OMG MAD SKILLS! Buying one of these tomorrow...I'll post the video response (and the treasure hunt for the parts when I slam it into the ground at mach-2!) Well done guys!
thanks. and dude, go to JAGHOBBIES or HELIDIRECT best prices on the web (i've crashed alot, so i spend alot of time looking for cheapiest prices... idk if thats a good thing O_O) and the fastest shipping. almost always have products instock.
dude... seriusly? they are trying to sell the belt cp v2 for $255 ! xheli/nitroplanes has them for $180 you an amazing pilot but i think your getting ripped off if you buy from them
I swear for part of that video the rotor blades arnt turning, its powered by witch craft i say!!!!
Also just ordered one of these with some extra carbon blades (as i know im going to break the first set) and a training set (so i dont ruin the second set of blades too quickly).
Hey i just got my training gear off and i wanted to know what i should do next... I wasn't to do forward flight but i don't know is thats what i should do.
dude, it all depends on what you are comfertable doing. i would wait until u can recover your heli, no matter what direction it is pointing at. meaning tail in, tail left, tail out, and tail right. try to practice hovering and slowly rotating your tail in any direction and try to keep it in one place. if you can do that, i recomend. flying forwards about 10-20ft. stopping, then flying backwords twords you. after you feel comfertable, fly in a pattern.
the camera man may have been drunk at the time. flying like me take alot of money, and alot of practice, i started chrictmas of 06 and i may have spent about $2,500 in helis and parts to get to this point.
and thanks for the comment, ill throw out a video of my belt cp when i get a chance. if you have any problems, just get it on video and send it to me and i should be able to diegnose just about enything you throw at me.
all you have to do is, but the esky B/L 3900 kv brushless and the esky 25amp esc. put them in and your done. BTW i an useing a 10t pinion. the motor drops right in, without any force onecesoevery. nothing else is upgraded. NOTHING
then continu hold the controle stick left or right, and when it get upsidedown, put the throtal stick all the way down. then flip it back over. if you recorde it, i can tell you what you would have done wrong if you crash.
when you think you are high enough, put it in idal up position. pull the stick left or right HARD, when it's sideways, put the throtal stick at mid point, this will give it nutral pitch.
i had my honey bee king 2 for about 3 months, i started 3D at about 1 month in, and hard 3D 2 weeks after. my B/L now is almost dead. it's a good motor for hover and ff. but it's a little to weak for long term 3D. im going to get a 3800kv B/L or and align B/L for the hbk2.
you have an extremely dangerous issue, you could be running then connections in reverse, but i STRONGLY suggest you DO NOT try no fix your lipo, you you cross connect them, it will explode, and i mean EXPLODE!!
alright this is going to be the last time i tell you guys, this is stock!!! everything (except an esky 3900kv, and esky 35esc) is what you get right out of the package. that sould answer all question regarding to this being sToCk!! if you want to know what stock stuff is, look at the bird at helidirect com
Nice flying! What is the name of the song in your video?
P.S. Sorry for my english. :)
idimych 2 years ago
paralizer
inrizspaxoxo 2 years ago
Nice flying. You know, I'd rather hear the motor and the blades....
chuanist 2 years ago
Hey dude, how fast can go this heli ?? do you have any stimation of it´s max speed ??
mandrakezu 2 years ago
could you put a bomb drop on this fing?
extrehound93 2 years ago
OMG MAD SKILLS! Buying one of these tomorrow...I'll post the video response (and the treasure hunt for the parts when I slam it into the ground at mach-2!) Well done guys!
funkyotherbrother 2 years ago
thanks. and dude, go to JAGHOBBIES or HELIDIRECT best prices on the web (i've crashed alot, so i spend alot of time looking for cheapiest prices... idk if thats a good thing O_O) and the fastest shipping. almost always have products instock.
shadowflyer101 2 years ago
dude... seriusly? they are trying to sell the belt cp v2 for $255 ! xheli/nitroplanes has them for $180 you an amazing pilot but i think your getting ripped off if you buy from them
mxf7010g8k 2 years ago
Do you have your gyro in normal mote or reverse?
slangemike 3 years ago
i cant tell you for sure... it was a while ago
shadowflyer101 2 years ago
yeah! you dont use head lock! Absolut skills!
todyBong 3 years ago
im flying a dragonus now, using a gy401. check out my other video
shadowflyer101 2 years ago
hey i want one to
djfjgfhgh 3 years ago
I swear for part of that video the rotor blades arnt turning, its powered by witch craft i say!!!!
