Airsoft GI 101 - Basic Fuse Diagnosis

[aklepsbeast22]

YAYYYYYYYYYYYYYYYY Thankyou !@#!@# I fixed it, well you helped

[XxSiCk360MoDzxX]

can you buy any of the fuse bubbles any where

[GamingPortalStudios]

Is there a certain amp fuse that you have to use with a G&G GR16?

[gunsmith380]

what do i do with my scar h type box fuse thing please help?!

[lizdances01]

i have an m4 crane stock and it does not shoot at all i charged the battery but when i connect it the motor just heats up when i pull the trigger. does anyone now whats wrong with it?

[horrordudealma]

Thank you so mush you just saved me from selling my new $250 gun

[airsoftalex100]

want kind fuse do i use for my mp5 ??? meaning size

[iRSandCod]

my G&G Combat machine raider. the gun wont shoot, but it doesn't have a fuse??

[airsoftalex100]

@iRSandCod it shot have a fuse in the back or in the hand guard

[xMRxIR0NMIDGET]

I need a fuse for my G&G F2000, it says F25A250V on the side, and it's a 5''30 fuse and I can't find a replacement. please help!

[crunkdaddy11]

what if you pull the trigger and nothing happens no noise no nothing it just randomly stopped shooting i have an cm028 ak 47

[123airsoftninja]

@crunkdaddy11 If you feel you motor jerk, your battery is low or your motor hight is too high. If you can't feel anything, you have a disconnected wire or a blown fuse. If you hear a significant click through you trigger, that tells you that electricity is flowing though and you motor is too high or dead. Good luck!

[MrHeadHunter1221]

I have an fmg4-1 and i have a different fuse box than what the video has its black.I dunno what to do plese help!

[blueswin3]

@airsoftgidotcom does your store carry the little fuse boxes that the fuses sit in bc I lost mine long story

[MrGerardwayowns]

i cant find the fuse in my SCAR somone please help

[Thatonekid131]

@MrGerardwayowns The Echo 1/ Dboys do not come with a fuse.

[pmarggraf17]

i bypassed my fuse what do i do fyi my gun didnt work aafter that

[ExtraKawaii]

@pmarggraf17 It means there was a short in the gun and you just thoroughly fucked it up.

[pmarggraf17]

@ExtraKawaii how much will it cost to fix

[ExtraKawaii]

@pmarggraf17 How much was you're gun?

[pmarggraf17]

@ExtraKawaii 175

[ExtraKawaii]

@pmarggraf17 Then it'll cost you $175 to fix mostly.

[pmarggraf17]

@ExtraKawaii well if the gun cost 175 why would a motor or possible just wires cost 175 u dont have to upgrade anythinh u just get replacment parts soi dont get why it would cost that much

[ExtraKawaii]

@pmarggraf17 Look at a decent quality motor and new wires then if you're willing to open it. If you don't know what you're doing (and it assumes you don't) get a new gun, or give it to a tech.

[trebombninestair]

I LOVE YOU

[Justcodmod2]

for superqwert11, dont buy the area m5a1, i did and it broke really fast and the 9.6 1500 mah batery(which is recomended) melted the

wires

[andromedarr]

I want to take out my fuse. If i am carefull, this should not be a problem, shouldnt it?

I mean, shortcircuits are not that dangerous on a Nimh, and they are very very rare if my motor is not blocked, and if i'm usingn high grade wiring

[SuperQwert11]

Wut does the fuse do im planing to buy a ares m4 thinking if i should buy one

[imgod123100]

I did the thng tht u did without using the Duse and my battery made a weird noise and some type of liquid came out, what do kno. I have the m15a4. Please get back to me as soon as possible. Thank you

[xXballpythonXx]

I got a g&g gr16 i just got it i shot it like 7 times they next day i pulled the trigger once it shot but when i pulled it again nothing happened do u think its the fuse cuz i chared my battery to the fullest and it ticked me off cuz i spent 220 on this gun

[stevothegrand]

@xXballpythonXx I have the same gun with the same problem, did you ever find an answer?

