Good evening and HELP... I have a problem with a new item i got from RAP 4 and is the 5oz butt-stock and metal guide. The butt-stock ones assemble is to louse. How can I make the butt-stock pin engage the metal guide better so that the butt-stock stays in place. the way it is know has soon has I put pressure to the butt-stock its slides.
espero que puedan aprobechar todo el potencial que tendra este ingeniosa invencion pero espero que resuelvan sus problemas porque estoy seguro que muchas personas van a querer una de estas
great response video. good too see that they are paying close attention to the community, even pointing out issues they found that reviewers may not have mentioned/noticed.
First of all, I must state, I am amazed and generally VERY impressed with the fact that RAP4 sent out test kits for review with the SOLE PURPOSE of discovering what improvements need to be made before the production models come out. Very Impressed!
Next, I would like to ask for a video showing the base kit for the BT4 (ie: no after market stocks or barrels/shrouds) as that is most likely the marker I will be using for one of these kits. Thanks!
thank you i dont mind the delay as long as your doing it RIGHT infact i wish more companies would do this cuz ya the players like to show off all the new toys but we also like them to work the first time and for that yu get my respect cuz not alot of companies like to admit there prototype mess ups and just tell the consumer to basicly deal with it thank you RAP4
Glad to see you guys taking steps to address issues and put out the best product you can. I applaud you on that. I have to say, that I've always hated that Tippmann went with a dovetail mount from the start because of there being such a lack of accessories that can mount to a dovetail. It makes total sense to keep the dovetail for the reasons you stated. I also believe that the crowd which a magazine feed is being marketed to is the same crowd that is all about the RIS and like me hates the DT.
Good video, better release strategy than any Microsoft product. nice to know your fixing before the official release, not after. Great Work GUYS!! - wudd up Wolf!
Great video, but IMO the dovetail was a bad choice on Tippmann's part. I don't know anyone that would be sad to see it replaced by a full picatinny rail.
good job guys. Break away from any of the bad rep you guys may have had before and prove em wrong!. Regarding the a5 top rail, I think it would be a good idea to keep it as the dovetail, mainly because it IS a conversion kit. People who buy the conversion kit would most likely already have a dovetail - weaver/picitiny rail adapter already so it shouldn't be a problem!
There is a level of excellence we have come to expect from RAP4 and I am sure it will be met when the kits hit the market. To anyone hating on this because of the test kit reveiws...should know that these cats are about excellence in the products they sell and the service they give.
Everyone at CQB Tactical Paintball uses T68 Gen6s, and I know given enough time the conversion kits will be just as reliable and just as deadly.
Personally, I recommend you abandon the design of the clear mag... forever. The new 20 rounders are a thousand times easier to maintain. Getting the string to sit properly in the old style is far too difficult.
@tooootall suprised that you guys even use t68s. haha. thought you guys would of been hardcore milsigs and hate on t68s just like other people would. nothing wrong with milsigs. ive been contemplating on whether to invest or not in one. i know, its a mag fed a5 but more expensive. wonder if this kit will force cost on other mag fed markers to drop just a bit?
As much as I enjoy these videos and seeing the process of how things are being fixed and changed, has Rap4 sent out other kits for testing? In particular I've heard nothing of the X-7 original test kits. I'm sure there are a lot of people out there wondering about the process of the kits other than the A-5 as well.
guys guys guys... I just want to see the BT-4 Kit... any way you could show the different KIT's on a video? Or if anyone has done a review... send me a pm with a link to check it out!
Nice work! I cant wait. But you guys need to do more vids on the 98 also. I have a 98 custom and I want to make sur the 98 is getting as much attention as the A5 is.
