the think is the further you go with the power to more is lost. Same principle with steam engines, the power source (the boiler) has massive energy out put but only a fraction of that power gets used because the power lessens the more gears it has to spin.
To skilo: magnetic engines produce kinetic energy but they have to have an external power source to produce the power.
@Gzus70 I will master cocksucker, In fact may i have your personal email address so that i may run everything i want to say by you first for your approval before i say it?
Or perhaps your phone number that way i can call you and ask your permission to say whats on my mind?
@skilo1983 - this is an electric motor. Have you been living in a cave? There are cars powered by electric motors now...of course they cost more than gas powered cars....LOL.
@skilo1983 - say what? A motor powered by electricity is an "electric motor". A magnetic field created by electricity is called an "electromagnet". There is no such thing as an electromagnetic motor. Bad use of terminology.
There are no magnetic motor powered cars, but there are several powered by electric motors.
@skilo1983 - "magnet engines" are not used to power anything for one reason. They produce no power. It is a myth that it is possible to make an engine that works by magnets alone.
@skilo1983 - you don't seem to get it. A magnet engine doesn't turn at all. They don't self start or keep spinning when spun by hand, so there is no output to drive anything. A working magnetic motor is a myth.
I would like to give you 3 suggestions. 1- by changing the rotations of wires in rotor try to make elecromagnets power very close to permanent magnets power. (The reason is if you put 1 very week magnet next to a strong one, they absorb eachother, even if both have same polarity). 2- by shortening the main rod in the middle of rotor you will reduce the resonance and therefore the motor wil rotate faster and smoother and 3- make it thiner to reduce friction. Good luck.
this is cool im trying to build some thing similar myself but without the current ...im also trying to convert magnetic energy in to a current... look up magnetic current some guy named edd? figured out how to do it
I made one of these in the seventh grade. I made one for the neighbor kid for the science fair and used a 14 volt drill battery and it really kicked some @ $ S.
Hey do this, trust me I Did it and it works. Attach the wires to a electric drill battery recharger and then plug that baby in the wall. Pretty Sweet.
i went down to my local power plant and rerouted the electrical grid to get more power, combined with 200 lbs of neodynium magnets i was able to create a black hole the size of a softball...
it sucked my dog in, poor thing, totally worth it though
we used copper wire with a battery and som weed so the video would get stonde so it would think it really works and some nerds to tell stuff what was verry cool and uhh that was it thx for watching my vid and ... uhh bye
it s probably a copper coil which is being fed electricty through the rod running through the middle. It s attached to what looks like a metal tub feeding energy from a battery out of the picture. The two pieces of copper wire complete the circut on either side of the metal tub. It couple probably run alot faster if he used ball bearings.
What's with all the idiots thinking this is some sort of free energy crock 'o shit? Nowhere does it claim to be... at all... it's a simple motor, guys.
Disconnect the battery. Will the "motor" produce the same amount of HP? How many amps are initially used to start the motor? What is the turn over ratio? And person who asked do permanent magnets have the same poles as non-permanent mags have...the answer is yes.
what is generated, should have showed the electric being generated!! also is it friction a good thing? looks to me it would wear itsself out eventually with friction. people explain your theories!!
Brings back memories of the 7th grade at Kirk Jr. High School. We made the same style motor using copper wire and wooden sewing tread bobbin. Thanks for posting.
you could make a AC motor buy just supplying straight AC into the coil instead of using the brushes switch the current direction. It would be a task but possible
nice workmanship. outstanding example of a 2 pole permanant magnet motor.
MechanicalFinger 2 months ago
the think is the further you go with the power to more is lost. Same principle with steam engines, the power source (the boiler) has massive energy out put but only a fraction of that power gets used because the power lessens the more gears it has to spin.
To skilo: magnetic engines produce kinetic energy but they have to have an external power source to produce the power.
asteeves911 3 months ago
This has been flagged as spam show
If you want to get the Magnetic-Generator plans
Just search Google for "Top Magnetic Generator"
Click the First result (Skip the Advertisements) TopMagneticGenerator(dot)Com
I found it to be a great resource
FlowersAll 4 months ago
nice small presentation. Just right!
crudeoilsystems 5 months ago
Why cant we build something like this on a larger scale and out it in a car?
Then we can stop burning all this exspensive gas.
skilo1983 5 months ago
@skilo1983 because it's massively inefficient, you should try to do some research before making retarded statements
Gzus70 5 months ago
@Gzus70 I will master cocksucker, In fact may i have your personal email address so that i may run everything i want to say by you first for your approval before i say it?
Or perhaps your phone number that way i can call you and ask your permission to say whats on my mind?
skilo1983 5 months ago
@skilo1983 - this is an electric motor. Have you been living in a cave? There are cars powered by electric motors now...of course they cost more than gas powered cars....LOL.
LiamXaoh 3 months ago
@LiamXaoh No. that is an Electro-MAGNET-motor.
