Don't sweat the haters that don't understand electricity. Real stun guns have limiters in them ... yours doesn't. Of course, if you want to get wild get a big capacitor from Radio Shack and some 9 volt batteries. Microwave ovens have mammoth capacitors in them, but you are skating on the deadly side ... but oh man ... what that would do to a thug!
Really shoulda put in the video that you need to not only take the battery out but DISCHARGE THE CAPACITOR when you take apart the camera (touch the 2 leads together with something metal). That's why everyone's getting shocked after they take out the battery, the capacitor still has a charge in it.
i put a smaller but FUCKIN STRONGER 2000uf cappacitor and i got a little 9v bat and fuck it shocked the FUCK out of me and my finger got a 3rd degree burn D:<
Haha! Nice. I made one with a lego casing around it. I put clear blocks over the flash and added a button using bionicle pieces to make it so u can also use the flash to scare people. Sounds lame, i know, but it works good.
@izaiah303 It is powered by a 330V capacitor, and it says all over the place that it won't kill or seriously injure a thing. Man the rocket scientists I get posting comments here are getting dumber.
@izaiah303 The capacitor is 330V, standard tasers are 50,000 volts. You could have a 10 billion volt taser and it will not kill a human. It goes by amperage.
K I made one but as I was putting it together I accidentally dropped a piece of fetal on the circuit board and the bulb exploded and temporarily blinded me it ALS fried the circuit board :P now it won't work
@Satansniper12 All cameras could be different, also the contact points can change the size of the spark. I happened to get the biggest spark with that particular screw driver and two screws. Play around with it..see what works best
After I watched this video, Ive already made 2 basic tasers. Those things are addicting. But I taped the battery onto one of them cuz it kept falling out and then the charging button got jammed in and kept charging the stun and it fell on the carpet and started sending sparks like outta control on my carpet and I had to stomp it out :( it was my favorite one; it had the strongest charge of the two and even had a little light to tell me when its done charging
@wasitrealy lol it scared the hell outta me at first. After I made mine, it was self-destructing and sparking, so i had to stomp it out :( Too bad, because it worked really well...
I have been working with HV circuits for a while now, and I can say that spending a few more bucks on an *extremely* simple flyback driver would produce some very electrifying results. Very. I do not agree that this project is dangerous, as the AA cell cannot deliver enough current. Nevertheless, it does hurt (duh).
@bored1980 If you really want to hurt an "attacker", removing the capacitor will increase the voltage and lower the amperage, as the charging circuit delivers 3x the voltage than the capacitor in order to charge it. Without the capacitors, there is no need to wait for it charging.
This made me remeber something, when i was 8 or 9 years old i removed the casing (or whatever you call it) of a disposable camera and shocked myself and friends for fun. can't remeber my hand going numb like you described though, maybe you get used to it after a while.
hahaha just took mine apart too. i'm not very bright apparently. i was fooling with the flash, listening to the charging noise before i took it apart. i then removed the battery without thinking twice.
Well, just got the crap shocked out of me. Twice. It seems the capacitor holds quite a charge!! lol
Your instrucktional videos are highly apreciated. today at school i brang it to show my friends, and one of them got into a fight with some other guy ( he was black ) i had it, tazed him, he swoar like crazy and backed off. Ah, the use of technology. So my thanks to you.
I was trying to find out if i could do something like this with a cvs camera and it shocked me and hurt but i could still use hand does that mean the kodaks have better effect? and could one of thoser kill or paralize for a day or 2
@airsoftnorway1 Please read the comments before you ask these questions. I've already answered this multiple times. Mine puts out ~330V. 9V battery may work but I don't guarantee anything
@airsoftnorway1 No you shouldn't use a 9V battery: the circuit, and especially the transformer, are built for an input of 1.5V. This means that increasing the input voltage to 9V will not increase the power of your stun gun, it will only burn the transformer and short your circuit.
so its normal for it to make that charged noise when you put the battery in and after you shock something? or should it not be making that noise after one shock and not pressing the button again? is it normal for the battery to be warm during this whole process? just wanted to know because i made one the other day and im concerned about these things. thank you.
@Twables89 All cameras are different, but the charged noise and the heat are normal. It is a short circuit, remember, so results will vary because you are using the camera against what it was built to do.