Good evening and HELP... I have a problem with a new item i got from RAP 4 and is the 5oz butt-stock and metal guide. The butt-stock ones assemble is to louse. How can I make the butt-stock pin engage the metal guide better so that the butt-stock stays in place. the way it is know has soon has I put pressure to the butt-stock its slides.
eblgraphics 7 months ago
espero que puedan aprobechar todo el potencial que tendra este ingeniosa invencion pero espero que resuelvan sus problemas porque estoy seguro que muchas personas van a querer una de estas
monche123456789 7 months ago
Great follow up.. all our team is looking forward on these kits by July!
pacaermo 7 months ago
Will this kit for the Project Salvo be able to accept the response trigger or just the e grip anyone please respond
DigiTPXer 9 months ago
great response video. good too see that they are paying close attention to the community, even pointing out issues they found that reviewers may not have mentioned/noticed.
arcazxcc 10 months ago
First of all, I must state, I am amazed and generally VERY impressed with the fact that RAP4 sent out test kits for review with the SOLE PURPOSE of discovering what improvements need to be made before the production models come out. Very Impressed!
Next, I would like to ask for a video showing the base kit for the BT4 (ie: no after market stocks or barrels/shrouds) as that is most likely the marker I will be using for one of these kits. Thanks!
MidnightPaintballer 10 months ago
when will the test kits come out for the 98 custom? and can you show more about the 98 custom.
hulkingaustin 11 months ago
thank you i dont mind the delay as long as your doing it RIGHT infact i wish more companies would do this cuz ya the players like to show off all the new toys but we also like them to work the first time and for that yu get my respect cuz not alot of companies like to admit there prototype mess ups and just tell the consumer to basicly deal with it thank you RAP4
tacticalSpot 11 months ago
Comment removed
1surecan 1 year ago
Will the the Tacamo Magazine kit work with First Strike rounds?
Can I use a Tippmann air thru stock with the new internal air system?
Would be create but a small valve on the Cyclone and then switch between the Cyclone on a mag loaded with First Strike rounds.
Boldtaar 1 year ago
@Boldtaar i want to do the same thing and stuff the first strike rounds in the slot for the cyclone single shot
HeatSroken777 1 year ago
So is their any word about these Tacoma d mags I have heard about.
Shane4457 1 year ago
Good work guys!
rap4ukcom 1 year ago
Glad to see you guys taking steps to address issues and put out the best product you can. I applaud you on that. I have to say, that I've always hated that Tippmann went with a dovetail mount from the start because of there being such a lack of accessories that can mount to a dovetail. It makes total sense to keep the dovetail for the reasons you stated. I also believe that the crowd which a magazine feed is being marketed to is the same crowd that is all about the RIS and like me hates the DT.
theeflash 1 year ago
Well done Rap4!
invAZNz 1 year ago
Nice response, guys, that's what we expect from rap4, excellence.
There's just something I haven't quite understood: will the conversion kit bodies be air-thru ready?
PbBaunilhao 1 year ago
Good video, better release strategy than any Microsoft product. nice to know your fixing before the official release, not after. Great Work GUYS!! - wudd up Wolf!
jaibinrob 1 year ago
Great video, but IMO the dovetail was a bad choice on Tippmann's part. I don't know anyone that would be sad to see it replaced by a full picatinny rail.
PastNorwegianBlue 1 year ago
good job guys. Break away from any of the bad rep you guys may have had before and prove em wrong!. Regarding the a5 top rail, I think it would be a good idea to keep it as the dovetail, mainly because it IS a conversion kit. People who buy the conversion kit would most likely already have a dovetail - weaver/picitiny rail adapter already so it shouldn't be a problem!
Infinity942 1 year ago
There is a level of excellence we have come to expect from RAP4 and I am sure it will be met when the kits hit the market. To anyone hating on this because of the test kit reveiws...should know that these cats are about excellence in the products they sell and the service they give.
jazzman3071 1 year ago
Great response to the reviews! Speedy too!
Everyone at CQB Tactical Paintball uses T68 Gen6s, and I know given enough time the conversion kits will be just as reliable and just as deadly.
Personally, I recommend you abandon the design of the clear mag... forever. The new 20 rounders are a thousand times easier to maintain. Getting the string to sit properly in the old style is far too difficult.