Also just ordered one of these with some extra carbon blades (as i know im going to break the first set) and a training set (so i dont ruin the second set of blades too quickly).
magicebuyer 3 years ago
Hey, whats the flight-time of this helicopter?
Missile38 3 years ago
around, of id say 7-9 min. depending on how well it's tuned, and the way u fly.
shadowflyer101 3 years ago
Hey i just got my training gear off and i wanted to know what i should do next... I wasn't to do forward flight but i don't know is thats what i should do.
retsnom92 3 years ago
dude, it all depends on what you are comfertable doing. i would wait until u can recover your heli, no matter what direction it is pointing at. meaning tail in, tail left, tail out, and tail right. try to practice hovering and slowly rotating your tail in any direction and try to keep it in one place. if you can do that, i recomend. flying forwards about 10-20ft. stopping, then flying backwords twords you. after you feel comfertable, fly in a pattern.
shadowflyer101 3 years ago
what gyro do you use?
RcAntax 3 years ago
other than a b/l 3900 esky, and a 25A esky esc upgrade, it's all stock. byro, radio, servos, everything, all stock.
shadowflyer101 3 years ago
love the way the camera fps syncs with the rotor speed.
mrkillcrazy 4 years ago
i used to wreak about every 30th flight. now it's rare unless im practicing inverted hover low.
shadowflyer101 4 years ago
wreak about?
hellsshadows597 4 years ago
the camera man may have been drunk at the time. flying like me take alot of money, and alot of practice, i started chrictmas of 06 and i may have spent about $2,500 in helis and parts to get to this point.
shadowflyer101 4 years ago
geez... i'm geussing you didnt have a simulator or you just have REALLY BAD hand-eye-coordination
dubspins 3 years ago 2
Is the camera man drunk?
NoodlesR6 4 years ago
it looks like its on a string dont it
RedDragon01984 4 years ago
how easy are these to fly?
thanks
zam
zam640 4 years ago
thanks for the comments guys. dont forget to check out my belt cp video. it's realy special to me because after i filmed it. i CRASHED 0;
shadowflyer101 4 years ago
beautiful heli, i love the close up on 1:19 wonderful vid and very good flying, keep up the good work
14cyproit14 4 years ago
i dint post it after all, but its in my videos if anyone wants a nosey.
armolite 4 years ago
very nice flying !
obviously set up well.
ive posted a video response to this to show how to fit a 3800 with any size pinion, just in case anybody needs to know.
its not that easy though so id fit a 3900 if i was going to do it again.
armolite 4 years ago
and thanks for the comment, ill throw out a video of my belt cp when i get a chance. if you have any problems, just get it on video and send it to me and i should be able to diegnose just about enything you throw at me.
shadowflyer101 4 years ago
all you have to do is, but the esky B/L 3900 kv brushless and the esky 25amp esc. put them in and your done. BTW i an useing a 10t pinion. the motor drops right in, without any force onecesoevery. nothing else is upgraded. NOTHING
shadowflyer101 4 years ago
this other guy said that i would have to
-widen the holes
-measure spacers so that the pinion meets the main gear
-and elongate the motor screw mounts if i was going to use a 10T or 11T pinion
is this vid of a belt cp cause my hbk2 seams smaller
freetebet 4 years ago
fist off much respect on the flying
and your helicopter looked quick as
what will i have to do to put a 3900 engine on mine? cause the 3100 fits straght away but i want your set up
freetebet 4 years ago
the heli have modifications?
