You are a hell of a target with a black rifle. Never knew a military sniper with a black rifle. But yes regular military cannot pain their weapons, as you can see I was not regular Army.
I'm a little amazed at half of the people commenting on here about the PMAG. "It cost way more than GI mags", "You'll be able to fire your sand-filled PMAG a couple times before it blows up in your face", etc. I think that it is safe to assume that most of these guys have never fired an AR or M-4 and probably never will. Your gun will be fine, as will you, if your mag jams due to sand. Nobody's ever died from a failure-to-feed, and a I get my PMAGs new for $12/ea. Definitely not expensive.
@RavenZ27 While the failure to feed won't directly injure or kill you, the fact that your weapon isn't shooting when you need it to might be a slight problem if your target is shooting back..
@Cosmo1093 Agreed. A Failure To Feed is certainly detrimental in any combat environment, but a GI mag is more likely to fail under this and almost any circumstance, over a Pmag.
If someone was to say that they preferred GI mags because they didn't like the feel of polymer mags, I can accept that, but to try to say that there are legitimate functional shortcomings in Pmags over Alum or Alloy mags, is just making stuff up.
@RavenZ27 Well the only functional shortcoming of the PMag that I can think of is that its dimensions don't allow it to just drop free from certain AR receivers...I have that problem with my LWRC and the Marines have that problem with their M27 IAR's (HK416's). Installing Magpul anti-tilt followers in USGI mags is a good way to have cheap but highly functional mags.
@Cosmo1093 Yes, Magpul's anti-tilt followers are a great upgrade to GI mags, and many suppliers are selling their GI mags with them already installed. That is something that I would do to any GI mags that I had, along with stainless mag springs.
The Pmag, however, isn't a STANAG mag, which is why the 416, and I would venture your LWRC, don't like them. Magpul's Emag is their STANAG mag that works well with the 416 as well as any non-standard AR variant. Emags are pricey though.
@videofreakmanic123 haha. very funny. and Simons, is spelled s-i-m-o-n-s like the name Simon but with the "s". Not Simmons like that fitness instructor. And btw, its "you ARE a stress test" not "you IS a stress test"
We live in a country where we have politicians wasting trillions on bailing out companies that should have failed. wasting hundreds of billions per year on social programs for other countries just to keep our foreign bases. Wasting Millions on pet projects with no purpose. Yet people are going to complain when a guy who spends his own money and wastes $70 max on ruining some magazines because his paycheck comes from taxpayers? He worked for it, he can spend it how he wants. Stop being idiots.
why is running over magazines even a a test? if your shit is getting run over your in the wrong. throwing them on the floor would be a more realistic test
isn't the point of those piece of shit steel and alum mags is so you can drop them and forget them and not care? magpuls are more expensive and you're probably going to want to pick them back up after they are empty.
@benmodo - Basic PMags (the non-window variety) retail for about $15/ea in a brick and morter store or gun show. Thats cheaper than the gov't issue mags by a large margin. Best price I've found locally on the gov't mags is about $20. Most of the time, closer to $30. I'd take a PMag any day of the week and twice on Sunday! Only mags I'll buy for my ARs. Now if Magpul would just come out with a PMag for the Mini-14...
Perhaps it would have been better to run the sand-filled mag through an actual rifle? Not firing, just cycling it... Might've worked a bit more realistically than the speedloader.
@GeneralMazaki Thats what I did. The force of hand with a speed loader, is not the same as the buffer force. You can watch my video where I do it. You would think this guy would have thought of that, but idk.
you cannot use a reloader to test if it will feed in a gun. The bolt behind it has more force than your hand. You needed to run it in a real gun like I did in my video.
All of you, this is a review about combat effectiveness of magazines. If you are a liberal and don't support the troops and war, leave now. Do not post your trash comments here, because we don't want to have to pity that the only reason you are alive is because of this man in the video, and many more men and women who fight and die for you. Youtube is not a place to argue and swear an eachother and act like out of control kids.
For the sand test...I'm sure you'd be dead by the time your mag was empty...but then again if you take proper care of the mags while in the pouch then it should be fine.
@FNTZMA11417 They chunk them on the ground by the dozens on missions - they just used 3 to test. They are only like 10-25 dollars a piece retail, and the government gets them cheaper than that, 300 million Americans, so that just cost you 1-4 hundred millionths of a cent.
@FNTZMA11417 use our tax dollars i dont care! your fighting for our country, risking your life for us. the least we could do is give you good mags to make sure your weapon is functioning,
How typical.... Another un-informed youtuber talking shit about a war that our brave service members are fighting to keep our country safe. P-Mags arent government issue. If you would have paid attention, in the beginning he said, "were going to do a test on the government issue 5.56 magazine" The GI Mags are issued by the government and they are shit. P-Mags are made by Magpul and they run between $15-18 and this serviceman paid for his out of his own pocket.
@topher81807 Man you are an ASSHOLE, my grandfathers have served in Korea and NAM. It was a joke, no where in what I said did I bash or say ANYTHING about he Military. I love our country and I only said that has a joke, but you're uptight ass cannot fucking take a joke I see.
