@markhogsvagen It was meant in the most anti-sexual way possible :P - I was struggling a ton with it and out of all of my components that I installed this one took the most! Next time here I come H50 or H70!
Free energy has been here all along ,But some very powerfull ppl don't want you and me to be free from energy costs,if you want a real Free energy Magnet Motor, get the blueprints at LT-MAGNET-MOTORdotCOM ,take part in the revolution!
@TehAndrewRyan again they had high quality mics in 2010. your logic fails because you are telling me that in 2010 there were no high quality mics, therefore i can not comment 8 months later telling him that his mic sucks. why would it be any different if he did that video again today with the same mic? he could have back then bought a nice mic that would of done a far better job.
@GT5Enthusiast Wow dude, that's not what I'm telling you. I told you that it feels useless to comment an old video and tell him to get a better mic, tho he already got a better one and has maked new videos as well. You can't change the past, right?
@TehAndrewRyan and i was telling you the same thing, my comment was 4 months old, not that much longer than when this video was made. you are WAY late to have commented on my response.
I have a Zalman CPS9500 LED with a 1156 adapter, do you think this would cool much better than that? I'm not happy with my temps so even a little would help
Of course... I like the look of the mounting bracket on the SE2, as opposed to my SE. I got very nervous tightening it against my P6t, and the fit isn't as tight as I would like, although tightened all the way down. Temps are good, but the rubber feet on the new mounting bracket would prevent the butting up against the cpu block on underside of the mobo. Have to think they re-engineered it for a reason...
can u tell me how to install an extra fan like my gpu card tempreture is too high and i want to install a new 120mm fan for my gtx 285 do i have to install it infront of my gpu card but how? thank you and do i still need to overclock , after installing the 120mm fan and while installing 120mm fan , do i have to change any other origonal fan of my pc or not? help me out plz thank you
i got the old one not SE2 one since i have a AM3+ moderboard can I use the AM2 bracket on AM3+ ?
TheVerxia 4 months ago
Ordered this today :D With a 1055t stock what kinda of temperature drops can I expect from the stock cooler?
starwarsfan76 7 months ago
I got an i7 920 at stock speeds, what temps can i get with this?
Currently sitting on a 50oC idle with a Akasa heatsink fan, very similar to this but only one fane pushing air through.
Harrysound 8 months ago
OMFG! Skip to 3:25 to see the ACTUAL PRODUCT!
Video almost finished!
PirateKing1256 9 months ago
Is it 8mm heat pipes?
Zillamp3z 10 months ago
what is it? 1155/1156
SuperAMD007 10 months ago
@SuperAMD007 yes it's compatible, i have one with my i7 2600k
BMSillySylvie 10 months ago
@BMSillySylvie Thanks dude.. frickin happy, thanks!!
SuperAMD007 10 months ago
is it compatible with 1155? Please...
SuperAMD007 10 months ago
@SuperAMD007 Go check on Noctua website.
LoneRenzo 10 months ago
@SuperAMD007 yep!
rlmorgan95 10 months ago
90 mm or 120 mm please?
Garofild 10 months ago
Do i need to use the second fan if you dont OC?
Ox1ze 11 months ago
@Ox1ze not really, just make sure your temps are ok.
soldierpwnage101 11 months ago
its so expensive T_T
acogscopepwn 1 year ago
Linus I would love to see a video of you installing this bad boy.
Aldind2x 1 year ago
@Aldind2x That sounds...kind of wrong =)
markhogsvagen 1 year ago
@markhogsvagen It was meant in the most anti-sexual way possible :P - I was struggling a ton with it and out of all of my components that I installed this one took the most! Next time here I come H50 or H70!
Aldind2x 1 year ago
@Aldind2x I was just kidding =D
markhogsvagen 1 year ago
This has been flagged as spam show
Free energy has been here all along ,But some very powerfull ppl don't want you and me to be free from energy costs,if you want a real Free energy Magnet Motor, get the blueprints at LT-MAGNET-MOTORdotCOM ,take part in the revolution!
breeannaqktjbl 1 year ago
you got to get a better mic. its keeps topping off on the highs. good review though.
GT5Enthusiast 1 year ago
@GT5Enthusiast Just some notes..
1. This was shot outside, probably even with the cameras built-in microphone
2. This review is 2 years old, haven't checked his newer videos?
TehAndrewRyan 1 year ago
@TehAndrewRyan 1. they had quality mics 2 years ago.
2. this review is only 1 year old.
3. my comment is 4 months old, why the hell are you commenting on this?
GT5Enthusiast 1 year ago
@GT5Enthusiast For the same reason as you're telling him to get a new microphone, even though this video is outdated?
TehAndrewRyan 1 year ago
@TehAndrewRyan again they had high quality mics in 2010. your logic fails because you are telling me that in 2010 there were no high quality mics, therefore i can not comment 8 months later telling him that his mic sucks. why would it be any different if he did that video again today with the same mic? he could have back then bought a nice mic that would of done a far better job.
