***Warning*** Engine and Transmission World ***Warning***
Engine and Transmission World is a criminal enterprise. Google "Engine and Transmission World Reviews, Scam, Fraud" and see for yourself. If you are looking for a used motor or transmission EATW is the last place you would want to buy from. They are crooks; they advertise their parts as clean low mile ready to install but they ship out useless junk that isn't even good for a rebuild. If you buy from them you will be ripped off. Beware!
If you can do it you can save save some time by just cutting a patch pane and spot welding it in from the new quarter but I guess they couldn't because of the damage to the rear.
@Cptntasty ya but these stupid repro guys dont know how to stamp shit to the right dimensions so your probley better off stealing donor stuff. plus this is only a ford so who cares lol
good info i own a 92 civic si hatch im restoring that needs a quarter panel ..im goin to be doing it myself and im a noob at body work (gotta start somewhere) so even though im an import guy this vid deffinately helped..thanks!
@sciontcdude- Invest in a spot welder if you can. It will save you a lot of time. Also check out some of the new panel bonding adheisives on the maket today. Civics have relatively smaller panels & ahesive would work well. good luck with your EG!
hey man. If you know of any body work tips for a 72 chevy blazer please pass them my way. i need to replace my back side panel, but i have no idea on how. i have most parts and basic materials..info and mechanicks background, but new to wedling n stuff. thanks
ha ha. i am restoring a 1964 ford galaxie, and believe me, they were not impervious to rust. in fact, this car has turned into an absolute nightmare. BUT, i have not given up yet! seriously. i would say, the first thing you shoud do before restoring a vehicle, is get a tetanus shot.
@aaronjam99 i agree! i think old cars should come with a at home tetanus shot kit! i took 12 stitches in my forarm from a rusted fender with one hell of a sharp edge on it that in didn't know was there till to late!
This has been flagged as spam show
***Warning*** Engine and Transmission World ***Warning***
Engine and Transmission World is a criminal enterprise. Google "Engine and Transmission World Reviews, Scam, Fraud" and see for yourself. If you are looking for a used motor or transmission EATW is the last place you would want to buy from. They are crooks; they advertise their parts as clean low mile ready to install but they ship out useless junk that isn't even good for a rebuild. If you buy from them you will be ripped off. Beware!
rite4lyf 1 month ago
Awsome video
5BobbyDavis 1 month ago
sharp sheet metal and bare hands... THATS HOW WE DO IT AROUND HERR
holyroller7 2 months ago
at 7:18 what was he spraying on?
austinwall1 3 months ago
@austinwall1 looks like rattle can filler primer
h88auto 2 days ago
is that joe bonnamassa
SuperKinevil 3 months ago
This kid has got to be going deaf after the air-hammer and no ear-plugs.
natfunk71 7 months ago
If you can do it you can save save some time by just cutting a patch pane and spot welding it in from the new quarter but I guess they couldn't because of the damage to the rear.
cutlass3501 9 months ago
@cutlass3501 Patch panels are often quicker, but we wanted this one to look as if the damage never happened with no visible seams.
V8TV 9 months ago
its actually almost rust free !
Mr420fighter 10 months ago
good good...
SiiLeNt07 11 months ago
one lucky chevelle
volksgreen 11 months ago
good job guys
JacksonStudio 1 year ago
you are lucky in america , replacment panels in england are crap , you are lucky if they are the right shape ,fitting right is a bonus
The1200sportster 1 year ago 2
You Amercians are very lucky to get re-pro panels. Here in Australia we still have to repair the panel or steal one from a doner car.
Good video :)
Cptntasty 1 year ago
@Cptntasty ya but these stupid repro guys dont know how to stamp shit to the right dimensions so your probley better off stealing donor stuff. plus this is only a ford so who cares lol
jerbearthegr8one 1 year ago
good info i own a 92 civic si hatch im restoring that needs a quarter panel ..im goin to be doing it myself and im a noob at body work (gotta start somewhere) so even though im an import guy this vid deffinately helped..thanks!
sciontcdude 1 year ago
@sciontcdude- Invest in a spot welder if you can. It will save you a lot of time. Also check out some of the new panel bonding adheisives on the maket today. Civics have relatively smaller panels & ahesive would work well. good luck with your EG!
Lonewolf3165 1 year ago
nice video! ty
OneMoeAtheist 1 year ago
finally got to see some thing worth watching.
lattakianz 1 year ago 4
Nice Job guys... I can see you guys know what you are doing. Glad to see someone do a job right.
woodbine824 1 year ago
Hey Guys, like everything but maybe you should have the episode numbers on each vid so we can follow each stage better. Cheers.
brettcakes 2 years ago
Nice to see somebody doing qp repair the correct way!
biscayne427 2 years ago 2
This has been flagged as spam show
hey man. If you know of any body work tips for a 72 chevy blazer please pass them my way. i need to replace my back side panel, but i have no idea on how. i have most parts and basic materials..info and mechanicks background, but new to wedling n stuff. thanks
brant8406 2 years ago
Scott needs to wear ear plugs and wear gloves around that sharp metal.I know its like wearing a condom but it's for his protection.
amoswt 2 years ago 3
thanks for the vids. anymore vids on paint guns. need a paint gun how to vidoeo.
PACER2320 2 years ago 2
all that work? i'd just buy a ford ;) lol j/p dont kill me with hate mail.
phrygian360 2 years ago
ha ha. i am restoring a 1964 ford galaxie, and believe me, they were not impervious to rust. in fact, this car has turned into an absolute nightmare. BUT, i have not given up yet! seriously. i would say, the first thing you shoud do before restoring a vehicle, is get a tetanus shot.
aaronjam99 2 years ago 14
@aaronjam99 i agree! i think old cars should come with a at home tetanus shot kit! i took 12 stitches in my forarm from a rusted fender with one hell of a sharp edge on it that in didn't know was there till to late!
derby0001 1 year ago
@derby0001 ouch!
aaronjam99 1 year ago
I usually just reskin it instead of tearing down the whole QP
GODZILLAMANASS 2 years ago
Just use duct tape.
RandallFlaggNY 2 years ago
How much does it cost to replace that panel?
Bigtruck2007 2 years ago 9
@Bigtruck2007 im guessing 5 to 600
bad65stang 1 month ago
that was a really good video!
sanchemb 3 years ago