Keep up the great work! Too Tall <3s Rap4!
tooootall 1 year ago
@tooootall suprised that you guys even use t68s. haha. thought you guys would of been hardcore milsigs and hate on t68s just like other people would. nothing wrong with milsigs. ive been contemplating on whether to invest or not in one. i know, its a mag fed a5 but more expensive. wonder if this kit will force cost on other mag fed markers to drop just a bit?
azntactical 1 year ago
@azntactical Milsigs kick all kinds of ass, but its so much easier to maintain a T68.
tooootall 1 year ago
fixing all those bugs? thank you rap4! i cant wait for my kit to arrive.
predatorguy07 1 year ago
As much as I enjoy these videos and seeing the process of how things are being fixed and changed, has Rap4 sent out other kits for testing? In particular I've heard nothing of the X-7 original test kits. I'm sure there are a lot of people out there wondering about the process of the kits other than the A-5 as well.
TheCrashworth 1 year ago
What about the markers jamming and having to be recocked? is that being looked at?
SASPaladin 1 year ago
I was considering NOT buying this after Wolf's review, but now that I know that all the problems are being addressed- I'm buying one!
Admlnastrator 1 year ago
guys guys guys... I just want to see the BT-4 Kit... any way you could show the different KIT's on a video? Or if anyone has done a review... send me a pm with a link to check it out!
Great job btw
noshameshane 1 year ago
I wanna see some videos on the 98
russell122784 1 year ago
Nice to hear that you guys have listened to all the reviews and are going to improve your product before it hits the market. Keep up the good work!
1BadZ 1 year ago
It's great that you're getting on these issues as fast as you are.. because as I've said before, there is great potential here.
Yumyumtuna 1 year ago
what about the difference wolf saw in the spacing of where the cyclone innerface is compared to the acctual A-5
icebreaker123456 1 year ago
i love a company that listens to their reviewers.
Now instead of a shit kit with many problems
youre gonna get a quality product
PaintballingTings 1 year ago
You guys should send out another evaluation kit to the first reviewers when you fix the problem.
What about the cocking lever i watched a video and someone showed the lever and it was already broken
TheKrazydreams 1 year ago
i would love to get a hold of a phenom version test kit.
Logan04PB 1 year ago
Were any test-kits sent out for the 98 custom? Good on ya for the quick reply to reviews.
ecnliu 1 year ago 8
@ecnliu the kits for the 98 are not out yet for testing. Only the A5 test kits are out right now.
ModernIntel 1 year ago
will you have any ris hand guards in the hk style?
cheeseeric1 1 year ago
cool your actually fixing things yea
cheeseeric1 1 year ago
Thanks for the update and hard work!
haffordj 1 year ago
Well done on the video guys, I love the effort, and Amazing follow up for your customers!
I am still a fan, keep up the great P.R.
-WOLF
drewolf 1 year ago 36
Very Fast Response Rap 4! You guys have it, just need to Tweak a few things! Can't wait to purchase the BT4 Kit.
Killjoy56 1 year ago
I am glad they take the reviews in stride and try to improve the product. Good Show
reuben360 1 year ago
I am glad they take the reviews in stride and try to improve the product. Good Show
reuben360 1 year ago
You guys have my Number, so let me know if you need anymore testing.
EvilFingers 1 year ago
...and the magazines itself?
natebelike 1 year ago
good job with the quick response! keep us updated on the kits :)
TheChunkysprinkles 1 year ago
Good to see attention to detail, and a willingness to listen to your fans/customers.
The only thing I don't agree with, is I'd rather see a true mil/spec rail on top of the receivers.
Thanks for the vid, and keep up the good work!
k3ndawg7 1 year ago
Nice job guys, glad to see you are taking the test evals seriously and working to correct the issues.
FatGuyPaintball 1 year ago
kewl! Fast response can't wait to see the newer version.
Ryccoon 1 year ago
= D
DenudedNinja 1 year ago
Nice work! I cant wait. But you guys need to do more vids on the 98 also. I have a 98 custom and I want to make sur the 98 is getting as much attention as the A5 is.
JusDizy 1 year ago