[Jmoney22101]

Do any of you know how to open the gr16 fuse box?

[limeisrichard]

@Jmoney22101 if ur holding it push together and twist it should open

[misita1]

what if I put in a weaker fuse? could it result in gun not shooting?

[Leok450]

My gun is screwed up. It hasnt been working with any battery for a year, I bought 2 fresh batteries and there charged. Today I started firing it to adjust the motor height and it fired maybe a few shots and then stopped. Then I connected my other battery pulled the trigger and nothing happen and then the fuse blew out. I tried the trouble shoot thing and still didnt work, the motor connetion is fine so? I have no idea what is happening. Is it possible a bushing is coming out and touchingthegears

[THEGHILLIEDSNIPER]

is it possible when you bipass the fuse that your gun will shoot full auto when the selector switch is on semi?

[AirsoftPlayer10]

hhmmm i can go out and buy a $2 fuse or i can risk my $45 motor for fun...this is a hard one

[Sp00LcoX99]

i overided the fuse a while ago, but im experiencing the same symptoms. im thinking the motor burned out. help plz

[Curtofthehorde94]

Wut fuse is needed for a GR-16 Carbine? its WAY smaller than most other guns and i cant find a small enuf fuse with 30 amps. plz link a place with em?

[Maxrock9]

Would there be any differences in using a fuse and not using the fuse?

[pranka13]

I just got my gun right now and before I could fire my first shot the fuse blew. I heard it sizzling and it got really hot. the gun is a G&G M4A1... and i have no idea how to open the fuse box. Also, would an Echo 1 M15A4's fuse work in the G&G? Please let me know.

Thank You.

[airsoftmasters]

@pranka13 yes it will work

[bloodyboy435]

Ok, does a bettery have to go in a certain way, because whenever i put in my battery, i have to twist it and turn it to shoot even on a full charge, and still it doesnt stay shooting, when i first got the gun it never did that, also its a JG M16A3 so full stock.

[Adriankat]

Is it possible for a battery to have a too high of a voltage for a fuse? My 9.6v mAh blew my fuse in 500 rounds.

[DaRaNdOmWaFfLeS]

Does bypassing the fuse lower the fps or rate of fire or anything...?

[thevideolord]

what do i do if the conector brakes

[thevideolord]

what do i do if the brass conector brakes

[HARDFLIPb0y]

I Have Bought A 30$ Gun From Airsplat... Do You Think My MP5 Will Have A Bubble Fuse?

[tigerm48]

A good thing to do instead of dealing with fuses is just snip the gold things off and solder the wires together. more ROF and no problems.

[alex619619619]

umm I just got ma new echo 1 m4a1 carbine just a few days ago. i'd tried shootin it a couple of times the second day & it stopped firing. I'd realized the fuse been blown so I tried takin the fuse out & bypassin it. it still wouldn't fire. all it did wuz itade the battery warm when I bypassed it. plz answer back helpin me out.

[alexizkewl432]

im using a 9.6v battery with a gaurder torque infinite moter how big amp do i need to hav cuz i hav tried 5's and 10's and they short really quick, any advice?

[airsoftsoldier12]

is it good to keep the fuse out if your using a 10.8 volt battery

[ARX7ARBALESTZ7]

@airsoftsoldier12 i'm using a 11.1v, better to keep the fuse in just in case. if your gun wont shoot and your fuse is fine, right away you know something is wrong with your gears. that's how its been for me anyways

[CaIlidus]

Hey is it bad to take away the fuse?

and to keep the two copper pins connected to each other.

Please let me know ASAP.