GT5Enthusiast 1 year ago
@GT5Enthusiast Wow dude, that's not what I'm telling you. I told you that it feels useless to comment an old video and tell him to get a better mic, tho he already got a better one and has maked new videos as well. You can't change the past, right?
TehAndrewRyan 11 months ago
@TehAndrewRyan and i was telling you the same thing, my comment was 4 months old, not that much longer than when this video was made. you are WAY late to have commented on my response.
GT5Enthusiast 11 months ago
This cooler is fantastic, keeps my i7 at 29 c on 50% use - 37 c at 100%
All noctua fans in my case aswell, quiet as heck, my keystrokes sound waaaaay more than my computer <3333 :D
BUT: Remember to use rubber dampeners, these fans vibrate like crazy...
TubeHacker01 1 year ago
shiny
jamshidfarrokh 1 year ago
gheeeey
Laserchicken88 1 year ago
@Laserchicken88 What a clever insult.
snipski0894 1 year ago
Isn't this meant to come with 2 noctua p12 fans ?
c64geff 1 year ago
@c64geff maybe if the sun shines
livai007 1 year ago
is that "shiny flat finish" (at 3:30) not some sort of protection plate for the actual copper surface?
warnahati 1 year ago
This has been flagged as spam show
neeeeeeeeeeeerrrrrrrrrrrdddssssss
mk822000 1 year ago
@mk822000 Oh yes mate! thats the shit!
TheSympathon 1 year ago
Does this work on a AM3 chipset>
meteal666head09 1 year ago
@meteal666head09 yea it does work on AMD but you probly dont care now because you posted this a month ago lol
jamesrogers93 1 year ago
@meteal666head09 *am3
jamesrogers93 1 year ago
I just got this from the NCIX in Vancouver. It is really good!. I have my i5 at 3.8ghz and the idle temps are 30 and load temps are 60!!!
PatarTheBeast 1 year ago
I have a Zalman CPS9500 LED with a 1156 adapter, do you think this would cool much better than that? I'm not happy with my temps so even a little would help
Jorgie0101 2 years ago
Scythe Mugan 2 rev. B :)
sjoerd94 2 years ago
Look at Noctua they packed Intel mounting kit in a nice gray box but AMD kit in a dirt cheap plastic bag LOL
OjRuLeSs 2 years ago
@OjRuLeSs
because the Intel mounting kit has a big backplate and stuff that prob won't fit in a plastic bag.
ThuGfunk 1 year ago
Great Vids man. But is opening computer parts really your job? If so, where could I apply. LOLz.
civixboi 2 years ago
You have one of the best jobs in the world
GGGunitNextLevel 2 years ago 3
actually this is first street style HSF review I have seen :)
JohnyBravoSix 2 years ago 26
Nice video pal :)
JohnyBravoSix 2 years ago
"If i could get this open, i would most certainly open it. Cause that's what i do, i open things."
love it!
Albueable 2 years ago 77
@Albueable ha yea, thats probably the only "box" he's over opened.
ha XD.
skaterboy379 1 year ago
Keep up good work!
SpongePeet 2 years ago
Thank You Very Much!!!
jedka 2 years ago
Of course... I like the look of the mounting bracket on the SE2, as opposed to my SE. I got very nervous tightening it against my P6t, and the fit isn't as tight as I would like, although tightened all the way down. Temps are good, but the rubber feet on the new mounting bracket would prevent the butting up against the cpu block on underside of the mobo. Have to think they re-engineered it for a reason...
mrgoodkat218 2 years ago
oh wow 2 fans included, nice value.
dropcitizen 2 years ago
the147break 2 years ago
is it better to install one fan to the cooler and the other to the rear of the case or both fans to the cooler ?
plz reply coz i'll install it like..........today o_0
crystal19831 2 years ago
very cool
fibrillatorD 2 years ago
lmao this guy's funny... "If I could get this open I would most certainly open it"
xjjjay 2 years ago
Is this on newegg? When I get my core i5 setup next summer I'm getting this sucker :)
Hekynn 2 years ago
thats not flat o-o
soulcrackerz 2 years ago
Just orderd one can't wait to get it :)
ReDFoX2200 2 years ago
i would get this cooler but the color of the fans =/ they are....like choclate color lol :p
Homebrew2all 2 years ago
sweet a special edition 2 screwdriver!
Peetah16 2 years ago
Omg free angled screwdriver!
cardboardsnail 2 years ago
"Thats what I do, open things" :D
dale456654 2 years ago
HAO MUCH IT COST
KounterMusic 2 years ago
79.99
galuple 2 years ago
check amazon I orderd one for $66.95 +(free shiping)
ReDFoX2200 2 years ago
Looking nice! Still hate those fans though
op2rules 2 years ago
This coler is great I am running one on my i7 anbd it works well.
REVHE4D 2 years ago
Nice! Great review Linus!
Keep it up!
LaczupakabraPL 2 years ago
I'm beginning to suspect Linus is a homeless dude hired by NCIX to do reviews, they won't let him inside with his shopping cart.
jblackrupert 2 years ago 5
Agreed.
AdamDiddy 2 years ago
Seems like a good theory.
tysonayt 2 years ago