Name one car that is powerd by a magnet motor.
skilo1983 3 months ago
@skilo1983 - say what? A motor powered by electricity is an "electric motor". A magnetic field created by electricity is called an "electromagnet". There is no such thing as an electromagnetic motor. Bad use of terminology.
There are no magnetic motor powered cars, but there are several powered by electric motors.
LiamXaoh 3 months ago
@LiamXaoh I know that, Thats what i said.
Of course everyone knows their are electric cars, Golf carts have been around for years before anyone thought of making a car electric.
What im saying is why have we not built a magnet engine and put it in a car?
skilo1983 3 months ago
@skilo1983 - "magnet engines" are not used to power anything for one reason. They produce no power. It is a myth that it is possible to make an engine that works by magnets alone.
LiamXaoh 3 months ago
@LiamXaoh I think it's possbile, If the magnet engine is spinning a rod wich could turn a wheel and generate electricity then why not?
skilo1983 3 months ago
@skilo1983 - you don't seem to get it. A magnet engine doesn't turn at all. They don't self start or keep spinning when spun by hand, so there is no output to drive anything. A working magnetic motor is a myth.
LiamXaoh 3 months ago
This has been flagged as spam show
___ w w w diymagneticmotor com has FREE energy stuff maybe it help to someone...
formulax3techie 5 months ago
how much time needs it to start ?
gekkeabt 6 months ago
I would like to give you 3 suggestions. 1- by changing the rotations of wires in rotor try to make elecromagnets power very close to permanent magnets power. (The reason is if you put 1 very week magnet next to a strong one, they absorb eachother, even if both have same polarity). 2- by shortening the main rod in the middle of rotor you will reduce the resonance and therefore the motor wil rotate faster and smoother and 3- make it thiner to reduce friction. Good luck.
vartatoosh 9 months ago
Single phase motor?
1971SuperLead 10 months ago
Hey let me kno if it's reliable to power atleast a battery charger. ;)
darktreason 11 months ago
this is cool im trying to build some thing similar myself but without the current ...im also trying to convert magnetic energy in to a current... look up magnetic current some guy named edd? figured out how to do it
BadRick951 1 year ago
what is da size of that base???
101Frankenstein 1 year ago
Ha ha!
Very neet
How does it work?
MyMetalmaniac666 1 year ago
Send instructions on how to do this please
GREAT1707 1 year ago
There are No free energy blue prints they're bogus don't give yur money to hucksters
WELLGURU 1 year ago
I made one of these in the seventh grade. I made one for the neighbor kid for the science fair and used a 14 volt drill battery and it really kicked some @ $ S.
shartne 1 year ago
This has been flagged as spam show
The big bad Oil corporations r trying their best to stop free energy ideas from spreading to common ppl.
We need to put an end to this corruption ,start generating ur own electricity now.
Visit LT-MAGNET-MOTORdotCOM and get the blueprints . Join the Revolution!!
rebelliouseoagj 1 year ago
This has been flagged as spam show
Free Energy is real and its here! The Oil companies r doing everything they can to stop this
information. If you want a Free energy magnet motor , get the blueprints at LT-MAGNET-MOTORdotCOM , Join the
revolution!
cadentavaricegrtrj 1 year ago
Cool! Are how many revolutions per minute?
TheFilipeGuedes 1 year ago
plzzzzzzz tell me in detailed how did u made it plzzzzzzzzzzzzzz
i need to make my project plzzzzzzzz
poojabayana 1 year ago
This is how any non-brushless electric motor works.
GarrettBMXes 1 year ago
nice dude im going to use your model for my school proyect too
stupidCIAagent 1 year ago
Hey do this, trust me I Did it and it works. Attach the wires to a electric drill battery recharger and then plug that baby in the wall. Pretty Sweet.
JackSoban 1 year ago
That's the easy part. Now make the magnets generate the electricity. ;)
Soboredwtf 1 year ago
How did you connect the coil to the commutator? What is your commutator made out of? This looks pretty cool.
Hikabunny 1 year ago
how do u connect the coil to the commutator?
apatel769769 1 year ago
kinda weak compared to mine,
i went down to my local power plant and rerouted the electrical grid to get more power, combined with 200 lbs of neodynium magnets i was able to create a black hole the size of a softball...
it sucked my dog in, poor thing, totally worth it though
WaitItGetsBetter 1 year ago 94
@WaitItGetsBetter nice!
crazyFLkid 1 year ago
@WaitItGetsBetter
best story I've seen in these youtube comments thus far.. ! lol
lffm07 1 year ago
@WaitItGetsBetter you can go to prison for life now. highly illegal
tacotisco904 8 months ago
@WaitItGetsBetter the best joke so far
CariagaXIII 4 months ago
@WaitItGetsBetter
200 lbs of neodymium . wow, buddy. That's hardcore ...
dusteroo 2 months ago
I'm having trouble wrapping my coil... can anyone help me?
dagame81790 1 year ago
Now tap the energy to recharge the battery. But I doubt you are following the posts here some 4 years later.
