360 Controller dissassembly

[loogibs]

i just cant undo the screws

[Mcl0vin11]

I fucken hate when the controller flashes at low battery! Urrrggh!!!!

[tinyredbull9]

a wat flathead

[DukeNukenum]

Also the screwdriver that is made for those screws is a torq security, size t8. I just had a regular torq screwdriver, just a regular star shaped one. the security has the hole in the middle to accomodate for that stupid nob in the middle of the screw.

[Rosspickle]

@DukeNukenum hey uhh were can i get the torq sicurity one cause i got a ragular t8 but ya it wont work:(

[DukeNukenum]

Probably a hardware store like home depot or something. If they don't have it ask a specialist for stores that may sell it.

[DukeNukenum]

Dude that is sooooo sneaky, hiding the last screw that i could not find under A FUCKING STICKER. I know microsoft wants to keep ppl from modding controllers, but i legitimately needed to fix mine, my stupid mic broke off inside the controller.

[DukeNukenum]

Dude, my fucking mic broke off in the damn controller, now im sittin here breaking the pins with a philips head, and unscrewing them with a star head screwdriver, this shit is SOOOO ANNNOYING.

[TheTermanillyZen]

Thanks bro. i gotta get a smaller flathead, those screrws are like the size of my boyfriends dick. Tiny as fuck.

[Bowser224]

lmfao

[sparkyman2009]

wut the hell?

[TheTermanillyZen]

ive just watched this video for the first time and aside from the sound going out like 30 seconds in i still do not understand how you did this with a flathead, the screws are small as fuck and that metal piece is not easy at all to break in the bottom four screws. I BE STUCK SON

[1Ravangers1]

you get a small flat head, jam that shit in there and turn it counter clock wise, you dont break the pin in the middle, you use it to turn the screw driver against the wall of the screw, the sound cuts out because i dont say anything so i turned it off because of the high pitched whine my old mic used to make.

[Bowser224]

i sound so weird 2 years ago, lol

If your STILL having trouble comment

[GAMERGUY11111]

i love little genius people like this who can figure this shit out : ) just for that i give you A 5/5

[999sup999]

lol if u got the little gay piece of metal inbetween the screws ye jsut get a tiny philips screw driver (the flat headed 1) and snap them off lol i dun it by accident :D and then find a tiny star headed screw driver :P

[mjvg1]

my RB button doesn't work and i dont know why and y dont know where to find the T-8 screw

[littleweapon12]

theres a little bar in the middle of my screws so i cant unscrew up

[c0ss3r]

yeah how do you move the bar thing>????

[littleweapon12]

you need a saFETY screwdriver you can buy them at home depot

[Lawls8]

you can just break it off its pretty brittle

[ItsGriffin]

break it off with what?

[batoe]

damn i can't even take the screws out,,, i have a screwdriver like yours, but smaller...the screws are too tight on my controller it was easy on my friends :(

[Blo0dYbuLL3T]

i have a little thing in my screws but i cant unsscrew i have a t8 thing

[beneaththemassacre13]

if you have a small drill bit, then you can drill out the "security" part in the middle of the screw. thats what I did.

[Bowser224]

i also used this method and it is way easier however it takes more skill, will really rape the screws and its hard to get a drill alot of times.

[Xx2Penguin3xX]

wait how do you unscrew threw the security part in the middle

[baseballbeast2]

wtf are u talkin about

[Xx2Penguin3xX]

im talkin bout the security part in the the middle of the screws on the back of the 360 controller

[lenniemaxim]

you need a T-8 security torx driver

[Bowser224]

the store...

[UntoldSecrets1]

ooo the store lemme go to "The Store", yea maybe the store has T-8 screw driver. plus i dont need it anymore, the controller is broken, so i opened it up by breaking it.

[Bowser224]

stupid bitch

[1Ravangers1]

Flathead worked for me

[Bowser224]

leave a comment, i'll try and help you out if you have any problems

[SAproducti0nz]

yes it does

[gamepunker]

the flat head does not work dumbfuck

[Bowser224]

well thats how i did it try a hammer dooshbag

[nonamestopick]

okay.... this is pissing me off because on the screw part there is a little mettle part inside the screw that the screw driver cant fit

[Bowser224]

you need a REALLY LITTLE FLATHEAD and you just jam it in and turn it until it works, if you still cant get it just get a wired one and it has normal skrews

[donovanwilder]

THANK YOU i had no idea there was a screw under that sticker lol and i was sitten there tryin to pull it apart and shit

[baseballbeast2]

hahahahaha

[lildrummer1001]

its hard as hell to find the correct screw which is a T-8, but the one i have doesnt have a long enough shaft so i grinded it down to make it work..lol

[nanogameboy]

lol. u cant even take off the d pad? lol i can disassemble it all buttons off except for triggers

[Bowser224]

i've taken it off befor... i just didnt feel like it in the vid...

[jeff81192]

Thanks..... my x button got stuck so im trying to fix it. I was thinking about doing it that way but wasnt sure it worked. thanks

[Frakenvader]

yo, how do you grip the srews with the screwdriver?

[Bowser224]

you need a very very small flat head, then you jam it into the edges of the security pin that is inside the screws, its hard but once you do it the first time they get loose.

[shashlo]

lol nice bandaid

[crazyjose101]

omg i love ur voice baby.. =p...by da way ps3 is better than 360

[Bowser224]

lol @ u

[SergeantSotoX]

ima test this out.

[Bowser224]

an easier way is to use a security T-8 top but its hard to find

[Jplaya85]

yeah i only have T-10

[Bowser224]

i jammed it in, youll probly strip the screws thogh*