ok please help i made this and loaded a walking program but everytime it walks the back just falls off the nxt computer?????? has anyone else had this problem??
@nairblizard Im building mine and i have gone over my parts (Because im at the part putting the NXT Brick on) Make sure the connectors are connected and secure and your not missing any parts if that dowsnt work make sure that any part is weak.
this lego mindstorm is a rip off bad advertising on the front you see alpha rex 2.0 and on one side it says its 38 cm long so when the buyer sees it there going to think you can make it but when i opened it the manual wasn't there then when i opened the flap thing on the front of the box it says the parts that comes with it but i searched online for a manual and when i was making it i didn't even have nearly enough parts i only made the one with the tank looking one
@samhicks97 ok next time, dont buy it used or from a con artist. when you buy the kit new, you will always have 100% of the pieces/manuals, but when you buy it used you dont have that guarantee.
I bought the NXT 2.0 kit (new - not used) in december 2011 (Part no. 8547) and I couldn't find the manuel in the box either. BUT I found out that the manuals for the Alpha Rex and the other machines is on the included DVD. Install the DVD and run the NXT program. On the right you can select what to build, and see the instructions on screen! :)
you will not see it you need the programig software there youll seee humanoids click it after then click alpha rex then do what the instruction tells you what to do
@ventus365 They are on the software disk. When you load the software on the right hand side there is a menu thing and you can get directions for any of the 4 robots.
@playah97 I would run the motors at 75, but It depends on how fast you want the robot to walk. Going too fast (like 100) could make it go out of control.
And, for the pressure sensors, I would put it on pressure (bumped). However, during my experience with this robot I've figured out that the touch/pressure sensors don't acutally help the robot "precision walk" as the box says. Not using them does not make a difference.
@Jordyy12345 Ok, Alls you have to do is make sure one foot is in front of the other, then just have motors b and c go forward at the same time at about 75 power and the robot should walk straight. I have tried using the touch sensors for "precision walking" like the box says, but I've found that there is no difference.
can u please post the software download?
az452111 6 hours ago
Thank god for the mute button.
tntexplosivesltd 3 weeks ago
Shareware songname
MrStillerKiller 1 month ago
This has been flagged as spam show
guys i have an lego mindstorm nxt for sale on ebay. contact on youtube for details.
halopro9995 1 month ago
Seeme like AR 2.0 can certainly walk better than its predecessor.
sklefenz 1 month ago
wat song?
coolbuddywin 1 month ago
@coolbuddywin Read the comments at the top
kalzorath 1 month ago
nice video(could you send the music to my email?)
MyAmmar1997 2 months ago
I wish I could afford this sooooo much.
attapi0 2 months ago
Do you need the resource kit to built the Alfa rex beacuse i have the 9797 only please respond
master1999100 2 months ago
@Transformerworld Yes
Soccergirly9100 2 months ago
@nairblizard Where the batteries go ?
Soccergirly9100 2 months ago
how long did it take tob uild it
Soccergirly9100 2 months ago
im not sure which is better robogator or shooter
supersonic579 2 months ago
Why didn't you use the color sensor in the hand?
AWSOMEDUDE1369 2 months ago
AWFUL MUSIC.
Tocinator 2 months ago
i made the model and programmed it correctly but it wont move or do anything when i run the program.
crash979797 2 months ago
@crash979797 you probably dont have the cords into the right spots
yankeeskid62 2 months ago
@yankeeskid62 trust me i do
crash979797 2 months ago
ok please help i made this and loaded a walking program but everytime it walks the back just falls off the nxt computer?????? has anyone else had this problem??
nairblizard 2 months ago
@nairblizard Im building mine and i have gone over my parts (Because im at the part putting the NXT Brick on) Make sure the connectors are connected and secure and your not missing any parts if that dowsnt work make sure that any part is weak.
CANADIANUL1 2 months ago
@2mitchmitch And i have a 2.0 kit and I have all the pieces and I built Alpha Rex fine.
2mitchmitch 2 months ago
@samhicks You probably bought a used one and the instructions are on the program on the CD that comes with the kit.