[antoniothedog]

@CaIlidus you shouldnt do that is some what fine on simi but dont do it to long on full

[FahQiWin]

I need big help just got a d boys m4 and i shot it twice then it has just been on rapid fire even without pulling the trigger every time i connect it to the bat. It just goes crazy please help

[blackash05]

omg thanks soooo much!!!  i commented about the cm028 ak47 vid and i said how my gun did a fuse! i thought i was screwed but i watched this and it worked!!! thanks 5/5 and i subscribed!!

[whysogrim]

What if you pull the trigger and there is a clicking noise?

[xEcho419x]

i always take the fuse out, I only find it useful if your using a battery higher than a 10.8

[paintballer9608]

what if you can feel the motor twitch but the gun doesnt shoot? please help

[armyango]

i have the same trouble ): ..do you fix your gun?

[paintballer9608]

yeah but only when i know what im doing but do you know how to fix it so i can?

[panic811]

@paintballer9608 your gear box is locked up or your battery is dead. if your battery is fully charged then your gears are locked up inside and all you need to do is open it up and it should unlock.

[PSP5559]

@paintballer9608 recharge your battery.....

[airsoftmasters]

@paintballer9608 check motor height

[freakyfunk17]

@paintballer9608 It's still an electrical problem... make sure your leads aren't switched (red goes to red)... When the leads are reversed, the motor can "twitch" when you pull the trigger...

[Nehless11]

@paintballer9608 low battery.. LOL

[URaBaboYongpa77]

@paintballer9608 did you ever find out how to fix this? cuz mine does this too

[TeamFMJAirsoft]

@paintballer9608 i bet you that your mag is miss feeding. unless it is completely silent. than IDK

[Spazman100]

@paintballer9608 Same thing happened to me. It likely means something got into the gearbox and is jamming the gear. I still need to fix it, but I don't trust myself to take my gearbox apart.

[rhinogek]

@paintballer9608 loosen the screw on the bottom of the grip. it's too high up

[RedemptionAirsoftTv]

@paintballer9608 probablly dead battery.... but its been a year i bet you found the problem by now

[017981071]

@paintballer9608 Thier is enough power from the battery to spin the motor but not turn the gears and fire the gun. Charge your battery

[11finger11eleven]

@paintballer9608 gears locked up and ur motor cant turn it.

take apart your gearbox, check for broken teeth on your gears/piston(and replace if necessary), reshim it, and put back together, should be working now. or... send it in to a proffessional

[017981071]

@paintballer9608 Battery is sending power to the motor but not enough to actually turn the gears.

[DandMAirsoftMI]

@paintballer9608 ur battery is burn out

[NavySealSniper23]

@paintballer9608 i had a problem similar to that it turned out to be the battery was a bad one

[Arbitor69]

i tried bypassing it and my gun shoots for like 5 min nonstop then just slowly dies down, then i put the battery in my friends gun to see if it was the battery and it worked fine..... anyone know whats wrong with it?

[AtlantiXYL]

or solder it?

[anote210]

How Many AMPs should the Fuse have?????

[bradenskateboard]

i tried this without reading the comments about how it can start a fire...and sure enough the battery and wires got real hot and smoke came out of the back of my gun....ive been told i only shorted out the battery.....try at your own risk!

[sergeantjeremy]

i have a jg m4 and i cannot bypass my fuse and i did it like 12 times in each position but it will not shoot what should i do and what do u think happened

[airsoftlovesryan]

any fuse will fit your airsoft gun ?!

[AirsoftHanoverPA]

I heard that bypassing the fuse increases your rate of fire. Can anyone verify this?

[IhateSatan333]

It doesn't.

It increases your risk of burning out your motor though.

[AirsoftHanoverPA]

Actually I asked an electrician this, and a fuse introduces a slight amount of voltage drop in the circuit, so without a fuse the voltage is ever so slightly higher which means higher ROF. As you said though, the risk of burning your motor out isn't worth the ROF.

[bob2cool11]

So if i buy a new fuze instead of doing this, the gun will kinda work like new? And how much could i buy a fuze for? I thought it was the wiring in the battery and was going to buy a new battery, lmao!