Nice video! A friend and I are making one out of a fugi-something camera. Doesn't come apart nicely like a kodak we just snaped all the plastic off and got the circut board. The capicitor is smaller then the one you have there but im sure it will still give off a nice shock. Pretty simple and cool to make for less then $10
I was fooling around with it and sparked it up a couple times, I cant get it to spark anymore, did I break the motherboard or something? Not sure if I should buy a new camera and be more careful
I touched the circuit board when the taser was charged by accident and it zapped me so bad that smoke case out. My finger hurt the rest of the evening.
@chunkyfunkymonkey28 still pretty interesting insights here. I think I may try a variant on your idea and pull the capacitors and daisy chain them somehow to stack the voltage.
k heres how make a ok one take the camera diposible open it take fil m out and then theres the circut board there 2 sotter points next to lens there should be a flassh copper pice push it down carfully and then touch sotter points and something alos if u take the flashh piece off the copper piece and put it on those sotters it will sond like a firecracker went off.
@leafinmilo You, sir, are wrong. The sound it makes is what it makes.
To all: Please stop flooding the video with comments trying to find some flaw or otherwise in the simple video I have posted. Get off Youtube and make one yourself so I can stop coming back here to post replies to smart assed people. Comments will be disabled if I need to k eep wasting my time with this, which wouldn't be fair to the people here posting questions.
there's another way where you can just cut a wire and it will shock. i made the mistake of cutting the wire with all metal scissors. the ones with metal grips. if you hold it in your hands and it shocks you, the shock travels up to your shoulders.
It would be awesome to charge it and rip off the cap. and put plastic on it til you need to use it and carry it around and charge it again by the circut board :D
The video clearly states that everything is at YOUR own risk. If you felt unsafe, you should have stopped the build. Or, you shouldn't have used it on a little kid. Sorry to hear about your problems, but there is nothing I can, or will, do about it, as per the disclaimer. I would appreciate if the comments to this story be kept to a minimum. Mike
This comment has received too many negative votesshow
Hey you dumb mother fucker!!! My lil brother got shocked by the tazer and is now in the hospital in critical condition. Ifucking hate you dont make any more videos that harm people. Please johnny need help.
dude no joke i have same circet board and when i de charged it so it wont shock me i used copper to discharge it now it wont work but the battery and one part of the cirqet board heats up plzz help
You probably shorted it out too much. Again, these circuits boards ARE not designed for this kind of application. Chances are, you might need a new one.
I screwed open a camera and touched the capacitor i think i got a shock fuck that hurted :O
timpos546 4 days ago
I use goldtoe socks too
3xtralife 1 week ago
Don't sweat the haters that don't understand electricity. Real stun guns have limiters in them ... yours doesn't. Of course, if you want to get wild get a big capacitor from Radio Shack and some 9 volt batteries. Microwave ovens have mammoth capacitors in them, but you are skating on the deadly side ... but oh man ... what that would do to a thug!
corax2012 2 weeks ago
im on a weird part of youtube again!
jessdarcy5611 1 month ago
TRIPOD!
cptexas1 1 month ago
i shocked the shit outta myself... it hurt like hell... just be careful
VanHalenFreak99 2 months ago
Why is there music?
DrFeelGoodxD 2 months ago
Really shoulda put in the video that you need to not only take the battery out but DISCHARGE THE CAPACITOR when you take apart the camera (touch the 2 leads together with something metal). That's why everyone's getting shocked after they take out the battery, the capacitor still has a charge in it.
tooocool49723 2 months ago
So have I shocked myself just now an I have 2 marks on my fingrt
24MrDiego 3 months ago
I have made one of these myself it works great....... heads up hurts like hell!!!!!:D
bman51296 3 months ago
lmfaoooo it hurts :p
p00ds 3 months ago
I have that same camera and idk what happend i forget which way the battery goes in and i tried both ways but the button isnt working
10wilsonm10 4 months ago
thumbs up if you moved back when it sparked
tyricthebest 4 months ago
i put a smaller but FUCKIN STRONGER 2000uf cappacitor and i got a little 9v bat and fuck it shocked the FUCK out of me and my finger got a 3rd degree burn D:<
MrFunyman1234 5 months ago
lol i made it and TOOK OUT THE BAT AND STILL SHOCKED THE SHIT OUT OF ME
MrFunyman1234 5 months ago
Nice video.
