Added: 2 years ago
From: dualexhaust2500
Views: 34,725
Sort by time | Sort by thread (beta)

Link to this comment:

Share to:

All Comments (43)

Sign In or Sign Up now to post a comment!
  • Sharp truck

  • Sweet truck.. but it needs to be lifted!

  • this is my dream truck

  • I think this would be the only newer chevy or gmc i would buy...im a ford guy, but these are cool, a 496 gas v8 that is stock is just bad ass.

  • greenpeace hates you

    cheers

  • nice looking and sounding teeruk!

  • If you do get headers go for the LONGTUBES not shorty headers. good luck.

  • headers+exhaust? watcha got? and any performance parts? intake programmer SC?

  • sounds good man

  • Not bad at all. Sounds like a big block.

    Now all you need is a cam that will give you 5500RPM to play with, instead of the 4500 it sounds like you're getting

  • now thats a hell of a truck. big block gasser 3/4 ton. im glad chevy was still makin real trucks in 01

  • 06cummings92.....yep, your about right. a nice, boring leisurely cruise on the highway i can get like 11-12....but allowing it to have some freedom, i average around 9...haha. thanks for the comments

  • If it's anything like my 02 8100 he prolly just burnt 10 gallons of gas hahaha

  • @06cummins92 yea i got one but 4 door, short bed, and 4.10 gears i get 10 mpg towing and 12 on the hwy

  • nice looking truck and sounds mint

  • how can an 8.1L only develop 350HP my friend has a nissan 350z that gets that from a 3.5L V6.

  • It's a truck dude, it's more about torque than HP... And what 350z comes stock with 350hp? GTFO

  • @syncmaster710n14 First of all the 350z only came with a max of 300 hp and second this moter has 450 foot pounds of torque. Dose your friends datsun have that?

  • @pj5454302 450s a bit of an overstatement its only about 420 and thats only if you have the 4.10 if you have the 3.73 rear end its only like 360 or so so your better off going with the vortec 6.0 if you get 3.73 gears

  • @GMCownsall is the 420 tq number factory? is it RWTQ or CRANK TQ? and then doesnt the 6.0 produce diffrent numbers with 373 vs 410 and another thing wouldnt the 8.1 w/ a 373 still be faster than a 6.0 with a 373

  • That sounds awesome!

  • sounds good!

  • Sweet Vid, ive got an 01' Extended Cab 8.1 4x4. There's nothing like an American Big Block!

  • no i haven't.....would be interesting to see what it has.....i'm guessing 340hp...not too sure cuz its stock rating is 330hp, but i have aftermarket exhaust.

  • I bet with some engine tuning, and some performance parts, or updates, it easily can reach the 500 HP mark .. and if you put good performance parts on it, it'd probably also be better on gas..

    Because the new GM VortecMAX gets 367BHP ( and also gets 19mpg) out off 6 Liters of engine size, so this one can reach 500 easily...

  • thx for the info...i'll look into it :)

  • @dualexhaust2500 Yea a Tuned 8.1 can easily do 500HP, but who wants Horsepower, its all about what the Torque Meter reads and these things are Torque Beasts, with the right tuning and computer programing(LQ motors are twins to the LS's, so you have lots of programing stuff out there) can easily surpass 600 TQ.

  • @dualexhaust2500 Also, GM has always had a habit of Fudging the numbers some, so, it may be more than you think!

  • @dualexhaust2500 should be right around the 340 hp range, I have an '02 2500HD, ext. short box, run Magnaflow high flow cats & 18" glass packs, duals of course, and threw on a Hypertech Hypertune, and according to that, i'm putting 342 hp. to the ground, but, it's from the box, so lol, might not be as accurate as I think it is.

  • @HeeHoff496 so 342 HP isnt that what the stock number is said to be around 340? so then whats a stock 6.0 at?

  • @GMCownsall right around the 300 range. but, in '04 or '05 they dropped the hp down to 330 for emissions. the 6.0 stayed the same I believe until they switched body styles in '07. And there's an absolute110% I could be wrong too on how long the 6.0 stayed around the 300 range for the 3/4 & 1 tons. I know in the half tons they bumped them up to around 345ish?(VortecMAX & Denali's) lol I'll be square with you, i'm going off the top of my head from what I can & can't remember after '03.

  • @GMCownsall The older 6.0s like 99-02 were about the same horsepower and like 360 tq i think after that they bumped it to like 360hp and 380tq for the 6.0 so those would be like 03-2012

  • thanks for all the comments-

    *esmooth-no lift or susp....tires are cooper discoverer STT (285/75/16)

    gas mileage...what's that? lol. on a good day, around 10-11, but ave is 8 haha.

    *fataqatar-it's a JBA 3" cat-back dual exhaust stainless steel system which includes 2 turbo mufflers. part # 40-3030

  • have u ever dynoed it?

  • Nice truck

  • is this truck lifted at all? Body? Suspension? What size tires running?

  • Nelson tune it, what a difference!

  • lol guess i just got lucky bein able to pull 16 on the highway

  • 8mpg? haha my 364 gets like 10 i can only imagine

  • ah the balls out 8.1, sweet sound

  • lol tierod wants everyone to slap on nitrous... and im actually listening to him :/

  • Hmmm...... Looks like it could use nitrous!!

  • what muffler you have

Loading...
Alert icon
0 / 00Unsaved Playlist Return to active list
    1. Your queue is empty. Add videos to your queue using this button:
      or sign in to load a different list.
    Loading...Loading...Saving...
    • Clear all videos from this list
    • Learn more