Youre right. I cant take a joke about people that put their lives on the line for people like you and me everyday. These guys wake up every morning not knowing if today will be their last day on Earth.... So yeah, I do get offended when anybody jokes about a soldier who I dont know, and who doesnt know me, but is still willing to put their life on the line to keep me safe. Its people like this who inspired me to enlist in the Corps after college this semester....
thats why i love america the pmags runs for around $14 god dam $200 for a standard mag why is australia so strict on there gun laws, the pmag finally met its match it took a beating though
What a waste of mags. If you can find any type of 30 rnd AR mags in Australia they are going for between $200 to $300 each. Even though the only gun we can own that takes them is the Rem 7615p.
Considering the Aus $ is worth 0.92US these guys just destroyed what would be around $800US worth in Australia.
Yeah we could once too. But one nut shot alot of people and you know what politicians do after that. Ban everything on the basis of high emotion. Oh well, at least we're not as worse off as the uk. We can still own handguns and non semi rifles.
What country do you live in? Don't let them (your government) take your rights away. Don't give an inch. Just ask the UK. Hell ask the Aussie's (assuming you aren't one). They were forced to turn in I don't know how many legally owned firearms to be destroyed. Truly tragic. Ok. Rant Over.
Yep I'm an Aussie. It was virtually impossible not to hand over registered firearms. They knew what you had and where it was kept as part of granting a licence. Hand them over or go to jail for 14 yrs per offence. Not enough people were willing to give up their comfy lives and go to civil war just to keep semi auto guns. My fathers gen however didn't have registration and I know alot of guns are still around. 1million sks rifles imported, 400,000 handed in. The rest are still out there somewhere
Alot of Americans tell us Aussies we never should have given a single gun to our government. But why is it they have allowed their own government to regulate full autos?and California? I wish all my support to them to maintain their freedom and maybe even roll back the clock. But I'll bet if their government bans semi autos there will be alot of cacheing going on but no fighting in the streets. People won't trade their comfy lives for guns or else Cali + Jersey would be warzones right now.
Don't get me wrong, I'm not knocking you guys, hell I love you Aussie's. But, I think the reason there was no bloodshed, is that the language in the ban legislation in CA and NJ states a ban on the sale of firearms, not on the possession. I could be wrong, but i think thats how those bans work. But regardless, we were never made to turn in out guns.
And, you can get full auto's in most states, it just takes paperwork, and lot's of it. I'm sorry if I'm a little harsh on the Aussie gun laws, I just don't see the logic of a gun ban in a country where most of the animals can kill you. If you ever decide you want your auto loaders back, all us gun guys down here in Texas would be glad to have you.
@shazdee not necessarily, extreme republicans or gun owners might be pissed off enough to rebel along with our government the way it is right now, with a black president, and they could get help from white supremists, KKK, or other racist groups
Good to see our soldiers testing the actual equipment in actual conditions. This is what I would be doing if I was over there. They should send this video to the included manufacturers. thanks for the great video!
The pricing the military gets is inflated compared to what you could purchase on the civilian side, many times. I had to do some ordering of parts a few times when I was in the Corps and was shocked at how much they were charging us. It appeared that the lowest bidder was still outrageously high.
What a rip off, I saw a video were an US supply airdrop fell into Taliban hands and when the Taliban went over to take the supply's about 80% of the metal magazines had failed to hold up during the landing. I was thinking even if the US troops have captured the supply drop most of those magazines were worthless.
where do you find that info that the stanag mags are $45 each??
Stanag mags are available to the civilian sector for $20 or less for each mag. The equipment issued to military personnel are much less than that since they are made by the lowest bidder.
It was a rough guess, but I know shit like that in Canada gets pretty damn expensive, it's hard as hell to find .223 Rem rounds, since the government contracts get priority. I remember talking to a guy at the local gun shop who told me it's almost not worth it to get an AR-15, since the rounds are so expensive and hard to come by.
Instead of trying to change the m4 series of weapons in the military with a gas piston system, they need to just swap out those magazines and give everyone a pmag.
Very true. I've put the M4 to test and it's a great gun. The only problems I have ever had were magazine related and the PMags solve those problems. MagPul makes some amazing shit.
Us Gonzalez are everywhere. I know some one will come with a rascist joke. About my this statement that I made. However, Magpul is a good product the thing is brass won't say no to Colt because they need a retirement job. Colt I bet you has promised these guys jobs if they keep them in business with the goverment.
yeah dude. that's the way of the world these days. along the same lines, oboma nicked the ceo of GM. he gets 20mil anyways. but if they go bankrupt he may lose just about all of it. huh... now it seems clear why they wouldn't just file chapter 11 and restructure in the first place. maybe I'm wrong but... it doesn't look good. my point is that inudstry has got their hooks in deep w/ the Gov. theirs too much of it. and we've let the Gov get too big.
I don't even have the mags yet. just feeling the market out there. i'll buy a bunch then a year down the road when they are banned i'll sell them. so nows your chance get them now where every you can!!!!!! they will be GONE/BANNED!!