MojaveViper 5 months ago
I was trying to make this, I set off the shock while I was holding it, it hurts like a bitch and really numbs you hands
dmez33 6 months ago
same glue gun
SuperScruffypuppy 6 months ago
you can ask for a used camera for free at walmart sometimes
greatnate29 6 months ago
you can ask for a used camera for free at wallmart sometimes
greatnate29 6 months ago
mod it to use a 9 vold >:)
blingbloobla 6 months ago
@blingbloobla I believe that would just make the battery last longer. The capacitator is 330V.
MinecraftsMostEpic 5 months ago
@MinecraftsMostEpic ahhh i see your point is very valid. i didnt even think of that.
blingbloobla 4 months ago
Haha! Nice. I made one with a lego casing around it. I put clear blocks over the flash and added a button using bionicle pieces to make it so u can also use the flash to scare people. Sounds lame, i know, but it works good.
WZaDproductions 6 months ago
i know your pain it hurts like a bitch haha it burnt me :p
poiuytrewq95 6 months ago
i hooked this up to an old metal tennis raquet and made a bug zapper xD
tomalotube 6 months ago
could i hot glue the wires to the capaciter
TheBradem 7 months ago
you should try it befor saying it doesnt work ... learn befor saying your opinion
giocrew1 7 months ago
to both of you, its powered by 330V and not the AA, and no, it wont kill or hurt anything. you are making pointless arguments
chunkyfunkymonkey28 8 months ago 2
piece of shit a mouse wouldnt feel it AA battery haha get a better shock of the sockets lool
xiFALLz 8 months ago
the fucking taser is powered by a AA batterie it wonnt even kill a rabbit
izaiah303 8 months ago
@izaiah303 It is powered by a 330V capacitor, and it says all over the place that it won't kill or seriously injure a thing. Man the rocket scientists I get posting comments here are getting dumber.
chunkyfunkymonkey28 8 months ago 15
@izaiah303 The capacitor is 330V, standard tasers are 50,000 volts. You could have a 10 billion volt taser and it will not kill a human. It goes by amperage.
MinecraftsMostEpic 5 months ago
@izaiah303 You're planning on chasing down a fucking rabbit to tase it?? Get a hobby man.
yfzrider13 2 months ago 2
*metal
eyemadethis4you 8 months ago
K I made one but as I was putting it together I accidentally dropped a piece of fetal on the circuit board and the bulb exploded and temporarily blinded me it ALS fried the circuit board :P now it won't work
eyemadethis4you 8 months ago
dont make this fucking taser i almost got killed not exaderating......dont taze the fucking camera hurts like hell
grangerleber 9 months ago
@grangerleber It will not kill you or even come close to killing you...you are indeed exaggerating. A lot.
chunkyfunkymonkey28 9 months ago 11
ok i was just taking the mother board chip thing out and shocked th shit out of myself!!!!!!! BE VERY CAREFUL IT HURTS LIKE A BITCH!!!!!!!!!!!
TheBug47 9 months ago
LOL!!!! i dropped my 11 year old couzin... cause he broke my xbox controller lmao he also cryed.. like a little bitch :) thats what he gets
igunot129i 9 months ago
Hmmmm that isn't as impressive as knocking someone down. Maybe if you could link multiple capacitors it would be enough to knock someone down/out.
TheMasterTate 9 months ago
Comment removed
SirHoboTheSecond 10 months ago
@SirHoboTheSecond works on anything but you get the visible sparks with metal
chunkyfunkymonkey28 10 months ago
@SirHoboTheSecond skin is a conductor asshat.
DwainDuhwaine 2 months ago
@DwainDuhwaine Yeah fuck you too.
SirHoboTheSecond 2 months ago
why buy a camera you can just ask the people at the film devoloping counter for the dead camras and they will give you how ever many you want
BLGTSMITH 10 months ago
It does hurt like a bitch
Zaxhacks 10 months ago
8 people were shocked by a disposable camera taser
snippa1ps3 10 months ago
roflmao, u shld chnge ur name! itssounds like a mouthful!
deathempire70 10 months ago
Nice casing... Style, ish... But anyway i have made like 2 of them (with no case) and the spark was only 1/5 of the size of ur spark and wonder why?
