Hey, I just went flying and I had to reduce the gain to 64% on the DX7 in gyro mode, (50% to 100% gain is 0 to 100% gain for head hold mode). That's not much right? That's only 28% if it's linear between 50-100. How much was yours set at? I just did a day of flying, ended the 4th pack with a crash, I'm gonna post the vid soon, surprisingly little damage.
A little wag, flyerbug's having the same problem with his SE V2, GY401 and 9650 on a 35X 6V BEC. Do you have a problem eliminating the wag even with delay or reduced gain? Both those won't fix it.
You might wanta check a few things, your blades seem to slow down really quick, maybe because the pinion is too tight against the main gear or your tail belt's too tight.
Thanks Linkadrip, yes it is all carbon and CNC. Microheli CNC head and tail. You need to set your ESC to Soft Cut off if you have it. I get about 8 minutes in Governor mode and 3,000 RPM head speed, 2200 Mah lipo 20C.
Very Nice flying JD. Battery last for quite awhile there. I think i have my ESC set wrong when the battery gets to a certain voltage power cuts and i have to auto gyro to the ground luckly i have been fortunate to not damge the heli. but definetly need to take a look at whats happening. Very nice Heli can see you have put some Change into it.
Hey, I just went flying and I had to reduce the gain to 64% on the DX7 in gyro mode, (50% to 100% gain is 0 to 100% gain for head hold mode). That's not much right? That's only 28% if it's linear between 50-100. How much was yours set at? I just did a day of flying, ended the 4th pack with a crash, I'm gonna post the vid soon, surprisingly little damage.
DavidSunshine867 4 years ago
Nice flying, it flys pretty nice.
A little wag, flyerbug's having the same problem with his SE V2, GY401 and 9650 on a 35X 6V BEC. Do you have a problem eliminating the wag even with delay or reduced gain? Both those won't fix it.
You might wanta check a few things, your blades seem to slow down really quick, maybe because the pinion is too tight against the main gear or your tail belt's too tight.
DavidSunshine867 4 years ago
Dave thanks for the comments. I just needed to reduce the gain a little. it slowed down fast because of all the negative pitch in hold mode.
consultjdm 4 years ago
Thanks Chris, talk to you in the forum.
consultjdm 4 years ago
Nice! I like the spool up sound of your t-rex!
Keep it up!
cmavr8 4 years ago
Thanks Linkadrip, yes it is all carbon and CNC. Microheli CNC head and tail. You need to set your ESC to Soft Cut off if you have it. I get about 8 minutes in Governor mode and 3,000 RPM head speed, 2200 Mah lipo 20C.
consultjdm 4 years ago
Very Nice flying JD. Battery last for quite awhile there. I think i have my ESC set wrong when the battery gets to a certain voltage power cuts and i have to auto gyro to the ground luckly i have been fortunate to not damge the heli. but definetly need to take a look at whats happening. Very nice Heli can see you have put some Change into it.
linkadrip 4 years ago