LeoRyan 4 years ago
yeah, just a 3900 kv brushless esky, and 25amp brushless esc. EVERYTHING els is stock.
shadowflyer101 4 years ago
cara neh parece o honey bee king parece com o t-rex muito massa!!!
victorfortal 4 years ago
English!
shadowflyer101 4 years ago
then continu hold the controle stick left or right, and when it get upsidedown, put the throtal stick all the way down. then flip it back over. if you recorde it, i can tell you what you would have done wrong if you crash.
shadowflyer101 4 years ago
skill and practis.
i started off at about 60ft up in the air.
when you think you are high enough, put it in idal up position. pull the stick left or right HARD, when it's sideways, put the throtal stick at mid point, this will give it nutral pitch.
shadowflyer101 4 years ago
iv'e got the honeybee king 2 but how do you get it to fly upside down???
leebethell 4 years ago
you have to have a heli that has negitive pitch.
shadowflyer101 4 years ago
How do you get it to fly inverted???
leebethell 4 years ago
you upgrade to brushless, but still using the stock TX/RX?
what is the brushless motor model, ESC rating and also pinion used?
any other tuning you made for the power system?
lyclycsms 4 years ago
yes, origanal tx/rx.
esky 3900kv, esky 25a ESC, 10T pinion.
if you are going to buy a motor, get the JGF 4400kv B/L, it will be better in the long run.
shadowflyer101 4 years ago
oh ya, i already get myself the same configuration with you.
how long can the 3900KV last?
the stock TX, the left hand/right hand knob is for what? what is your setting for the left hand knob?
and the throttle trim, when i put the BL motor inside, cannot make the throttle trim to the middle as this will make the main motor start turning.
and how you prevent the belt from slipping?
lyclycsms 4 years ago
ok,
i had my honey bee king 2 for about 3 months, i started 3D at about 1 month in, and hard 3D 2 weeks after. my B/L now is almost dead. it's a good motor for hover and ff. but it's a little to weak for long term 3D. im going to get a 3800kv B/L or and align B/L for the hbk2.
shadowflyer101 4 years ago
looking forward to see your latest flight man...
what's the battery that you use?
lyclycsms 4 years ago
stock 1000mah 11.1V lipo.
i want to get a bigger battery so i can have long flight time, and more power:)
do you have a honey bee king 2?
shadowflyer101 4 years ago
yes. i do have a king 2.
but i am not at home now so no time to play it yet.
just do some minor set up and get it flying.
if you use stock battery, won't it get bloat?
i'm using 1300mAh 20C and the battery will bloat a little after flying...
lyclycsms 4 years ago
you have a bad duck.
no battery should bloat unless it's you 200th or so cycle, then you know it's comming.
i would send it back if it's new and request another one.
shadowflyer101 4 years ago
do you get a visible spark when connecting the battery?
lyclycsms 4 years ago
LOL!!!
no,
you have an extremely dangerous issue, you could be running then connections in reverse, but i STRONGLY suggest you DO NOT try no fix your lipo, you you cross connect them, it will explode, and i mean EXPLODE!!
shadowflyer101 4 years ago
this is a no bull lipo explosion, all they did was cross connected the positive and negitive together.
watch?v=KpUXuEg3fNE
shadowflyer101 4 years ago
type youtube dot com /watch?v=KpUXuEg3fNE
shadowflyer101 4 years ago
not reverse, it's correct. i mean when you first connect the battery to the ESC, do you see a spark?
lyclycsms 4 years ago
nope
shadowflyer101 4 years ago
Awesome flying, how long you been piloting for?
TommyVuitton 4 years ago
ive been flying since christmas of 2006, my first heli was the blade cp pro. and this was my second one.
shadowflyer101 4 years ago
who is taking the video?
your GF?
my GF say the same thing.... you are too fast, i can't follow you...
lyclycsms 4 years ago
it's my sister.
shadowflyer101 4 years ago
The King 2 is a great mini heli, first time inverted is pretty scary !!
dougsrccom 4 years ago
no kidin, but this is my first inverted. and this was about 2 months ago. ill post some more vids of what i can do now (-:
shadowflyer101 4 years ago
cool man!
wdf4 4 years ago
What radio?
jodde73 4 years ago
alright this is going to be the last time i tell you guys, this is stock!!! everything (except an esky 3900kv, and esky 35esc) is what you get right out of the package. that sould answer all question regarding to this being sToCk!! if you want to know what stock stuff is, look at the bird at helidirect com
shadowflyer101 3 years ago
everything is stock, exept i have the B/L setup and fine tuning.
shadowflyer101 4 years ago
What setup are you using?
sd1177 4 years ago
thats what im looking for
nyehnyi 4 years ago