I have a shipment of Magpul Pmags 30 rounders arriving toward the end of February (large order). I am taking pre orders, NO deposit required. Payment will not be required till I have the product and I ship it to you.Credit cards are accepted. Just need quantity of mags wanted, name, phone #, and/or email address and its a first come first serve pre order list. $40 per mag, $5 for shipping.Large purchase discount may be available.tutman2006@gmail.comTuttle Security Services L.L.C.248-361-0024
$40 a mag? What a gip. They are even cheaper than that on gunbroker. You sir are a douche. I bet they aren't even the windowed versions. Just by them on Gunbroker or wait until they show up again (prob sometime around middle of Feb.). Don't buy from this guy people.
This is almost as bad as the standard issue gun oil they supply troops. They know it sucks, but they won't change it for the Militec dry gun oil that has been proven not to attract dirt and other shit you don't want in your gun.
granted the HMMWV run over test is not the end all be all of tests but magazines do get crushed and shot and everything else. check out the video of the PMAG that was shot then still was able to feed rounds. It is a lil more convincing. I have shot regualr mags and Ive shot PMAGS and I wont roll out the gate with anything but a PMAG ever again
FNTZ keep up the good work. I know you boys would love to get rid of the Direct Impengement weapons issued but Hopefully that will be remedied soon. Direct Impengement costs lives, takur ghar, weapons fail and soldiers lives are at stake.Short stroke Piston=Effective
Apply an open flame to the mags with ammo and have the same result with all three.What an idiot. This mag feeds and functions as well as the HK mags so. This test is realistic, not fantasy(open flame). in combat crap like this happens but an open flame not likely. These mags can take rounds and still fit in the weapon cant say that for steel.
Actually, you're the idiot & an excellent pitchman for the company. My comment was directed at the absurdity of the "vehicle" tests. Do they pay you in mags? Realistic tests involve abrasion, impact, and heat as in rapid fire. Those are real world tests. Apply an open flame to all three and the pmag fails that test. So what, it proves nothing just like running over of the mags. If your magazines are run over, you are probably wearing them and dead or it was in the weapon and now it is fubar.
They put out a defective magazine and stood behind the product. Good for them. I'll stick with the tried and true and leave the beta testing to someone else.
If the ACR is as reliable and "runover worthy" as the PMAG then It ought to work just fine. I under stand the rapid fire and I have melted the feed lips of more ORLITE mags than I care to mention(got a refund though). These Mags stand up well to rapid fire and have used them with no melting after 500-600 rds of Full auto fire.
that recall was for units before 6/07 and i have 4 of those. They work perfectly. Go get one and try one out before you bash one of the best firearms company's around
Hey these mags are the best. We did the test with an 1114 up armored truck. These mags take a beating and these are the mags I trust my life with. Besides it's a big deferens an 8,500 lb Chevy and a 12,000 lb up armor truck plus combat load of ammo, computers, radios, navigation, power turret, water, food, gas, and all that heavy secret Squirrel shit.
But... Will it blend?
ELITEWAFFLES9 2 weeks ago
at least they'll still be able to fight after they get run over.
jakedakac 2 weeks ago
what kind of rail do you got on that nice look'en rifle
HASSON454 1 month ago
Why would someone dislike this video?
FJCruiser29 1 month ago
i didn't knew soldiers were allowed to paint their rifles
sniperRobert 2 months ago
@sniperRobert Yep, we sure are.
unloco187 2 months ago
@sniperRobert
You are a hell of a target with a black rifle. Never knew a military sniper with a black rifle. But yes regular military cannot pain their weapons, as you can see I was not regular Army.
FNTZMA11417 2 months ago 3
nice m4
Flammin1000 3 months ago
No the body armor would be very ineffective do to the fact I have seen them shot and it had a hole on each side
TheInnovaBoss 5 months ago
I'm a little amazed at half of the people commenting on here about the PMAG. "It cost way more than GI mags", "You'll be able to fire your sand-filled PMAG a couple times before it blows up in your face", etc. I think that it is safe to assume that most of these guys have never fired an AR or M-4 and probably never will. Your gun will be fine, as will you, if your mag jams due to sand. Nobody's ever died from a failure-to-feed, and a I get my PMAGs new for $12/ea. Definitely not expensive.
RavenZ27 6 months ago 3
@RavenZ27 While the failure to feed won't directly injure or kill you, the fact that your weapon isn't shooting when you need it to might be a slight problem if your target is shooting back..
Cosmo1093 5 months ago
@Cosmo1093 Agreed. A Failure To Feed is certainly detrimental in any combat environment, but a GI mag is more likely to fail under this and almost any circumstance, over a Pmag.
If someone was to say that they preferred GI mags because they didn't like the feel of polymer mags, I can accept that, but to try to say that there are legitimate functional shortcomings in Pmags over Alum or Alloy mags, is just making stuff up.
RavenZ27 5 months ago
@RavenZ27 Well the only functional shortcoming of the PMag that I can think of is that its dimensions don't allow it to just drop free from certain AR receivers...I have that problem with my LWRC and the Marines have that problem with their M27 IAR's (HK416's). Installing Magpul anti-tilt followers in USGI mags is a good way to have cheap but highly functional mags.
Cosmo1093 5 months ago
@Cosmo1093 Yes, Magpul's anti-tilt followers are a great upgrade to GI mags, and many suppliers are selling their GI mags with them already installed. That is something that I would do to any GI mags that I had, along with stainless mag springs.
