'89 Mustang 5.0 Startup, Idle, and Walk Around. (E303 Cam)

[justlm69]

Clean car.....you need to restab that distributor though...its off a tooth...next upgrade...get some headers! lol

[SMSinger91]

I actually like those wheels...

[badazz93coupe]

that car sounds really good man, im running a e cam myself

[TheFlipperboyz]

That car sounds GOOD!!!!

[MrDavidruffin]

oh lord have mercy that thing is beautiful under the hood

[lymantime]

what brand are those street radials? i got a 93 gt and need new rubber for the back.

[MrDavidruffin]

Yeah those are the stock rims ford had an epic fail on those mine HAD the same ones

[mustangguy6501]

trade ya a 87 Mustang LX 2.3 4cyl auto lol very sweet car u got there

[Hollowman110886]

HAHA Daily driver eh? What kind fuel milage you get?

[Camaromandave98]

I might be getting one of these soon, it's a 91 5.0 with a e303 cam, rebuilt engine and exhaust, i was wondering have you had any major problems with the car and would you say it's reliable, thanks.

[spikejones4567]

Nice car! U gotta ditch those wheels tho!

[halflife103]

@spikejones4567 maybe he's going for a sleeper look.

[brace06]

did i see slicks on the back? or just bald tires from you having to much fun haha?

[fateisajester]

@brace06

street radials (cheater slicks)

[brace06]

@fateisajester not bad i was thinking about throwing some drag radials on the back of my fox

[fateisajester]

@brace06

they make a hell of a difference. just dont ever drive on them in the rain. ive put my stang in the median twice just driving in a straight line holding it at 55 mph

[jerryhowell9]

that sounds sooo gooood

[fateisajester]

@jerryhowell9

thanks man :)

[robturner1rob]

I got 89 couple with e303 cam with long tubes, 2 chamber flows, underdrive pullies, with 65mm t body, and 24 pound inject, cold air kit and 373 gear, great sounding car.

[recklesswit2891]

this is a nice mustang. i like it very much; however, I don't understand why you would modify the heads and intake without modifying the the air intake tube. shouldnt you be trying to suck as much cold air in as possible?

[fateisajester]

@recklesswit2891

thats a moroso cai

[strokedmustang66]

That dose sound sexy.

[SoCalJohnston]

That idle is so nice. Good work

[89stanghondaslayer]

How much $ did cost to get those 10 holes polished? They look way better that way you just need to get the centers chromed.

[fateisajester]

@89stanghondaslayer

too much lol. but ive never seen it done before, so ill probably going to be hanging on to them for a while. as for the center caps..... for some reason they didnt polish very nice, so i didnt use them.

[crabpeoples]

keepin it real street o.g. with the 10 hole rims.

[fateisajester]

@crabpeoples

thx i just wish i could get a stock looking fiberglass hood to fit :(

[brsciontc]

Your car sounds sick, just like mine lol good luck with it.

[bigalwillis]

sounds badazz,,,,love the stock look

[candle3k]

is the e303 cam a good street/strip cam? I've seen people use it but no vids and no one ever seems to have feedback about it. I hope to purchase an 87 GT 5.0 5 speed and I wanted to know if this cam is worth getting

[fateisajester]

it sounds pretty good, but i have to admit it is a bit lacking when it comes to performance. you have to remember that this cam was designed decades ago. it USED to be a very good cam, but technology has gotten alot better and alot more research has been done on cams for the 302. do your self a favor and give compcams a call. let them know what you already have, what youre planning on getting, and how you plan on driving most(street or strip). theyll be able to suggest the perfect for your needs

[candle3k]

yeah, I was thinking of giving them a call anyway, but the e303 cam is still mass produced so I figured it had to be something special

[washedupsinger]

Nice, like the 10-holes.  It's perfect sleeper.

[recklesswit2891]

nice motor. sounds pretty tough. it looks stock too, nice.

