Is this mega cam solid or hydraulic flat tappet? This bitch sounds wicked THe Edelbrock heads are very good man I have a friend that has a 70 Nova with a 406 sbc with the Victor Jr heads,11.1 compression,full roller motor, powerglide tranny with 9in rear with 31x21.5x15 slicks 4.86 gears The car runs in the mid 8's in the quarter mile that is freakin fast for an all steel car! No nos or any other power adder just a 950hp holley on top of a Dart port matched intake!
i cant have the adrenalin rush that your friend reaches when he finishes the 1/4 mile, but when people hear the sounds of the engine turn around to see the car
Fukin sweet ride man, my first car was a 79 impala. I had a built 355 with vortec heads. my drivetrain was th350 3000 stall with 3.73s auburn posi traction unit stuffed in a 8.5 inch 10 bolt. Dam miss that car man!
Yes this is definately true this is one of the first (really the only until now) thing i did to my caprice and listen to the sound it makes on my page
thats probably because its so heavy its own weight pulls it down the road. its like driving a very fast lead brick lol. i used to have one. my buddys caprice beat corvettes.and hotshot mustang and ricer owners. but it had almost 500hp
i hope the owner of the black 93 z-28 4th generation camaro can see your comment. I reach and won this camaro just in a long uphill highway. This time my engine was new with edelbrock performer cylinder heads and i have more than 400 hp
haha ya it also destroys camaros. it stays in first gear up to 60 mph then it shifts into second then from there we burry the speedometer. the speedometer finally broke. we dont know exactly how fast it was. never topped it out. his buddy drove next to him in his suped up LS1 camaro and clocked him at about 140 and the caprice was still pulling ahead. the camaro didnt have anythin left. he backed off and never went that fast again. the carb is a holly 850 cfm double pumper.
Very nice, check my Caprice out if you get a chance
TheYoshiClan 1 year ago
yeah cherry bombs 4ever
maccam59 2 years ago
cool but i like glasspacks better
maccam59 2 years ago
thats what i have on mine, only glass packs.
1985capriceclassic 2 years ago
Is this mega cam solid or hydraulic flat tappet? This bitch sounds wicked THe Edelbrock heads are very good man I have a friend that has a 70 Nova with a 406 sbc with the Victor Jr heads,11.1 compression,full roller motor, powerglide tranny with 9in rear with 31x21.5x15 slicks 4.86 gears The car runs in the mid 8's in the quarter mile that is freakin fast for an all steel car! No nos or any other power adder just a 950hp holley on top of a Dart port matched intake!
BluegrassRules1973 2 years ago
the mega cam is hydraulic flat tapped.
i cant have the adrenalin rush that your friend reaches when he finishes the 1/4 mile, but when people hear the sounds of the engine turn around to see the car
gius29 2 years ago
@BluegrassRules1973 lol. 8's with an all steel car and only 950hp and no turbo, nos, or blower, sorry dude, thats impossible.
speedy650 1 year ago
awesome it sounds like the camaro off of 2fast 2furios
1966caprice 3 years ago
sounds awesome to i can tell it got that high end power
Whatthefuckisgoingon 3 years ago
if i put flowmaster on my stock/base caprice would that just be retarded? or would it actually make it sound deeper?
MarioLoco03 3 years ago
your car is going to sound deeper and with more torque and HP, and if you car is stock i spend my money first in exhaust and later in other ads
gius29 3 years ago
Fukin sweet ride man, my first car was a 79 impala. I had a built 355 with vortec heads. my drivetrain was th350 3000 stall with 3.73s auburn posi traction unit stuffed in a 8.5 inch 10 bolt. Dam miss that car man!
lozantus82 3 years ago
My fukin ex talked me into selling it, keep her man and dont do the same mistake of selling her
lozantus82 3 years ago
If you'd really like to have the roar, just not all the time, Have a set of electric cutouts put on right after the headers.
mikeb1444 3 years ago
Yes this is definately true this is one of the first (really the only until now) thing i did to my caprice and listen to the sound it makes on my page
Whatthefuckisgoingon 3 years ago
wat engine u got in ur caprice?
BLACKSTEEL26 4 years ago
350 GM Goodwrench
gius29 4 years ago
i got a three fifty but it has no balls but its older and the original any ideas to beef it up only 94,xxx on it
Hurtinthem 3 years ago
wow ALMOST FALL OF MY CHAIR! Great scream baby wow!!! :D
devaneizanardi 4 years ago
Nice Car!!!!
todav8 4 years ago
got the 1985 Caprice and its stock i need u 2 pimp it for me. lol u check my video u will find it there i make some wheels spin lol
EXPRE5555555 4 years ago
sweet
tctman9 4 years ago
tiene una falla
estebanp4 4 years ago
totalmente de acuerdo le hicieron el escape pero tienen que revisar el motor
pikero15 4 years ago
Hey buds my 4000 pounds caprice win to camaro's from each generation in street racing, NO NITROUS, NO BLOWER, NO TURBO, ONLY HP
gius29 4 years ago
kind of like all throttle no bottle
porkchop70 4 years ago
I like the wheels, tastefull, I hate over massive rims like 24" etc.
well done on having taste and not being a slave to fashion.
tpvalley 4 years ago 2
thats probably because its so heavy its own weight pulls it down the road. its like driving a very fast lead brick lol. i used to have one. my buddys caprice beat corvettes.and hotshot mustang and ricer owners. but it had almost 500hp
GMCman82 4 years ago
i hope the owner of the black 93 z-28 4th generation camaro can see your comment. I reach and won this camaro just in a long uphill highway. This time my engine was new with edelbrock performer cylinder heads and i have more than 400 hp
gius29 3 years ago
haha ya it also destroys camaros. it stays in first gear up to 60 mph then it shifts into second then from there we burry the speedometer. the speedometer finally broke. we dont know exactly how fast it was. never topped it out. his buddy drove next to him in his suped up LS1 camaro and clocked him at about 140 and the caprice was still pulling ahead. the camaro didnt have anythin left. he backed off and never went that fast again. the carb is a holly 850 cfm double pumper.
GMCman82 3 years ago
Sounds BEUTIFULL!
rushevorc 4 years ago