The Pmag, however, isn't a STANAG mag, which is why the 416, and I would venture your LWRC, don't like them. Magpul's Emag is their STANAG mag that works well with the 416 as well as any non-standard AR variant. Emags are pricey though.
RavenZ27 5 months ago
For the price of 1 H&K mag you can buy 3 PMAGS. 60.00 vs. 18.00...
DobermansRock 8 months ago
christ... what does magpul make pmags out of!?!? maybe we should start making body armor outa it!
vampire847 8 months ago 4
and the russians on the other side of the screen noting down in their notebooks
XxKO3xX 9 months ago
PMAG, Fuck yeah!
Infiltrator667 9 months ago 5
@richardsimons1234 ah who cares about the name. And the bad grammar was part of the joke
videofreakmanic123 9 months ago
How is the Iraqi pussy over there?
MrAppleseed88 9 months ago
@MrAppleseed88 Fucking dusty...
DobermansRock 8 months ago
Humvee: DIE PMAG DIEEE!!!
PMAG: HAHAHAH I LAUGH AT YOUR ATTEMPTS TO HURT ME!!
HUMVEE: WHY WONT YOU DIE!!
PMAG: THIS IS GETTING TIRING...WAKE ME UP WHEN YOU DONE
HUMVEE: GO TO HELL PMAG!! *runs off angrily*
mchief190 10 months ago 22
WHY WOULD YOU WASTE A PMAG?!?!?!?!?!?1
videofreakmanic123 10 months ago
@videofreakmanic123 dude...its a stress test
richardsimons1234 9 months ago
@richardsimons1234 YOU, SIR, IS A "STRESS TEST"
and btw, richard "simons" is spelled 'simmons'
videofreakmanic123 9 months ago
@videofreakmanic123 haha. very funny. and Simons, is spelled s-i-m-o-n-s like the name Simon but with the "s". Not Simmons like that fitness instructor. And btw, its "you ARE a stress test" not "you IS a stress test"
richardsimons1234 9 months ago
hahaha at Pullmag.
nisornt 11 months ago
IRAQI SAND COMES IN FLAVORES :P
yuGolder 11 months ago
nice looking weapon what branch are u in
MrTheVidster 1 year ago
nice looking weapon what branch are u in
@MrTheVidster
was in the US ARMY (Long Range Surveillance Detachment).
FNTZMA11417 3 months ago
@FNTZMA11417 525th or 519th if you dont mind me asking
jbarah05 1 week ago
Put some super glue on the pmag and it will work again...
Derail07 1 year ago
We live in a country where we have politicians wasting trillions on bailing out companies that should have failed. wasting hundreds of billions per year on social programs for other countries just to keep our foreign bases. Wasting Millions on pet projects with no purpose. Yet people are going to complain when a guy who spends his own money and wastes $70 max on ruining some magazines because his paycheck comes from taxpayers? He worked for it, he can spend it how he wants. Stop being idiots.
FallenAquila 1 year ago 19
@FallenAquila especially when your life may depend on your equipment. you need to know what it and yourself can take. Hooahh.
m4huntin 1 year ago
Magpul makes really durable and strong magazines.
dannyoif04 1 year ago
Is there any pre assault weapon ban p mags because I would like one
nycwiseguy91 1 year ago
@nycwiseguy91 yes by magpul
Tier1Pibb 1 year ago
why is running over magazines even a a test? if your shit is getting run over your in the wrong. throwing them on the floor would be a more realistic test
joeratti 1 year ago
@joeratti It's called a stress test for a reason.
LZLandingZone 1 year ago
I am glad I have seven of these. I got five of them with my M&P 15x and never had a problem.
jrome117 1 year ago
Shows you what's durable and what's not. Dumb ass!!! Hahaha
PUNX0311 1 year ago
question in life why would you do that to youre mags? run it over!
dirtyathrun 1 year ago
No they said this is the new pmag by pulmag not pullmag :)
TheIphone4thewin 1 year ago
isn't the point of those piece of shit steel and alum mags is so you can drop them and forget them and not care? magpuls are more expensive and you're probably going to want to pick them back up after they are empty.
benmodo 1 year ago
@benmodo - Basic PMags (the non-window variety) retail for about $15/ea in a brick and morter store or gun show. Thats cheaper than the gov't issue mags by a large margin. Best price I've found locally on the gov't mags is about $20. Most of the time, closer to $30. I'd take a PMag any day of the week and twice on Sunday! Only mags I'll buy for my ARs. Now if Magpul would just come out with a PMag for the Mini-14...
FrontRangeFuzz 1 year ago
did he say "this is the new pmag by pullmag"? lol its magpul!
YouDiddntSeeAnything 1 year ago
Instead of bitching about your shitty tax dollars, ENVY these motherfuckers that are protecting us!
secretpolice 1 year ago
@secretpolice not they are not protecting u guys....they are invading others
fig9ux 1 year ago
@fig9ux going to agree with you. but these guys are just caught up in ultra-rich men's private quest for world control.
they should turn their guns on the elitists of the world.
