would any of you guys wanting to find a helicopter?? i have a raptor 50 and a mini-titan that i do not fly much any more. just ask me and i will send you some more info
i only have the raptor 50 left. I have a dx7, aerospire gov on it. headspeed is at 1500 in normal think 1900 in idle 2. i have mavrick carbon blades for it. all new servos. and the align 2 in 1
yea it was up thats why you hear it bogging when i tried to give it negative pitch. i am going to prob do a flip on my raptor 50 today. i hope i will have a vid of it
Alright man... First of all you were way to low to try inverted or a loop with an Axe CP.... Second of all, when you do a loop or flip with a helicopter, You get plenty of FORWARD Speed before you do the loop, in this video you were just going up vertically and slowly forward speed, and then just pulled back on the stick, and it just went straight down, next time try to fly FAST foward pretty high up and then pull back hard, the Axe'll do it....
yea i really dont know lol.... but once i get the belt mod for it i bet i will try it again!! my pitches were way off so thats prob why i bet. its too easy for me in the sim exspecialy when there is a brushless motor in it. i bet im prob going to buy a dx 6 or something along that range just to super tune it!!
another update lolol.... crashed it again the wind took it a lil and it went over my head. now it was nose in which i am ok at but not very good. i can hover for like a minute untill it gets out of hand.. going to be getting the aluminum swash.. the lipo is a lil damaged but it still works good(i hope lol)
NEWW UPDATE ON MY AXE CP..... IT FLYES BETTER THAN EVER RIGHT NOW i have gone about 30-40 feet now and i will be doing a roll here pretty soon when its calm.. when i was hoverying it like a foot off the ground i didnt have to touch the stick for prob a minute.. the lipo battery works perfectly.. the upgrades i have so far are the lipo battery and cnc blade holders..
hey any has a heli max axe cp if you break the ball on the blade grip heres one to repair it you need a small drill bit one strong wire and some c.a. drill a hole in the blade grip and the broken ball and then insert a strong little wire or a small nail or a pin and make sure you have enough wire or nail or what you want to use so bend it to the rest of the blade grip supporting itand then glue the broken part and the wire on the blade grip and wait altill its dry
im going to the hobby shop today so yea will check in on that thx.. the sim is too easy to do inverted i can hover inverted there easilly.. the sim is nothing like the real thing!!! sim way too easy.. my lhs said that you should be good about 20 foot in air that was prob 15 i would say.. will try agian very soon: ))) i will try it on the sim at hobby too..
yea i had it up u could hear the rpms go down kinda i dont no if that was the pich of the blade changing or what but once i get the new main gear in and new servo i will try it again soon... a lil higher this time
ill prob go to the hobby shop tooo to get the swash leveled and stuff so i dont mess it up..
and i just got a new lipo 1300mah 3cell lipo battery which would speed the head up more which i will prob use for more stability :) gona prob need a new tail motor.. ive been looking at the new freestyle hobby belt tail rotor. i may get that
The guy that said the axe is not for inverted is crazy. I fly the living shit out of mine. It will do everything my trex 450 and rave 450 with do.
91Racing426 2 years ago
owned
mamoy28 3 years ago
man sorry about the bird but things happen
siresoul2 3 years ago
would any of you guys wanting to find a helicopter?? i have a raptor 50 and a mini-titan that i do not fly much any more. just ask me and i will send you some more info
motoxmaniac93 3 years ago
how much, for the mini titan and the raptor 50
arsithepspkid 2 years ago
i only have the raptor 50 left. I have a dx7, aerospire gov on it. headspeed is at 1500 in normal think 1900 in idle 2. i have mavrick carbon blades for it. all new servos. and the align 2 in 1
motoxmaniac93 2 years ago
like probably said before
you need way more speed to pull that off
one other thing its next to impossible to fly inverted of do most other aerobatics
maybe with the bell hiller upgrade
bfap 3 years ago
an axe is not the heli to invert. tough fact to face.
quay0007 3 years ago
how much did u payed for it?
tommydulbecco 3 years ago
Sounded like a mouse getting strangled.