[105thGRProductions]

@IhateSatan333 do u know were i can buy airsoft fuzes?

[pwrbytrd]

if you bypass fuse then there will be a huge chance of a fire coz your circuit is not 100% protected.

[6mmMarine]

thank you very much you helped me a lot

[yanksfan2618]

ASGI, i think to say that fuses account for most electrical issues is an overstatement. I buy a lot of boneyard guns and from my experience the trigger contacts are the most common issue.

They burn out really easily (especially clones, although i just bought a CA that had the issue)

what's your take on this, im really interested

[xxCookfast9xx]

if you do a bypass on the fuse and something wrong occurs then your battery will set to flame or smoke i wouldn't recomed this because it happened to me not a good idea in the long run

[yanksfan2618]

there's not really that much of a chance of that happening. I've been running fuseless FOREVER with no issues. I understand there's a risk, but I think you got a rare case

[Shinakumiatsu]

I wish this came out a while ago. It would have saved me alot of time acting like an idiot.

[AirsoftPOW]

Is there any disadvantage to bypassing a fuse. And if you did could you wrap it in electrical tape instead of putting it back into the plastic "bubble"?

[betheviper]

whts the point in the fuse thn if it works with out it?

[randomassbalaclava]

u can do it to test it. but using it more times without the fuse the electrics will blow

[sk8er4life123456]

well, i bypassed the fuse on my gun, cuz all it is is a fail safe as i described below

[betheviper]

ah ha good idea to have a fuse then! lol =] thnks

[sk8er4life123456]

its a fail safe so you dont short out your wires, its for kids who don't know to stop pulling the trigger when it stops firing

[FlipSnipeZ]

Why doesnt Airsoft G.I sell BDU's and stuff like that?? I only buy from evike because i want to buy all from 1 site..

[shanedude93]

yeah that gets annoying i was planning to buy a huge multicam setup but no uniforms

[FlipSnipeZ]

i know right,

AIRSOFT G.I SHOULD SELL UNIFORMS!!!!

[Norcalsk8er33]

what is the problem if your gun shoots full auto when your gun is in semi auto postion

[ThisGuyOnLive]

your selector plate has been damaged, or there is a short somewhere else inside the gearbox.

[Norcalsk8er33]

ok thanks...but can it get any worse from there and what can i do about this to fix it

[ThisGuyOnLive]

Not really, All you need to do is open up the gearbox, replace the selector plate/parts and re-assemble it.

Or take it to a local shop...

[KempoJoe87]

Airsoft GI is AMAZ?ING if u buy anything airsoft online make sure u go thru them

[Airsoftmikey1]

yea it can fir wiring and motor i don't advice not using a fuse

[shadowgundamzero]

all removing the fuse does is make it so you can shoot your gun for long periods of time without worring about it blowing out, but what you end up risking is if youre not careful you'll burn out and melt your motor or if on a high FPS setup maybe even crack/break your mechbox shell. if you are very careful though you'll be fine. hope this helps.

[Blank00024]

if ur gun shorts out then it could hurt your internals.

[MaYbYl8eR]

i blew my fuse, and tried to replace it with 2 different kinds, but both blew instantly. Whats the problem?

[shadowgundamzero]

one of two things, either the fuse you replaced the original with wasnt identical to the original, or you have your wires are exposed and shorting out on a metal surface somewhere on/in the gun. check those and if not write to me with what gun you have and ill help you out.

[akunz911]

is there a bad thing in taking out the fuse?

[ThisGuyOnLive]

Yeah, you can burn out your motor if you run a strong battery.

[zewfilms]

is there a diferince with the gun with the fuse or without it?

[jedimaster1534]

is there any advantage of bypassing the fuse?

[Airsoftmikey1]

nor realy sometimes a higher rof

[drumZ4life19]

cool