the only issue i ever had was using different magazines in them, thats about it. find a mag it likes and use it! the mag will wag like a happy dog in some of the rifles but still work fine
i think its funny how people crack on wasr 10 ak's iv owned 3 ar15's and all 3 jammed over and over, one was a dpms one was a bushmaster and the other a friend built for me. the one my friend built for me worked the best but still jammed. I have since got rid of all my ar shit and bout 1 wasr 10 ak47 iv had it for about 2 years and around 3000 rounds down the pipe and the thing has never NOT ONCE jammed, miss fed or fucked up in any way, ever!
i find it funny that everyone give this rifle a bad record when it comes to being accurate. when my father bought a AR .223, (before we got a optical) neither him or i could shot it accuratly at 30 meters with its pep-sights; however when i bought my "AK" with a WASR lower receiver, we hit bottle after bottle at 110 meters with litte effort. of cource i was trained on a SKS and most americans are trained with a AR so it only depends which rifle you were trained on.
actually it's not an AK47, it a semi-auto AKM. there have been no AK47's since 1957 The varient has nothing to do with it, it's just the elimination of the third hole in the receiver. the AKM parts kit was a class III, that had it's receiver removed. the manufacture just tosses the autosear. so it's nothing more or less than a full auto AKM converted to semi-auto by not including all the parts from the original rifle.
@Bubblehealer The funny part is people think these are manufactured all new rifles, rather than converted rifles. if people knew that, they might look at their rifle in a new light knowning that the rifle they shot and enjoy had likely been used to kill someone. makes you think about it if you never knew..... Thanks for Watching
@Bubblehealer "ak-47" is the generic "umbrella term" us in the shooting world refer to any ak variant as. we don't actually mean a full auto milled receiver ak-47. its usually a stamped, semi auto only ak variant from a number of countries,. its just so much easier than stating specific models, ex: "arsenal sgl21/31 wasr 10, zastava m70b1. see what i mean?
there imported as part kits & put together by drunken chimps at CAI (no quality control) you could get lucky or get screwed - all depends on who built the rifle. the same goes for any parts kit rifle by CAI like the CETME. but if you have no clue what to look for when evaluating a firearm, you dont need an assualt rifle
@svbummin I know I do not need an assualt rifle thank god I did not buy an assualt rifle they are expensive and you fill out alot of paper work. thanks for watching.
If I were to buy a WASR 10 63 at a gunshow, how much should I expect to pay? I see a ton online for around $450 shipped, but I'd also need to pay the transfer fee from a shop and all that. Would be be cheaper to buy online or in person? I'm looking at one as a cheap, reliable first rifle to get into shooting with.
...an AK is an AK, true, just purchased a wasr10, same set up with the k-var(nato) furniture, thought for sec, a wasr 10 compared to a $2000 arsenal, the difference?, for approx $1500 more you get a little better accuracy, milled receiver, and a "showroom" condition "prettier AK" with arsenal, AK's are the same, $400 or $2000, same reliable, powerful, durable, easy to strip weapon, arsenals are fantastic, tho $2000 for an AK??? ...LOVIN' MY WASR!
i like this video, it goes over everything in a very obvious sence. the ak 47 was developed to have military grade accuracy; which means as long as you can hit someone. its accurate.Plus with the magazine wobble, like you said, and then who gives a rats ass.. i have a wasr 10 an i have never had a misfeed and ive put thousands of rounds through mine. again on another note, the canted front sight can be simply hammered out. The wasr is one of my favorite guns and i own 24 different guns.
ive only shot three wasr10's i bought one my friend has one and my other buddy bought one mine iv had for 2 in a half years not one problem ever!!! only some shitty mags thats all my other buddy no problems ever now my other buddies is a different story but it was used and old that could just be the last owner, my ak or wasr10 has shot over 4 thousand rounds my mags really dont have much wobble exept for chinnese metal mags but my polymor mags are great
@LockNReload Are those ATI handguards? How do they work for you? Are they heat resistant, or do they melt or get so hot you cant hold onto the handguards?
i was once told that magazine wobble was intended so we can fit any type of standard ak47 magazines, i remember i had a Inter Ordnance ak47 and had the wobble bad but never interfered with the rifle's duties..Not a single malfunction,rarely i would get one after shooting over 200rd of wolf steel ammo and i dont blame the rifle,that ammo is very dirty.