JamesRoneyMusic 1 year ago
cool:P
im making one now too and its not going tooo well hehe:S
Billapink 2 years ago
weak my shit goes 10x faster
quakers101 2 years ago
Hi man, can you help me with this project? can you tell me that material used and the conecctions of battery?.
Thanks
PUNKLASTA1 2 years ago
we used copper wire with a battery and som weed so the video would get stonde so it would think it really works and some nerds to tell stuff what was verry cool and uhh that was it thx for watching my vid and ... uhh bye
aminokad 2 years ago
This has been flagged as spam show
I built my own Magnetic Generator which I am currently using to power all my kitchen appliances using the plans at:
magniwork-review.blogspot(DOT)com
taraff1 2 years ago
dude i have the same ceramic magnets
hellkid94 2 years ago
whats the thing thats spinning
ForestManProductions 2 years ago
roast chicken.
Copimi 2 years ago 5
idiot! it's a chicken wing
rebbole 2 years ago
it s probably a copper coil which is being fed electricty through the rod running through the middle. It s attached to what looks like a metal tub feeding energy from a battery out of the picture. The two pieces of copper wire complete the circut on either side of the metal tub. It couple probably run alot faster if he used ball bearings.
Looseball777 2 years ago
a pig on a roasting stick!
nially69 2 years ago
its a custom made wire spool
norman333 2 years ago
can u describe how u make this?
futurepredator8 2 years ago
nice model...
kohensanzo 2 years ago
interesting
specularlobster 2 years ago
What's with all the idiots thinking this is some sort of free energy crock 'o shit? Nowhere does it claim to be... at all... it's a simple motor, guys.
MrZeus7 2 years ago
cool
complexmetal 2 years ago 3
wow its freakin fast. awesome
hardstyle905 2 years ago
Первый автомобиль на таком двигателе сделал Тесла. Он не требовал подзарядки и ехал со скоростью 150 км/час.
pplrity 2 years ago
howed you get the sucker to book it so fast?
IronSaucer 2 years ago
uuh i remember those i think i made one when i was around 8 or 9 years old :D.
shadowshian 3 years ago
This has been flagged as spam show
Damn, people are really retarded. THIS IS JUST THE EFFN MOTOR USED IN FANS, RC CARS, ETC.
vicentevergel 3 years ago
Jesus you guys are retarted. This is only a simple electromagnetic motor. Not another free energy scam.
annextreasures 3 years ago 2
Disconnect the battery. Will the "motor" produce the same amount of HP? How many amps are initially used to start the motor? What is the turn over ratio? And person who asked do permanent magnets have the same poles as non-permanent mags have...the answer is yes.
neverlogoff 3 years ago
the black thing spinning is a piece of copper?
elmeister4evayoknow 3 years ago
anyone know what the name of the actual motor is or the inventor i gotta write a paper on it :( having trouble finding that info to research it.
Gingeralerocks 3 years ago
what is generated, should have showed the electric being generated!! also is it friction a good thing? looks to me it would wear itsself out eventually with friction. people explain your theories!!
kindredspirit76 3 years ago
do electromagnets have north and south poles just like a normal magnet
thecoolbrian 3 years ago
I want to make my own, how can u build one?
SkyGuardian2007 3 years ago
look at the video, dont be a dumbass
MAGNETS + electromagnetic pulse motor
sspoke 3 years ago
Brings back memories of the 7th grade at Kirk Jr. High School. We made the same style motor using copper wire and wooden sewing tread bobbin. Thanks for posting.
EOGGasman 3 years ago
This comment has received too many negative votes show
this can be a replacement for fossil fuels x}
theDyrectawr 3 years ago
stop the motor and explain it please.................
i am waiting for your respose.
ISMAILGUL997 4 years ago
Yes. All you need to make it work without batteries is a bit of anti matter and some common sense.
montereyjak 4 years ago 38
Lol...
brianrulez 4 years ago
This has been flagged as spam show
Hey dude, trust me! i thought i try that site, to see if i can really get some action and it works! its free join today > FLING-CHAT dot COM
J25872461
trentvideos 4 years ago
anyway to make it work without batteries?
MindChamber001 4 years ago
yeah use solour panels
Jeeves2100 4 years ago
yeah thats very simple but fun to make none the less it can kill some time if you need to
girzim21 4 years ago
NIce presentation
sz42781 4 years ago
you could make a AC motor buy just supplying straight AC into the coil instead of using the brushes switch the current direction. It would be a task but possible
kc7bv2gi 4 years ago
what grade they were on?man i cant believe that its a project or smt....so easy for magination of it
mousavi007 5 years ago
I saw cables hooked to it.Was it powering something?
maxibunny 5 years ago
LOL, the cables were powering the electromagnet of course. DC motors are to simple. I want to see someone make an AC motor.
gt4awd 4 years ago
aww a cute hobby motor
bestamerica 5 years ago
Nice job. I built one out of a coil of wire, a pencil, strong neodymium magnets and cardboard one day... just so say I could do it.
1MadHacker1 5 years ago