NoahHoe 1 year ago
nutnfancey should review this.
mindlessprimitive 1 year ago 2
Perhaps it would have been better to run the sand-filled mag through an actual rifle? Not firing, just cycling it... Might've worked a bit more realistically than the speedloader.
GeneralMazaki 1 year ago
@GeneralMazaki Thats what I did. The force of hand with a speed loader, is not the same as the buffer force. You can watch my video where I do it. You would think this guy would have thought of that, but idk.
3mealsaday 1 year ago
Poor pmag!
1990MattC 1 year ago
MAGPUL PMAGS ARE THE BEST FOR LESS THAN 20 EACH
RINGWRAITH1791 1 year ago
im subbing u cause your a veteran and I like the vid
Lucaski34 1 year ago
you cannot use a reloader to test if it will feed in a gun. The bolt behind it has more force than your hand. You needed to run it in a real gun like I did in my video.
3mealsaday 1 year ago
shouldnt have got the mag levels, they are not as tough as the old pmags. The older pmags are a lot stronger and more reliable.
3mealsaday 1 year ago
well if you drop your pmag in the sand at least you can shoot it a few times before it blows up in your face!
imnotgay5555 1 year ago
RIP p mag.....what a shame
money96plyr 1 year ago
Oh no i dropped my pmag, and now a humvee is going to run it over 4 times in the middle of a battle.... very realistic =)
iloveguns007 1 year ago
@iloveguns007 you never know, the driver could be mentally retarded
TheCrazyrogue666 1 year ago
@TheCrazyrogue666 hahahahaha wow
iloveguns007 1 year ago
Damn those mags work wonders. Here in my town they sellin for like 15 dollars a mag of 30. Texas, Austin. I need go buy some.
TheCashistrash 1 year ago
10 pmag cost like $110 included shipping.
Vietboy1st 1 year ago
All of you, this is a review about combat effectiveness of magazines. If you are a liberal and don't support the troops and war, leave now. Do not post your trash comments here, because we don't want to have to pity that the only reason you are alive is because of this man in the video, and many more men and women who fight and die for you. Youtube is not a place to argue and swear an eachother and act like out of control kids.
Coleybears1 1 year ago
looks like im getting all new mags. Pmags
crownvic1776 1 year ago
Thanks to all for your service . Thanks also for the test on your dime with the P-mags. Find fun where you can, and stay safe.. yl
ylism 1 year ago
well if my humvee runs over all of my gi mags ill get some p mags
Sporkinator3 1 year ago
Damn! that was the best real world test I have seen on not only on Pmags but on USGI and those venerable HK 556 mags. Thank you guys!
castanagajt 1 year ago 3
For the sand test...I'm sure you'd be dead by the time your mag was empty...but then again if you take proper care of the mags while in the pouch then it should be fine.
nonamre 1 year ago
awesome vid, this is what i was looking for. stay safe guys! thanks a lot
fluffykittynoodles 2 years ago
This has been flagged as spam show
So this is where our tax money is going to...Guys running over magazines in Iraq........lol
GXPFiend 2 years ago
No not tax money, my pay check!
FNTZMA11417 2 years ago 30
Damn straight that will make him eat his wheaties! Fuckin trolls...
nowthisisstupid 1 year ago
@FNTZMA11417 They chunk them on the ground by the dozens on missions - they just used 3 to test. They are only like 10-25 dollars a piece retail, and the government gets them cheaper than that, 300 million Americans, so that just cost you 1-4 hundred millionths of a cent.
8888Duke8888 1 year ago
@FNTZMA11417 use our tax dollars i dont care! your fighting for our country, risking your life for us. the least we could do is give you good mags to make sure your weapon is functioning,
crownvic1776 1 year ago
So this is where your time is going...saying stupid things on the internet cause your life sucks and you need to make up for it by sounding "funny"..
nonamre 1 year ago
@GXPFiend
STFU I don't see you putting your life on the line for your country.
diderr01 1 year ago
I would but I have a bad disease.
GXPFiend 1 year ago
How typical.... Another un-informed youtuber talking shit about a war that our brave service members are fighting to keep our country safe. P-Mags arent government issue. If you would have paid attention, in the beginning he said, "were going to do a test on the government issue 5.56 magazine" The GI Mags are issued by the government and they are shit. P-Mags are made by Magpul and they run between $15-18 and this serviceman paid for his out of his own pocket.
topher81807 1 year ago 2
@topher81807 Man you are an ASSHOLE, my grandfathers have served in Korea and NAM. It was a joke, no where in what I said did I bash or say ANYTHING about he Military. I love our country and I only said that has a joke, but you're uptight ass cannot fucking take a joke I see.
GXPFiend 1 year ago
Youre right. I cant take a joke about people that put their lives on the line for people like you and me everyday. These guys wake up every morning not knowing if today will be their last day on Earth.... So yeah, I do get offended when anybody jokes about a soldier who I dont know, and who doesnt know me, but is still willing to put their life on the line to keep me safe. Its people like this who inspired me to enlist in the Corps after college this semester....
topher81807 1 year ago
@GXPFiend no you stupid cunt, we buy magpul mags with out own money because the ones our govt issues, SUCKS, like your fucking life!
alexei4323 1 year ago
@alexei4323 Ok asshole. I was simply making a joke, but all you hard asses have to go talking shit like people always do over the internet.