@wweironman12XBLGT Before they cut out the WASR's mag well, the single stack magazines fit perfectly in the gun. The dimple has no bearing on mag wobble. I have a Saiga .308 without a dimple and there's no mag wobble.
@sovietsks45 Yes I do Recomend them they are high speed low drag. just make sure it is a good to go Rifle. find one with very little mag wobble or with non canted front sight and good over all function as well. I would rely my life on that AK-47 AN AK is an AK is an AK enough said. thaks for watching.
@sovietsks45 Yes I do Recomend them they are high speed low drag. just make sure it is a good to go Rifle. find one with very little mag wobble or with non canted front sight and good over all function as well. I would rely my life on that AK-47 AN AK is an AK is an AK enough said. thanks for watching.
I have a wasr and i just shot it today and it shot flawlessly when i was actually trying to aim rite i had like half inch grouping I'n center of mass and this was at 50 yards will trying at 200 before too long. But it's An amazing rifle love it! Fun to shoot i was thinking of buying an arsy cause of all the reviews I've seen and everyone says something about it and after shooting it i don't want one :) shoot safe and have fun
Mine works well,shoots anything I feed it. I did polish the feed ramp before I shot it the first time.No canted sights, no issues at all. Took it to the range and it hit dead center and within two inches of it tiime after time. Yes, there are more expensive AK's but I wanted to spend the least amount on one. Just check it out before you buy it (Look it over). Heck I would do that with anything I bought, car,gun,boat or even a hooker.
i jus bought my wasr 10 and i havent shot it yet i pick it up 2marrow but i dnt have anyproblems yet i mean asenal is saying that the s.n dnt match all of mine match the reciver the cover under the iron sitghts the bolt they all match no canted front sights or barrels no wobble on the gas block a lil wobble in the mag, like u said thats all good its from were they milled it out for the double stacked mags my only thing is havnt shot it so i dk if mine will jam on hollow tips (cai)W.A.S.R10
@LockNReload I have a WASR-10 and it had only one problem, but it's fixed now! It has a side folding stock, which I love!:) Makes it unique, like me!:) Separates it from others.
my personal preference is the polish m60. i like it cuz it has a milled reciver. but it doesnt have a chromed barrel. thats what i really like about the wasr. and very few aks have that feature. wasr or arsenal is all i know that do. my question is... and i have yet to find the asnwer... is a wasr as accurate as an arsenal. if so then ill get 2 wasrs instead of 1 arsenal.
every wasr i ever had worked 100%
the only issue i ever had was using different magazines in them, thats about it. find a mag it likes and use it! the mag will wag like a happy dog in some of the rifles but still work fine
DracoC47 13 hours ago
i think its funny how people crack on wasr 10 ak's iv owned 3 ar15's and all 3 jammed over and over, one was a dpms one was a bushmaster and the other a friend built for me. the one my friend built for me worked the best but still jammed. I have since got rid of all my ar shit and bout 1 wasr 10 ak47 iv had it for about 2 years and around 3000 rounds down the pipe and the thing has never NOT ONCE jammed, miss fed or fucked up in any way, ever!
dagofromchicago 3 weeks ago
if it looks like a duck walks like a duck sounds like a duck acts like a duck its a duck.
ottokis308 1 month ago
i find it funny that everyone give this rifle a bad record when it comes to being accurate. when my father bought a AR .223, (before we got a optical) neither him or i could shot it accuratly at 30 meters with its pep-sights; however when i bought my "AK" with a WASR lower receiver, we hit bottle after bottle at 110 meters with litte effort. of cource i was trained on a SKS and most americans are trained with a AR so it only depends which rifle you were trained on.
agbond003 1 month ago
heard these new wasr 10s are alot better than the older ones. i would like to know more about that.
choopdewoot 1 month ago
AK47 was made from stamped parts and cheap to make. It was designed from the ideas of the German Sturmgewehr 44.
SequelFinalNight 2 months ago
Great video. The WASR-10 is a great rifle. I use mine to shoot wild hog on my land. Thw wasr-10 you can run hard and clean easy.