KoopmanG 3 years ago
Did you at least put the idle up switch?
limeblast 3 years ago
yea it was up thats why you hear it bogging when i tried to give it negative pitch. i am going to prob do a flip on my raptor 50 today. i hope i will have a vid of it
motoxmaniac93 3 years ago
need to be moving along quick in forword flight before a flip
surfergee2 3 years ago
Alright man... First of all you were way to low to try inverted or a loop with an Axe CP.... Second of all, when you do a loop or flip with a helicopter, You get plenty of FORWARD Speed before you do the loop, in this video you were just going up vertically and slowly forward speed, and then just pulled back on the stick, and it just went straight down, next time try to fly FAST foward pretty high up and then pull back hard, the Axe'll do it....
chevypower1930 3 years ago
hey how can this happen with the axe.... in the sim u can do it? inverted
ocourtner 4 years ago
yea i really dont know lol.... but once i get the belt mod for it i bet i will try it again!! my pitches were way off so thats prob why i bet. its too easy for me in the sim exspecialy when there is a brushless motor in it. i bet im prob going to buy a dx 6 or something along that range just to super tune it!!
thanks!
motoxmaniac93 4 years ago
another update lolol.... crashed it again the wind took it a lil and it went over my head. now it was nose in which i am ok at but not very good. i can hover for like a minute untill it gets out of hand.. going to be getting the aluminum swash.. the lipo is a lil damaged but it still works good(i hope lol)
going to be getting another one of those too..
motoxmaniac93 4 years ago
NEWW UPDATE ON MY AXE CP..... IT FLYES BETTER THAN EVER RIGHT NOW i have gone about 30-40 feet now and i will be doing a roll here pretty soon when its calm.. when i was hoverying it like a foot off the ground i didnt have to touch the stick for prob a minute.. the lipo battery works perfectly.. the upgrades i have so far are the lipo battery and cnc blade holders..
motoxmaniac93 4 years ago
sorry i didn't check it
redice2009 4 years ago
hey any has a heli max axe cp if you break the ball on the blade grip heres one to repair it you need a small drill bit one strong wire and some c.a. drill a hole in the blade grip and the broken ball and then insert a strong little wire or a small nail or a pin and make sure you have enough wire or nail or what you want to use so bend it to the rest of the blade grip supporting itand then glue the broken part and the wire on the blade grip and wait altill its dry
redice2009 4 years ago
you can get gears for the servo you know?
All you have to do is take the bad gears out and swap the new ones in.
You should of had more altitude
team222badbrad 4 years ago
im going to the hobby shop today so yea will check in on that thx.. the sim is too easy to do inverted i can hover inverted there easilly.. the sim is nothing like the real thing!!! sim way too easy.. my lhs said that you should be good about 20 foot in air that was prob 15 i would say.. will try agian very soon: ))) i will try it on the sim at hobby too..
THANKS FOR WATCHING GUYS lol
motoxmaniac93 4 years ago
What sim do you run?
jpbeck01 4 years ago
it was realflight g3.5 i should be getting it for x-mas im not sure.. it was at the hobby shop so i had a limit on time
motoxmaniac93 4 years ago
I run clearView and it work well-- I just had to do some tweeking--
jpbeck01 4 years ago
this is not my first time flying a helicopter my first one was a venom night ranger 2
redice2009 4 years ago
Mebe u should get a sim....
helicub81 4 years ago
yea i crash my tuesday trying to fly at night i broke a blade grip and mess up one of my main blades
redice2009 4 years ago
i this bought my axe a week ago and it came in this monday so am this geting use to it
redice2009 4 years ago
did you had idle up switch on?
redice2009 4 years ago
yea i had it up u could hear the rpms go down kinda i dont no if that was the pich of the blade changing or what but once i get the new main gear in and new servo i will try it again soon... a lil higher this time
ill prob go to the hobby shop tooo to get the swash leveled and stuff so i dont mess it up..
thanks for the comment
motoxmaniac93 4 years ago
and i just got a new lipo 1300mah 3cell lipo battery which would speed the head up more which i will prob use for more stability :) gona prob need a new tail motor.. ive been looking at the new freestyle hobby belt tail rotor. i may get that
motoxmaniac93 4 years ago