Satansniper12 11 months ago
@Satansniper12 All cameras could be different, also the contact points can change the size of the spark. I happened to get the biggest spark with that particular screw driver and two screws. Play around with it..see what works best
chunkyfunkymonkey28 11 months ago
Hey how come when I was taking apart the camera, I took out the battery and I touched something and i still got shocked?
warlockmetal1 11 months ago
@warlockmetal1 because the capacitor will still be charged.
chunkyfunkymonkey28 11 months ago
@chunkyfunkymonkey28 ahh figures.
After I watched this video, Ive already made 2 basic tasers. Those things are addicting. But I taped the battery onto one of them cuz it kept falling out and then the charging button got jammed in and kept charging the stun and it fell on the carpet and started sending sparks like outta control on my carpet and I had to stomp it out :( it was my favorite one; it had the strongest charge of the two and even had a little light to tell me when its done charging
warlockmetal1 11 months ago
@warlockmetal1 Lol, I did the same...
wasitrealy 9 months ago
@wasitrealy lol it scared the hell outta me at first. After I made mine, it was self-destructing and sparking, so i had to stomp it out :( Too bad, because it worked really well...
warlockmetal1 9 months ago
lol i opend a old disposable camera (to make a viewfinder) and i shocked myself
MrPlaystationboy 11 months ago
anyone know if this is AC or DC current?
ridethegiantbuffalo 11 months ago
@ridethegiantbuffalo LLLLLLOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLL
didierlassus 11 months ago
@ridethegiantbuffalo its dc
xXLoVeRandHaTeRXx 10 months ago
I think I blew my capacitor, It won't work anymoar.
1ApertureRealist 11 months ago
could i get a bigger capacitor and swap it for the Kodak one? plus any ideas on a case to use that looks more like a stun gun and not a gun
GeorgeWGordon 11 months ago
I made this and shocked myself on accident like 3 times.
dragonbreathstinks 11 months ago
coool.
Egonaut209 1 year ago
dude i made one differently than urs and when i hold my charge down for 5sec. it dropped my freind
skyler10201 1 year ago
SO if someone jumped out at me and i shooked him would the guy back away ?
wowiliketolongoboard 1 year ago
@wowiliketolongoboard No, he'd probably think you have special needs and then would walk away. This isn't a weapon, it's a toy.
chunkyfunkymonkey28 1 year ago
wow. i accidently shocked myself and i cant feel my finger!!!! gr8 vid!!!!
weirdalnumber1fan 1 year ago
I have been working with HV circuits for a while now, and I can say that spending a few more bucks on an *extremely* simple flyback driver would produce some very electrifying results. Very. I do not agree that this project is dangerous, as the AA cell cannot deliver enough current. Nevertheless, it does hurt (duh).
Really professionally made video, though.
Keep up the good work!
digihawk159 1 year ago
What's the name of that song
460forlyfe 1 year ago
@460forlyfe Chord Memory by Daft Punk.
chunkyfunkymonkey28 1 year ago
When you shocked yourself, how much did it hurt? Would it be enough to make an attacker think twice?
bored1980 1 year ago
@bored1980 It really wasn't bad, I think the video makes it seem more dramatic than it really is (sorry). It's more of an annoyance, nothing serious.
chunkyfunkymonkey28 1 year ago
@bored1980 If you really want to hurt an "attacker", removing the capacitor will increase the voltage and lower the amperage, as the charging circuit delivers 3x the voltage than the capacitor in order to charge it. Without the capacitors, there is no need to wait for it charging.
sonconmas 1 year ago
This made me remeber something, when i was 8 or 9 years old i removed the casing (or whatever you call it) of a disposable camera and shocked myself and friends for fun. can't remeber my hand going numb like you described though, maybe you get used to it after a while.
OrangeWig 1 year ago
can i use a larger capacitor from a computer power supply? and maybe a 9 volt or D battery?