Thanks,
Scott
ScottHammond 2 months ago
good video
weaponeer 2 months ago
ok not trying to be a dick
a wasr 10 or any civilian AK is not an AK-47
An AK-47 is a class III weapon and very hard to obtain not to mention the cost of $8000+
This is not an AK-47 it is just an AK variant
Bubblehealer 2 months ago
actually it's not an AK47, it a semi-auto AKM. there have been no AK47's since 1957 The varient has nothing to do with it, it's just the elimination of the third hole in the receiver. the AKM parts kit was a class III, that had it's receiver removed. the manufacture just tosses the autosear. so it's nothing more or less than a full auto AKM converted to semi-auto by not including all the parts from the original rifle.
LockNReload 2 months ago 2
@Bubblehealer The funny part is people think these are manufactured all new rifles, rather than converted rifles. if people knew that, they might look at their rifle in a new light knowning that the rifle they shot and enjoy had likely been used to kill someone. makes you think about it if you never knew..... Thanks for Watching
LockNReload 2 months ago 2
@Bubblehealer "ak-47" is the generic "umbrella term" us in the shooting world refer to any ak variant as. we don't actually mean a full auto milled receiver ak-47. its usually a stamped, semi auto only ak variant from a number of countries,. its just so much easier than stating specific models, ex: "arsenal sgl21/31 wasr 10, zastava m70b1. see what i mean?
567WORMBOY123 1 week ago
there imported as part kits & put together by drunken chimps at CAI (no quality control) you could get lucky or get screwed - all depends on who built the rifle. the same goes for any parts kit rifle by CAI like the CETME. but if you have no clue what to look for when evaluating a firearm, you dont need an assualt rifle
svbummin 2 months ago
@svbummin I know I do not need an assualt rifle thank god I did not buy an assualt rifle they are expensive and you fill out alot of paper work. thanks for watching.
LockNReload 2 months ago
you hit a lot of good points, i got a romanian doublestack
keep makin vids
ar15proof 3 months ago
If I were to buy a WASR 10 63 at a gunshow, how much should I expect to pay? I see a ton online for around $450 shipped, but I'd also need to pay the transfer fee from a shop and all that. Would be be cheaper to buy online or in person? I'm looking at one as a cheap, reliable first rifle to get into shooting with.
galamonkey 3 months ago
@galamonkey I'm not sure where you're at but dunhams sporting goods has them cheap they are all over the midwest.
DanielJosephTV 3 months ago
...an AK is an AK, true, just purchased a wasr10, same set up with the k-var(nato) furniture, thought for sec, a wasr 10 compared to a $2000 arsenal, the difference?, for approx $1500 more you get a little better accuracy, milled receiver, and a "showroom" condition "prettier AK" with arsenal, AK's are the same, $400 or $2000, same reliable, powerful, durable, easy to strip weapon, arsenals are fantastic, tho $2000 for an AK??? ...LOVIN' MY WASR!
ridemytube247 4 months ago
GOOD AK! JUST GOT ONE AND ITS GREAT! JUST HAVE TO KNOW WHAT TOO LOOK FOR WHEN YOU ARE BUYING ONE...
AND DONT PLAY WITH YOUR GUNS WHEN YOURE HIGH!!! PLZ...
oksanaostapyuk 4 months ago
i like this video, it goes over everything in a very obvious sence. the ak 47 was developed to have military grade accuracy; which means as long as you can hit someone. its accurate.Plus with the magazine wobble, like you said, and then who gives a rats ass.. i have a wasr 10 an i have never had a misfeed and ive put thousands of rounds through mine. again on another note, the canted front sight can be simply hammered out. The wasr is one of my favorite guns and i own 24 different guns.
thebjv1992 4 months ago
ive only shot three wasr10's i bought one my friend has one and my other buddy bought one mine iv had for 2 in a half years not one problem ever!!! only some shitty mags thats all my other buddy no problems ever now my other buddies is a different story but it was used and old that could just be the last owner, my ak or wasr10 has shot over 4 thousand rounds my mags really dont have much wobble exept for chinnese metal mags but my polymor mags are great
ak47yawhy 5 months ago
@LockNReload Are those ATI handguards? How do they work for you? Are they heat resistant, or do they melt or get so hot you cant hold onto the handguards?