2mitchmitch 2 months ago
this lego mindstorm is a rip off bad advertising on the front you see alpha rex 2.0 and on one side it says its 38 cm long so when the buyer sees it there going to think you can make it but when i opened it the manual wasn't there then when i opened the flap thing on the front of the box it says the parts that comes with it but i searched online for a manual and when i was making it i didn't even have nearly enough parts i only made the one with the tank looking one
samhicks97 2 months ago
@samhicks97 ok next time, dont buy it used or from a con artist. when you buy the kit new, you will always have 100% of the pieces/manuals, but when you buy it used you dont have that guarantee.
chrisrocks575 2 months ago 5
@samhicks97
The box comes with a disk software.
Once you install it, it has instructions in the program
spawnerify 2 months ago
@samhicks97 hey ahole its in the NXT Mindstorm 2.0 program CD
Zaner745 2 months ago
@samhicks97 You have to put the disc in the computer and the instructions will be in the program on the computer.
jlsl95 2 months ago
@samhicks97
I bought the NXT 2.0 kit (new - not used) in december 2011 (Part no. 8547) and I couldn't find the manuel in the box either. BUT I found out that the manuals for the Alpha Rex and the other machines is on the included DVD. Install the DVD and run the NXT program. On the right you can select what to build, and see the instructions on screen! :)
Hope this helps!
/Malte
cr8rdk 2 months ago
@samhicks97 which version of the nxt did u buy because with the 2.0 8547 i was able to builld the whole thing.
MsLsd5 1 month ago
@samhicks97 hey the instructions are on the program itself!!
nicholasljy123 3 weeks ago
can you give me a download for the program
boom7413 2 months ago
I want this kit soo bad....
legofans452 2 months ago
did you just make it stop by waving your hand
courtneypolidori 3 months ago
@courtneypolidori yes i did
chrisrocks575 3 months ago
@courtneypolidori by i ultra sonic sensor
zman62001 3 weeks ago
now that was creepy the laught so scary
TheCheckersdude 3 months ago
wow! I love Lego Mindstorms.
TheBasketball022 4 months ago
can you donloud your on music
Transformerworld 4 months ago
can you tell mee the songs name
ciprian380 4 months ago
@ciprian380 Replay by Iyaz
chrisrocks575 4 months ago
@chrisrocks575 THANK YOU FOR SONG
eunicejetiad 2 weeks ago
wow that must of took ages!
LegoFan203 4 months ago
you will not see it you need the programig software there youll seee humanoids click it after then click alpha rex then do what the instruction tells you what to do
MultiGlenn10 4 months ago
This has been flagged as spam show
HEY GUYS WATCH THIS watch?v=0ALyUy1yTn8 !!!
GhostOfTheNight3600 4 months ago
Comment removed
meilute03 5 months ago
I Wan't But It's To Much Money :(
CollinOverKill 5 months ago
epic rex 2.0
MrBackflack 5 months ago
it will be better with wheels .....
legoking90 5 months ago
Have a nice day!!! XD
Guthix151 6 months ago
@ventus365 It's on the cd
freuderle 6 months ago
Love the song =D!!!
MrWhagWha 7 months ago
Im only liking cuz of the music,
sschinychin 8 months ago
i just bought nxt 2.0 but i can't find alpha rex builing instructions inside it? where can i find them?
ventus365 10 months ago
@ventus365 They are on the software disk. When you load the software on the right hand side there is a menu thing and you can get directions for any of the 4 robots.
chrisrocks575 10 months ago 5
@chrisrocks575 I see! Thank you :D
ventus365 10 months ago
@playah97 I would run the motors at 75, but It depends on how fast you want the robot to walk. Going too fast (like 100) could make it go out of control.
And, for the pressure sensors, I would put it on pressure (bumped). However, during my experience with this robot I've figured out that the touch/pressure sensors don't acutally help the robot "precision walk" as the box says. Not using them does not make a difference.
Hope this helps :)
chrisrocks575 11 months ago
Alpha Rex 2.0... Wouldnt that be Beta Rex?
YouBeTrolling1337 11 months ago
Can you use the nxt 2.0 to build the nxt 1.0 alpha rex?
Imperialscout2 1 year ago
@Imperialscout2 no, I don't think so
chrisrocks575 1 year ago
@Jordyy12345 Ok, Alls you have to do is make sure one foot is in front of the other, then just have motors b and c go forward at the same time at about 75 power and the robot should walk straight. I have tried using the touch sensors for "precision walking" like the box says, but I've found that there is no difference.
Hope this helps.
chrisrocks575 1 year ago
sweet
rollercoasterdude121 2 years ago