Gonthor1000 1 year ago
@Gonthor1000 not sure, you'd have to try yourself. Good luck.
chunkyfunkymonkey28 1 year ago
@Gonthor1000 the larger cap would NOT WORK NITHER WOULD THE 9V the D would work
laserindie 1 year ago
canu use the same principal but connect it to the flash cause i want to go to a dark place with my freinds and flsh it in there FACES!!!
cacneaunit6 1 year ago
fuck...i did this with my camera, i took the battery out and the damn thing still fucking shocked me!! it hurts!! lol
passwordguy1 1 year ago
@passwordguy1 When I ever touched the leads of the capacitor I only felt a tingle through my body
aaron45765 1 year ago
hahaha just took mine apart too. i'm not very bright apparently. i was fooling with the flash, listening to the charging noise before i took it apart. i then removed the battery without thinking twice.
Well, just got the crap shocked out of me. Twice. It seems the capacitor holds quite a charge!! lol
AtheistsAreGODS 1 year ago
i have mini aligator clamps will those work for the saulder???
respond as fast as possible if anyone can
dethlokpiggiez 1 year ago
@dethlokpiggiez Those will work but aren't great
chunkyfunkymonkey28 1 year ago
I disected the capacitor and made a smaller circuit on a sheet of perfboard. It's a lot smaller.
Elliottslingsby 1 year ago
that is awsome as. i am so gonna do that
kokanator100 1 year ago
lol i saw this on tv on the new's
krazbar1 1 year ago
my camera dont have flash can i still do it?
nagato94 1 year ago
@nagato94 no u need one with flash.
chunkyfunkymonkey28 1 year ago
@nagato94 no the flash button is what powers the tazer
mariokartrokz 1 year ago
This has been flagged as spam show
Well so much for that idea. I blew the capacitor. It was my first time making one but no sweat, I'll just have to be more careful next time.
JLR415 1 year ago
This has been flagged as spam show
Well so much for that idea. I blew the capacitor. It was my first time making one but no sweat, I'll just have to be more careful next time.
JLR415 1 year ago
Comment removed
LIV3nL0V3 1 year ago
I took the battery out and it still shocks me
yankeenick 1 year ago
i made one of those befor and i brougt it to school my principal got TAZED
jermainetheboy 1 year ago
Your instrucktional videos are highly apreciated. today at school i brang it to show my friends, and one of them got into a fight with some other guy ( he was black ) i had it, tazed him, he swoar like crazy and backed off. Ah, the use of technology. So my thanks to you.
redchain7 1 year ago
Yes it hurts bad
TheBlacksabbathfan9 1 year ago
before i saw this vid my bro showed me this stuff and i tried to make one shocked the shit out of myself
pleasmod 1 year ago
can i put four together to shock my cat when she bites me too hard? man i am a bloody mess.... here kitty kitty kitty....
witecracker2 1 year ago
I was trying to find out if i could do something like this with a cvs camera and it shocked me and hurt but i could still use hand does that mean the kodaks have better effect? and could one of thoser kill or paralize for a day or 2
BBGOTSKILLZ 1 year ago
@BBGOTSKILLZ All cameras are different. Nothing is gonna kill or paralyze you..it just jolts you for a minute or so.
chunkyfunkymonkey28 1 year ago
@BBGOTSKILLZ If you line several disposable camera capacitors in series it will probs work better
DanJeffery07 1 year ago
@BBGOTSKILLZ I'm thinking of building a capacitor bank and more bigger batteries
Gonthor1000 1 year ago
dude im 13 i did it an tis not that strong it looks rearly strong not rearly i even wet me finger an done it
BenAst97 1 year ago
@BenAst97 sorry my bad turns out i didnt push it on me hard enought this is so cool an paintfull
BenAst97 1 year ago
i would like to ask do u need to use seperate wires or doese the camera have its own and how do u get it the shape of a gun
TheChannel414 1 year ago
@TheChannel414 You need separate wires and if you actually watched the video, you would have heard that I used the casing from a drill.
chunkyfunkymonkey28 1 year ago
What kind of batter should I use if I want to eject a small shock so I can mess with friends?
Apacorn 1 year ago
man i got tazed by one of these things and they fucking hurt, i couldn't move my whole arm and
Rugbylover39 1 year ago
just spent 23 dollers and buy a taser stungun!!
joserbatuta 1 year ago
ok for last time it doesnt ramp it up it just stores it. there are different pieces on the circuit board for the ramping up part. r tard
THSO360mods 1 year ago
cheers for that - great
phatjointcrew 1 year ago
My word, what a nifty little gadget!
Should be called a 'Dispense with someone' camera.