[jdmhondababy]

Did you use the stock manifold with an aftermarket filter? i want to do that with mine only because taking off the finder is a bitch

[fateisajester]

thats actually a moroso cold air setup. at the time all i had on was the elbow and filter, but a few weeks later i put it through the fender. it wasnt that difficult. you dont have to remove the entire fender, just the tire and then inner finder liner. it took me about 5 mins to do everything

[nandoGdog]

Just remove the silencer and put in a K&N air filter, those cold air set ups are not worth it.

[fateisajester]

@jdmhondababy

thats a stock 93 cobra intake manafold with a moroso cai.

[GoGoggansGo]

@fateisajester wasnt the cobra intake manifold pretty much a trick flow intake with a diffrent cover. A friend of mine had an trick flow intake on his 93 and then took it off and added the cobra intake and he didnt lose anything.

[HOF150]

I am about to install an E 303 in my 5.0 did u advance or retard your cam timing ?

Thanks Tommy

[dreadly101]

Advance ;)

[fateisajester]

mhm... 2 degrees

[suprbird]

so what are you running? i saw an msd dizzy, and im guessing cobra intake? cuz i have a 5.0 lincoln mark vii, id like to get a cam, but right now have stock upper/lower intake, but have a bbk cai on it, bbk shorty headers, into bbk x pipe and flowmaster 40's. my car has 130k miles too, but i want it to sound like yours, cuz yours sounds effin awsome.

[fateisajester]

when that vid was taken, yes, i had the cobra upper and lower among other things. i have completely changed my setup(went carb) and still have the same sound. what makes the sound is the exhaust system i have. Im running bbk equal length shorties, cat delete, custom h-pipe, and magnaflow muffs

[suprbird]

sweet, i want to cam my lincoln but idk if i can with an automatic tranny, id like the b303 but right now cant afford a 5spd swap, its my daily driver and im paying for college so i dont have a ton of money to spare and i have 130k miles, but id like a cobra intake with this cam, new lifters, and a timing chain.

[mirc225]

do you have cats on it?

[fateisajester]

no sir

[nsinhold]

oh very nice..

[fateisajester]

Thank you sir!

[skate4life2206]

thats only a cobra intake the only foxbody mustang cobra was in 93

[fateisajester]

i never claimed to have a cobra. I use a cobra intake for the performance. I dont understand your comment. EVERYONE knows that intake came on 93's... If I were you and was trying to sound smart, I would have commented on the break booster. If you can tell me why, then ill be impressed. Until then, you just sound like a douch bag to me

[skate4life2206]

no people were like nice cobra i was just saying that it was a cobra intake

[mustang50dominates]

Did you have to put an intake spacer for those valve covers? I am looking at getting those exact same pair

[fateisajester]

1.5" spacer

[lllll33lllll]

magnaflows are the shit

[fateisajester]

I agree, lol.

[adiosk8r91]

nice! i got a 89 gt as well i bought it Thanksgiving and havent been able to drive it yet but i work on it almost every day, i'll have it on the road by next week its the best thing i ever owned i will never get rid of it!

[fateisajester]

Post some vids when you can!

[adiosk8r91]

Got it on the road but i got in the the shop for a complete engine rebuild, since it sat for 2 years everything needed to be replaced

[unclenader]

nice work ... jus wanderin if you changed to springs along with the cam

[juztanotherday2]

what do you redline with your ecam? or better yet what do you shift at? and what gear in the rear end? this info would be greatly appreciated thanks..

[fateisajester]

it floats at about 6k.... it has a really strong pull from 4000 5400, but i run it up to about 5900 to shift so that it drops back to 4k.

[313foxbody420]

what is your gears

[Ryistheguy]

what exhaust u runnin?

[FordLIghtningTruCk]

damn!! that's sounds NICe bro..

[raulcane]

nice bro

[veritech102]

WHAT A FUCKING BEAST! I love how it looks stock too, very nice car. I keep telling people Magnaflow's are awesome exhaust if you have a cammed engine, because w/o the cam they tend to be too quiet. You just proved my point.