10781618 6 months ago
i was once told that magazine wobble was intended so we can fit any type of standard ak47 magazines, i remember i had a Inter Ordnance ak47 and had the wobble bad but never interfered with the rifle's duties..Not a single malfunction,rarely i would get one after shooting over 200rd of wolf steel ammo and i dont blame the rifle,that ammo is very dirty.
reynosamanA3 6 months ago
wasr is fine ak. i dont have any of the problems others have,
driftzsan 7 months ago
Mag wobble kinda depends on if your AK has the demles on the side or the magazine that you are using.
wweironman12XBLGT 7 months ago
@wweironman12XBLGT Before they cut out the WASR's mag well, the single stack magazines fit perfectly in the gun. The dimple has no bearing on mag wobble. I have a Saiga .308 without a dimple and there's no mag wobble.
esh325 6 months ago
fist person that dosent repeat every thing they hear about wasrs its dumb i wanna get one so do you recomend it
sovietsks45 8 months ago
@sovietsks45 Yes I do Recomend them they are high speed low drag. just make sure it is a good to go Rifle. find one with very little mag wobble or with non canted front sight and good over all function as well. I would rely my life on that AK-47 AN AK is an AK is an AK enough said. thaks for watching.
LockNReload 8 months ago
@sovietsks45 Yes I do Recomend them they are high speed low drag. just make sure it is a good to go Rifle. find one with very little mag wobble or with non canted front sight and good over all function as well. I would rely my life on that AK-47 AN AK is an AK is an AK enough said. thanks for watching.
LockNReload 8 months ago
I have prolly put 1000 rounds through my WASR-10 and had ZERO issues, best deal on AK-47's out there by far!!
bmacAK47 9 months ago
I have a wasr and i just shot it today and it shot flawlessly when i was actually trying to aim rite i had like half inch grouping I'n center of mass and this was at 50 yards will trying at 200 before too long. But it's An amazing rifle love it! Fun to shoot i was thinking of buying an arsy cause of all the reviews I've seen and everyone says something about it and after shooting it i don't want one :) shoot safe and have fun
FiresprayXL 9 months ago
Mine works well,shoots anything I feed it. I did polish the feed ramp before I shot it the first time.No canted sights, no issues at all. Took it to the range and it hit dead center and within two inches of it tiime after time. Yes, there are more expensive AK's but I wanted to spend the least amount on one. Just check it out before you buy it (Look it over). Heck I would do that with anything I bought, car,gun,boat or even a hooker.
FredFlintStoneRox 9 months ago
i jus bought my wasr 10 and i havent shot it yet i pick it up 2marrow but i dnt have anyproblems yet i mean asenal is saying that the s.n dnt match all of mine match the reciver the cover under the iron sitghts the bolt they all match no canted front sights or barrels no wobble on the gas block a lil wobble in the mag, like u said thats all good its from were they milled it out for the double stacked mags my only thing is havnt shot it so i dk if mine will jam on hollow tips (cai)W.A.S.R10
MultiTapout18 10 months ago
@MultiTapout18 my mags wobble a little too but it feed hollow point just fine. keep in mind mag wobble only occurs on an empty mag not a loaded one.
LockNReload 10 months ago
@LockNReload I have a WASR-10 and it had only one problem, but it's fixed now! It has a side folding stock, which I love!:) Makes it unique, like me!:) Separates it from others.
bigmanwithagun12 3 months ago
my personal preference is the polish m60. i like it cuz it has a milled reciver. but it doesnt have a chromed barrel. thats what i really like about the wasr. and very few aks have that feature. wasr or arsenal is all i know that do. my question is... and i have yet to find the asnwer... is a wasr as accurate as an arsenal. if so then ill get 2 wasrs instead of 1 arsenal.
dp665 11 months ago
I've owned so many AK's, and a lot of times I can't tell the difference in how an expensive AK shoots and a WASR.
esh325 1 year ago 2
@esh325 lol
semiautoriflelover 1 year ago
i have a wasr. check out the polishing job i did to the bolt and bolt carrier. i gave it a touch of class.
djgrooveline 1 year ago