SimboSays 1 year ago
do u now how powerful the gun is in volts and can i use a 9volts battery :D
airsoftnorway1 1 year ago
@airsoftnorway1 Please read the comments before you ask these questions. I've already answered this multiple times. Mine puts out ~330V. 9V battery may work but I don't guarantee anything
chunkyfunkymonkey28 1 year ago
@airsoftnorway1 No you shouldn't use a 9V battery: the circuit, and especially the transformer, are built for an input of 1.5V. This means that increasing the input voltage to 9V will not increase the power of your stun gun, it will only burn the transformer and short your circuit.
z0tx 1 year ago
it dont "ramp up" the voltage it just stores high voltage until ready to use
THSO360mods 1 year ago
@THSO360mods
It does ramp up the voltage from 1.5 volts to several hundred volts .
My flash has 4 batteries and ramps up to 330 volts .
dvdowns 1 year ago
so its normal for it to make that charged noise when you put the battery in and after you shock something? or should it not be making that noise after one shock and not pressing the button again? is it normal for the battery to be warm during this whole process? just wanted to know because i made one the other day and im concerned about these things. thank you.
Twables89 1 year ago
@Twables89 All cameras are different, but the charged noise and the heat are normal. It is a short circuit, remember, so results will vary because you are using the camera against what it was built to do.
chunkyfunkymonkey28 1 year ago
Nice video! A friend and I are making one out of a fugi-something camera. Doesn't come apart nicely like a kodak we just snaped all the plastic off and got the circut board. The capicitor is smaller then the one you have there but im sure it will still give off a nice shock. Pretty simple and cool to make for less then $10
SPECTER723 1 year ago
I was fooling around with it and sparked it up a couple times, I cant get it to spark anymore, did I break the motherboard or something? Not sure if I should buy a new camera and be more careful
ReDDeFFectZ 1 year ago
I touched the circuit board when the taser was charged by accident and it zapped me so bad that smoke case out. My finger hurt the rest of the evening.
yesiamawizardjonny 1 year ago
what kinda wire did you use?
TheDarkstar980 1 year ago
@TheDarkstar980 Just some regular 12 gauge
chunkyfunkymonkey28 1 year ago
Are those just pulses of voltage or does it have a consistent stream of voltage to... whatever the hell I decide to use it on?
mallard003 1 year ago
@mallard003 Just a pulse, think of the flash.. The bulb flashes, it doesnt stay lit
chunkyfunkymonkey28 1 year ago
@chunkyfunkymonkey28 still pretty interesting insights here. I think I may try a variant on your idea and pull the capacitors and daisy chain them somehow to stack the voltage.
mallard003 1 year ago
k heres how make a ok one take the camera diposible open it take fil m out and then theres the circut board there 2 sotter points next to lens there should be a flassh copper pice push it down carfully and then touch sotter points and something alos if u take the flashh piece off the copper piece and put it on those sotters it will sond like a firecracker went off.
MrLegomasters 1 year ago
Corto circuitare i condensatori, riduce notevolmente la vita dei condensatori...
this project i made when i'm a kid ;)
TYL85 1 year ago
hmm... sound a little like your shooting a pallet gun or taking a rubber band and stretch it and release , hitting a the table
leafinmilo 1 year ago
@leafinmilo You, sir, are wrong. The sound it makes is what it makes.
To all: Please stop flooding the video with comments trying to find some flaw or otherwise in the simple video I have posted. Get off Youtube and make one yourself so I can stop coming back here to post replies to smart assed people. Comments will be disabled if I need to k eep wasting my time with this, which wouldn't be fair to the people here posting questions.
chunkyfunkymonkey28 1 year ago
there's another way where you can just cut a wire and it will shock. i made the mistake of cutting the wire with all metal scissors. the ones with metal grips. if you hold it in your hands and it shocks you, the shock travels up to your shoulders.
wolfmanification1 1 year ago
@tman92119. I wasnt aware this was on manswers. I have been making these for years without outside help. Dont jump to false conclusions. Mike
chunkyfunkymonkey28 1 year ago
Wasn't this from Manswers? ... And you're taking credit for it? :(
tman92119 1 year ago
@tman92119 DOUCHE!!!
thescreamingfish 1 year ago
waley!!!