GXPFiend 1 year ago
@GXPFiend Hey, that's called real world testing right there.
rommelAOE 1 year ago
@GXPFiend
PMAGs aren't bought by the government, they're personally bought items.
Regulator1D 1 year ago
thats why i love america the pmags runs for around $14 god dam $200 for a standard mag why is australia so strict on there gun laws, the pmag finally met its match it took a beating though
23ltr90 2 years ago
What a waste of mags. If you can find any type of 30 rnd AR mags in Australia they are going for between $200 to $300 each. Even though the only gun we can own that takes them is the Rem 7615p.
Considering the Aus $ is worth 0.92US these guys just destroyed what would be around $800US worth in Australia.
shazdee 2 years ago
@shazdee lol, i need to smuggle some pmags into ur country,,., they are worth more than gold!
we can get em for around $30, along with plenty of semi automatic firearms than can use them :)
lexmark136 2 years ago
Yeah we could once too. But one nut shot alot of people and you know what politicians do after that. Ban everything on the basis of high emotion. Oh well, at least we're not as worse off as the uk. We can still own handguns and non semi rifles.
shazdee 2 years ago
What country do you live in? Don't let them (your government) take your rights away. Don't give an inch. Just ask the UK. Hell ask the Aussie's (assuming you aren't one). They were forced to turn in I don't know how many legally owned firearms to be destroyed. Truly tragic. Ok. Rant Over.
verderben1 2 years ago
Yep I'm an Aussie. It was virtually impossible not to hand over registered firearms. They knew what you had and where it was kept as part of granting a licence. Hand them over or go to jail for 14 yrs per offence. Not enough people were willing to give up their comfy lives and go to civil war just to keep semi auto guns. My fathers gen however didn't have registration and I know alot of guns are still around. 1million sks rifles imported, 400,000 handed in. The rest are still out there somewhere
shazdee 2 years ago
Alot of Americans tell us Aussies we never should have given a single gun to our government. But why is it they have allowed their own government to regulate full autos?and California? I wish all my support to them to maintain their freedom and maybe even roll back the clock. But I'll bet if their government bans semi autos there will be alot of cacheing going on but no fighting in the streets. People won't trade their comfy lives for guns or else Cali + Jersey would be warzones right now.
shazdee 2 years ago 2
Don't get me wrong, I'm not knocking you guys, hell I love you Aussie's. But, I think the reason there was no bloodshed, is that the language in the ban legislation in CA and NJ states a ban on the sale of firearms, not on the possession. I could be wrong, but i think thats how those bans work. But regardless, we were never made to turn in out guns.
verderben1 2 years ago
And, you can get full auto's in most states, it just takes paperwork, and lot's of it. I'm sorry if I'm a little harsh on the Aussie gun laws, I just don't see the logic of a gun ban in a country where most of the animals can kill you. If you ever decide you want your auto loaders back, all us gun guys down here in Texas would be glad to have you.
verderben1 2 years ago
@shazdee not necessarily, extreme republicans or gun owners might be pissed off enough to rebel along with our government the way it is right now, with a black president, and they could get help from white supremists, KKK, or other racist groups
MaNGLeDSHaDoW 1 year ago
You should never watch mythbusters then.
(They destroy stuff, like cars)
caltake1 2 years ago
P-mag is superior, thanks for the good torture test.
Gabe7g 2 years ago
Good to see our soldiers testing the actual equipment in actual conditions. This is what I would be doing if I was over there. They should send this video to the included manufacturers. thanks for the great video!
osulxa 2 years ago 3
Actually they did! Magpul uses this video as advertising now!
AgentNick42 2 years ago
The pricing the military gets is inflated compared to what you could purchase on the civilian side, many times. I had to do some ordering of parts a few times when I was in the Corps and was shocked at how much they were charging us. It appeared that the lowest bidder was still outrageously high.
vall11z 2 years ago
I just bought the Ruger SR-556 and it came with three 30rd PMAG's, I'm in love!
1largescotsman 2 years ago
I wonder if they got in trouble for destroying government property?
swedishvolvo 2 years ago
Doubtful, the US military pays people to conduct these tests all the time, not to mention those STANAG magazines cost somewhere around $45 a piece.
paddmaddproductions 2 years ago
What a rip off, I saw a video were an US supply airdrop fell into Taliban hands and when the Taliban went over to take the supply's about 80% of the metal magazines had failed to hold up during the landing. I was thinking even if the US troops have captured the supply drop most of those magazines were worthless.
swedishvolvo 2 years ago
where do you find that info that the stanag mags are $45 each??
Stanag mags are available to the civilian sector for $20 or less for each mag. The equipment issued to military personnel are much less than that since they are made by the lowest bidder.
bloodangelusn 2 years ago
It was a rough guess, but I know shit like that in Canada gets pretty damn expensive, it's hard as hell to find .223 Rem rounds, since the government contracts get priority. I remember talking to a guy at the local gun shop who told me it's almost not worth it to get an AR-15, since the rounds are so expensive and hard to come by.
paddmaddproductions 2 years ago
Comment removed
dOnKeYpUbEs 2 years ago
those poor cannucks! lol
dOnKeYpUbEs 2 years ago
Those HK mags cost a pretty penny. What do you expect from HK? :\
TheDoxy 2 years ago
Lol. My favorite line: "Bummer."
usafwings09 2 years ago
LMAO when dude said "That's probably enough dude."
