RC Day: Hangar-9 Twist 60 fuselage replacement and new ESC problems

[flyingchimp99]

I've got the twist 40, and i cans ai the weakest parts is the joint from the end of the plane to the middle and the join from the front of the plane to the middle. I added a generous amount of epoxy to prevent a breakage. And im doing fine considering I've got WAY more vibration than you since im running a glow power system.

[Gabi1Geolog]

plane or helicopter man? :p

[BankheadRC]

hey where did you get the UBEC from and what brand. Thanks

[hairlesshippy]

@BankheadRC I think it was from tower hobbies .. I think its castle. Thanks!!

[purepurebliss]

I see where you say you do not have another ESC, if you have another motor try that first and verify the ESC with another good motor if you have another.

Hope this helps.

[hairlesshippy]

Your not a day late. I uploaded yesterday but made public just a couple hours ago. I wish they would show the date added as the day/time I made public.. Anyway, I don't have another ESC to test it with.. That would be the best test!! Thanks for commenting!!

[purepurebliss]

hairlesshippy, good day. I know I am a day late posting this, but what I have found to be true a lot of times is that the wires may be bad on the motor so I normally re-solder mine. Next I would verify the motor is good by using another known good ESC, then I would verify the ESC. Let me know if this helps.