Which Rail System is Best for Airsoft? #4

[Commintor]

Nice thanks mate

[ODST262]

what rail woulb be for r.a.s

[skullteen27]

where can i find a cheap durable rail system for my CYMA CM.028 ak-47 (marui clone)

[joerox23456]

dude please get back to me on this, i have a cybergun ak-47 spetsnaz and it has a standard rounded top is there anyway to attach a rail to the top possibly without screwing into the body of the gun

[akmenagad]

@joerox23456 hey dude me to oh my god i cant beleive i found you what you do is you get a regular pica tiny rail from ebay or something.... or get a cheap pistol from wallmart that has the the rail attatchment then cut the top rail off, then you take your ak74 gun and take off the top turn it upside down and you will find 2 screws, unscrew them. then take off the crappy top sight and it should have a flat top for about 4 inches mod the rail to fit in that space and then screw the screws back in

[akmenagad]

@joerox23456 but i need 1 thing from you.... does a dovetail red dot sight fit on a pica tiny rail?

[DrShortizzle]

I have a M16 style rifle that doesn't have weaver rails on it. Is it possible to attach rails onto it, and if so, where should I buy the materials needed?

[DrShortizzle]

I have a M16 style gun that doesn't have weaver rails on it. Is their a way that I can install them, and where to buy the trails?

[Commintor]

@DrShortizzle, Buy them on Amazon :)

Good luck

[noctis008]

hey, can you make a video of how to install a rail system like DD mk18 ris II or like noveske rails and how to rewire the gun to the front?

[marffy30]

2:11 Ur butt cheek?

[kfeelsnopain]

cheek rest, the thing you put on your gun to rest your cheek on

[marffy30]

yah i know.

[moonreaper1]

I was wondering, would a pellet gun rifle scope fit onto a rail, i have a m16, its got a carrying handle rail and than the barrel rails

[gfsdhgbksalk]

20mm are the most comon rail type. and yes, if you have a scope with a 20mm rail mount it will fit on your m16. you can take the gun to the store and try it out in the back. (remember to plan it with the store keeper. or else ppl are going wild.

[toemandie1]

the "Barrel Rails" are called RIS rails. Rail Interface System and the carryhandle rail is just a Carrying handle rail.... -.-

[xkakashix12]

nope, air rifles usually have a dove tail type of rail

[PhenomI7o6]

i have a weaver rail on my JG M16 A4 and i have a $5 red dot site, it wobbles a little bit, but it fits fine but after a game, it gets loose, is there anyway to put some kind of glue or something were it will keep the screw tight?

[Searyu]

Is that first scope u picked up an NCstar scope? do u know if they are any good? or are UTG scopes better?

[xkakashix12]

both ncstar and utg make good optics

[Searyu]

dam........finally someone answers after 4 months -_- thanks man :)

[xkakashix12]

np, i'd probably go for nc star since they do make red dot optics for real steel but utgs are nice as well so yea

[NYHOCKEY123]

do mp5 scope mounts work on a G3 airsoft gun. im not sure if they do but since mp5's and G3's have almost the same body design i think it might be possible.

[AirsoftHanoverPA]

Yepp, they do.

[toonimp]

do u need a certain light to fit in your weaver thing or do you just need one 2 fit?

[phct]

i had a dove tail mount on my classic army mp5, didnt know it was rare

[AirsoftPost]

The MP5 is one of the few military issue wepaons that has a non-picatinny rail mount that I know of.

[ak47badpuppy]

i just bought a ak74 sniper version spring and wat kind of bbs should i use

[willman1661]

well that question does not have anything 2 do with this video but if u were using a sniper airsoft gun u would want anything that is .25g or heavier i use .2g on my tsd m14. even though i use it 4 sniping i found that .2g works best with that gun and its hop up system

[zigzag817]

i have a Q,my scope ring jigles when i screw it on my rail do you have any sugjestions

[pyromanusa]

i had the same problem with my sniper and i put a small peice of tape on the rail under the mount them used an xacto knife to cut out the excess and now it wont move

[jayswood13]

i have a question

whats the difference between 3/8 dovetail and 3/8 weaver?

[freemanfreiman]

thanks for the video. helped me alot. thanks!

[slaction]

Great Video!

[AlliedAirsoft]

another good example of a non scope ring mount is the m4s carry handle. it has a long attachment.

[cnate11]

I had recently gottent a vsr10 sniper rifle only to find that it doesnt fit my scope, which is dove tail, so I went online and purchased a 3/8 dovetail rail for the scope to fit, worked perfectly!

[shadowxps]

Great flashlight lol. Anyway good QaA. Weavers are awesome. True that the accessories are what they're really for but they just look so damn cool.

[paintballfuz]

Hey umm do u thing that u can do a little video on the rails of an MP5, because u know hot it does not come with an R.I.S. but u have to buy a special rails for like mounting a red dot onto it!!