but does it blend
AllButRandomness 1 month ago
@booligan1985 can you still play use the aeg with rain?
1bUlLiT2010 2 months ago
@1bUlLiT2010 Provided you keep the control unit in a relatively dry location, you're fine. Mine is tucked inside a full stock, moisture isn't really an issue.
booligan1985 2 months ago
@1bUlLiT2010 Thanks for the answer. Some times the weather doesn't help and it's good to know that it's safe. Going to order one soon then. Thanks again ;)
1bUlLiT2010 2 months ago
Can this fit in a SCAR? The SCAR has a version 2 gearbox.
codwodzarwarr 2 months ago
@codwodzarwarr I haven't fit one in a SCAR, but if it uses a standard V2 type trigger shuttle system, it should work.
booligan1985 2 months ago
It looks a little delayed.
FILASIHIYproductions 2 months ago
@FILASIHIYproductions How so? It has nearly instant trigger response, much faster than a normal AEG.
booligan1985 2 months ago
@booligan1985 Like in the video it looks like you pull the trigger and then it shoots it doesn't look simultaneous. Do you know what i mean? it might just be the vid.
FILASIHIYproductions 2 months ago
@FILASIHIYproductions What you might be seeing is the fact that the gun doesn't start firing until the trigger is all the way at the rearmost position, due to the microswitch system. The motor still has to cycle, and I'm just using a stock motor with this gun for the demo, and with a higher torque motor, trigger response is even better.
booligan1985 2 months ago
do you have to install that weird trigger spring with the trigger, or just the trigger itself?
chairsofter1911 3 months ago
@chairsofter1911 You still need the trigger spring to allow the trigger to return properly.
booligan1985 3 months ago
@screwintel I use an aws stealth fet with 11.1v batteries and it works fine.
harrisonpwnage 4 months ago
Very nice my friend!
;)
AlienProduce 4 months ago
why buy this rather than the aws scorpion?
ScrewIntel 4 months ago
@ScrewIntel I haven't tested the AWS Scorpion yet, so I can't draw any comparisons.
booligan1985 4 months ago
@ScrewIntel for some reason all aws fets seem to break when used with 11.1 lipos...
on my local forum there have been 7 users who brought the stealth aws fet and it broke because it was used with an 11.1
ScottiesVlog 4 months ago
@ScrewIntel aws scorpion is discontinued and the ascu is drop in. you have to solder the scorpion yourself
chairsofter1911 3 months ago