Monsterdave23 2 years ago
This comment has received too many negative votes show
i prefer 20 rnd p-mags because hey are lighter!
mrfrankincense 2 years ago
This is why I love Magpul.
paddmaddproductions 2 years ago 12
You need to try the dirt test in an actual weapon. It might just be that speedloaders aren't really designed for ejecting.
GeneralMazaki 2 years ago
"hi were here in Iraq" lol wat an intro
Oxstayne 2 years ago 6
Instead of trying to change the m4 series of weapons in the military with a gas piston system, they need to just swap out those magazines and give everyone a pmag.
DaOneAndOnly3 2 years ago 3
Very true. I've put the M4 to test and it's a great gun. The only problems I have ever had were magazine related and the PMags solve those problems. MagPul makes some amazing shit.
MadelnDade 2 years ago 6
yeah i agree
Oxstayne 2 years ago
H&K do the best guns and magpul do the best accessories!!
Wassim1114 2 years ago
Comment removed
bsmudz 2 years ago
Go magpul!!!
Always makes quality products!
O8SERVER 2 years ago 3
3 Deployments to Iraq and going to Assganastan soon.. I will be taking my 12 Pmags with me. Bravo Beast WHOOAH!!!
crosshairjunky 2 years ago 4
"The new P-mag by Pullmag."
brainfart!
ToobeYoo 2 years ago 36
yeah, but can it fire? and if it can fire what if I poor soda in the mag? will it fire then?
NeedleC 2 years ago
uhh it might, im not sure how that would affect its function, but i know if it didnt then the other 2 probably wouldnt either.
besides, when are you gonna be drinking soda while you are in a firefight?
1cme1 2 years ago
Why the hell would you POUR soda in a mag anyway... This mag will stand up to just about anything you will face in the field..
FFHILLS2008 2 years ago
Us Gonzalez are everywhere. I know some one will come with a rascist joke. About my this statement that I made. However, Magpul is a good product the thing is brass won't say no to Colt because they need a retirement job. Colt I bet you has promised these guys jobs if they keep them in business with the goverment.
audest79 2 years ago
yeah dude. that's the way of the world these days. along the same lines, oboma nicked the ceo of GM. he gets 20mil anyways. but if they go bankrupt he may lose just about all of it. huh... now it seems clear why they wouldn't just file chapter 11 and restructure in the first place. maybe I'm wrong but... it doesn't look good. my point is that inudstry has got their hooks in deep w/ the Gov. theirs too much of it. and we've let the Gov get too big.
orcaluv 2 years ago
agreed we have let govt run rampant..its disgusting..get ready for Pelosi /Obama care..fucking socialists..
crunchyuncle 2 years ago 3
Its good to know if I get run over by a Humvee i can change mags and shot the driver! LOL!
JimTL1000R 2 years ago
Lol the PMag by Pulmag
Epson5000 2 years ago 7
haha! yeah i thought thats what he said!
shaokem 2 years ago
the yugo ak-47 mags are the best mags ever
TMHonfire 3 years ago
WRONG! haha JK!!! you're only a little bit wrong!
shaokem 2 years ago
now run it over w/ a M1 abrams.
diderr01 3 years ago
I've seen them for $15 to $20
teresatenino 3 years ago 3
pulmag? lol
silva652 3 years ago
I don't even have the mags yet. just feeling the market out there. i'll buy a bunch then a year down the road when they are banned i'll sell them. so nows your chance get them now where every you can!!!!!! they will be GONE/BANNED!!
tutman2006 3 years ago
i expected more out of the k&k
NKVDdevaint1 3 years ago
H&K mags is what i meant
NKVDdevaint1 3 years ago
This has been flagged as spam show
I have a shipment of Magpul Pmags 30 rounders arriving toward the end of February (large order). I am taking pre orders, NO deposit required. Payment will not be required till I have the product and I ship it to you.Credit cards are accepted. Just need quantity of mags wanted, name, phone #, and/or email address and its a first come first serve pre order list. $40 per mag, $5 for shipping.Large purchase discount may be available.tutman2006@gmail.comTuttle Security Services L.L.C.248-361-0024
tutman2006 3 years ago
$40 a mag? What a gip. They are even cheaper than that on gunbroker. You sir are a douche. I bet they aren't even the windowed versions. Just by them on Gunbroker or wait until they show up again (prob sometime around middle of Feb.). Don't buy from this guy people.
Bryan8780 3 years ago 10
Just goes to show you:
If you make it, our grunts can break it.
mwmalecky 3 years ago 4
Really the Pmags are great but when will you be running over your GI mag?
swedishvolvo 3 years ago
Thanks for the vid. All I have are contract mags, but I'll look into the PMAG
Stay safe fellas.
God Bless you and God bless the Republic
iantmasters 3 years ago
ill keep my free gi mag but ill make sure not to get it ran over
drinkfightandphuck 3 years ago 3
I bought 5 of them before I saw this video. Glad I made a good purchase. Thanks for the vid. Stay safe, guys.