cocokuneho 1 year ago
how many volt is it generating?
pingolve 1 year ago
@pingolve --I think it's around 330V. That's what the capacitor says. I have no way of checking that though.
chunkyfunkymonkey28 1 year ago
@chunkyfunkymonkey28 wow! i got a capacitor at 200V +/- 20% i guess that would do the work
pingolve 1 year ago
@pingolve about 300
dvdowns 1 year ago
Hurts like a fuck i cant feel my left hand should i go to the doctor?
comehoot12345678 1 year ago
WARNING!!!! i just did this and it shocked me like HELL it felt like 20 or 25 bolts dont do it
RBkid10 1 year ago
i made one but it is not as shoking as that
fullfatfred 1 year ago
@AChepelkevitch any kind, get something thick.
chunkyfunkymonkey28 1 year ago
it hurts!!!
laton26 1 year ago
so u have to touch metal in order for it to shock?
crazykawafool 1 year ago
@crazykawafool Nope, anything, but metal creates that cool spark ;)
chunkyfunkymonkey28 1 year ago
It would be awesome to charge it and rip off the cap. and put plastic on it til you need to use it and carry it around and charge it again by the circut board :D
00011theman 1 year ago
The video clearly states that everything is at YOUR own risk. If you felt unsafe, you should have stopped the build. Or, you shouldn't have used it on a little kid. Sorry to hear about your problems, but there is nothing I can, or will, do about it, as per the disclaimer. I would appreciate if the comments to this story be kept to a minimum. Mike
chunkyfunkymonkey28 1 year ago
@chunkyfunkymonkey28 hey man if i put a bigger capacitor, it will do any change? and what about if u put 2 batteries?
Azteka 1 year ago
This comment has received too many negative votes show
Hey you dumb mother fucker!!! My lil brother got shocked by the tazer and is now in the hospital in critical condition. Ifucking hate you dont make any more videos that harm people. Please johnny need help.
AnDrEwEsTeS53 1 year ago
ha ha johnny. classic generic
shidoink 1 year ago
This has been flagged as spam show
@AnDrEwEsTeS53 DOUCHE!!!
thescreamingfish 1 year ago
could i use speaker wire and tape?
RAMPAGE2050 2 years ago
Yepp. Just get the thickest wire you can get.
chunkyfunkymonkey28 2 years ago
so basically the batery stores power in the capacitator, and when u touch metal it unleashes it cause u redirect the power with the wires?
Lh4nzi 2 years ago
Basically, yes
chunkyfunkymonkey28 2 years ago
Don't you just hate when your drill lights on fire.
BMB753 2 years ago
yeah man it's a bad day when that happens
chunkyfunkymonkey28 2 years ago
dude no joke i have same circet board and when i de charged it so it wont shock me i used copper to discharge it now it wont work but the battery and one part of the cirqet board heats up plzz help
Porche412 2 years ago
You probably shorted it out too much. Again, these circuits boards ARE not designed for this kind of application. Chances are, you might need a new one.
chunkyfunkymonkey28 2 years ago
paper clips work better then wires just saying
marineman1996 2 years ago
I'll have to give that shot, thanks for the tip :)
chunkyfunkymonkey28 2 years ago
I only said that something like 20 times in the video. Apparently some people are slow to catch on.
chunkyfunkymonkey28 2 years ago
how do you shock a person. like hold metal to them or do you not need the metal peice
PikaEvil 2 years ago
Just touch both ends of the taser to their skin. It won't spark but it will still shock them
chunkyfunkymonkey28 2 years ago
what kind of wire do you need? does it matter?
iou619 2 years ago
The thicker, the better. no pun intended.
chunkyfunkymonkey28 2 years ago
lol that big cylindar black thing shocks me without making all that shit, my finger is all limp.... ow
ItsKgZach 2 years ago
The button you pointed out, can it be pressed and used like an on and off switch so the battery isn't wasted and the taser is safe?
Awsome vid!
Nicolater1 2 years ago
On mine...no. That's doesn't mean all cameras are the same though. The best thing to do is guess and check lol
chunkyfunkymonkey28 2 years ago
this us awesome, my friend is unconsious from mine right now!
Z3RGLINGMAN 2 years ago
mine exploded when i put the wires on
DownwitTreason 2 years ago