DragunovJ 3 years ago
The lesson here is don't let someone roll over your magazine with a 10,000LB transport vehicle.
WindsorFox 3 years ago 5
is the military providing pmag's now or do you need to buy them on your own for use. does it void any insurance for some reason??
DaOneAndOnly3 3 years ago
No, the military only provides us with contracted mags which aren't that bad. I never had one fail to function when I needed it too.
tspike911 3 years ago
at 1:11 u said Pullmag instead of Magpul heh.
anyways im getting 3 soon =p n hopefully 6 more later on..
pingpong909 3 years ago
test your M4, let Humvee run over it, see what happen
tatsf226 3 years ago
Very good, and about $14-$15 but those things ran out of stock fast!
xycoordinatex 3 years ago
UCMJ article 108. Eh but who cares... this is worth it to show how shitty usgi can be.
Ben762 3 years ago
Those makes are all of a few dollars. If the Army makes a s**tfit out of hit, then they seriously need to look at their budget :D.
USMCommando 3 years ago
if they UCMJ them, whats the worst that can happen....they send them to Iraq! hahahahaha!! those usgi mags sucked balls!
phernic 3 years ago
This is almost as bad as the standard issue gun oil they supply troops. They know it sucks, but they won't change it for the Militec dry gun oil that has been proven not to attract dirt and other shit you don't want in your gun.
antm4n311 3 years ago
At least you know that if you get ran over by a truck, your magazines will be ok lol
Patrioticsoldr 3 years ago
granted the HMMWV run over test is not the end all be all of tests but magazines do get crushed and shot and everything else. check out the video of the PMAG that was shot then still was able to feed rounds. It is a lil more convincing. I have shot regualr mags and Ive shot PMAGS and I wont roll out the gate with anything but a PMAG ever again
nathanboyd46 3 years ago
I better have a p-mag in case I get ran over by a hummer
coltcomphbar 3 years ago 4
Note to self: dont run over my mags with a humvee!
sizemo7 3 years ago
The hummer was ok, just don't pack them full of talcum like dirt.
bighitter42 3 years ago
Nice test I have a few of my own. (video test)
m4tuna 3 years ago
Just ordered one of these mags last week and am waiting for the delivery. If it functions as well as everyone says, I'll order a crap-load of them!
MrTommy001 3 years ago
FNTZ keep up the good work. I know you boys would love to get rid of the Direct Impengement weapons issued but Hopefully that will be remedied soon. Direct Impengement costs lives, takur ghar, weapons fail and soldiers lives are at stake.Short stroke Piston=Effective
m4huntin 3 years ago
USGI mag = pos
HK "high-reliability" mag = expensive pos
USGI with magpul follower = win..
PMAG = WIN!
sureshot649 3 years ago
Dude put about 1/4 pound of sand in the bitch. Steel barely works with anything in it.These function best with dust and dirt.
m4huntin 3 years ago
this video again proves that anything H&K is overpriced.
Obinjess 3 years ago 2
Bought 10 pmags myself... great price, very light, feeds like a winner.
Looks like every other mag maker out there is sweating bullets.
gfreeman556 4 years ago
I have 2 pmags, best mags ever! I wish we would get issued those instead of those crappy ones they give us.
dabrits 4 years ago
Apply an open flame to all three mags and post the video.
daywlker7 4 years ago
Apply an open flame to the mags with ammo and have the same result with all three.What an idiot. This mag feeds and functions as well as the HK mags so. This test is realistic, not fantasy(open flame). in combat crap like this happens but an open flame not likely. These mags can take rounds and still fit in the weapon cant say that for steel.
m4huntin 3 years ago
Actually, you're the idiot & an excellent pitchman for the company. My comment was directed at the absurdity of the "vehicle" tests. Do they pay you in mags? Realistic tests involve abrasion, impact, and heat as in rapid fire. Those are real world tests. Apply an open flame to all three and the pmag fails that test. So what, it proves nothing just like running over of the mags. If your magazines are run over, you are probably wearing them and dead or it was in the weapon and now it is fubar.
daywlker7 3 years ago
They put out a defective magazine and stood behind the product. Good for them. I'll stick with the tried and true and leave the beta testing to someone else.
daywlker7 3 years ago
If the ACR is as reliable and "runover worthy" as the PMAG then It ought to work just fine. I under stand the rapid fire and I have melted the feed lips of more ORLITE mags than I care to mention(got a refund though). These Mags stand up well to rapid fire and have used them with no melting after 500-600 rds of Full auto fire.
m4huntin 3 years ago
that recall was for units before 6/07 and i have 4 of those. They work perfectly. Go get one and try one out before you bash one of the best firearms company's around
BionicSniper 4 years ago
Hey these mags are the best. We did the test with an 1114 up armored truck. These mags take a beating and these are the mags I trust my life with. Besides it's a big deferens an 8,500 lb Chevy and a 12,000 lb up armor truck plus combat load of ammo, computers, radios, navigation, power turret, water, food, gas, and all that heavy secret Squirrel shit.
FNTZMA11417 4 years ago