what is your bike? i own a pulsar 200 and it has a time delay mechanism. i want to install an HID light but all the mechanics in my town says that if they will install the HID, there should be another switch and that it cannot pass to its original switch on turning the headlight on and using the passing switch. pls help.. thanks!
To answer the purpose. On a motorcycle, you turn on the key which turns on the lights, and then you push the start button which will turn off the lights while the engine is starting, then the lights will turn back on. This on and off process is bad for HID bulbs and ballasts so the timer relay will keep the HID's off for a set amount of time until the motorcycle start process is done.
Wow, I forgot about this video. I'm doing a retrofit on my new bike and was looking to see if I listed the info on this relay which obviously I didn't so sorry to those who asked. I just checked out and am going with MrJohnny's advice of the WolstenTech timer relay (Google it).
Hi there, excellent instalation thats what I need a timer relay as my bike as well has lights on permanetly so when i hit the starter lights go off for a few seconds, can you pls let me know what kind of timer relay did u use> and where did you get it from, many thanks!!
Hey bud i too recently installed an HID hit on my 2008 gsxr1000 and im looking for a way to find a power source that only engages the relay only when the bike is running. Only because i heard it wears out the HID bulb if it turns on when on position with the ignition then go to start it for it to turn off and on again. Any help would be helpful.
you should be fine without the relay as long as you let hid's warm up for 5 to 8 sec before starting....
fckied 1 year ago
what is your bike? i own a pulsar 200 and it has a time delay mechanism. i want to install an HID light but all the mechanics in my town says that if they will install the HID, there should be another switch and that it cannot pass to its original switch on turning the headlight on and using the passing switch. pls help.. thanks!
nimo1234 1 year ago
To answer the purpose. On a motorcycle, you turn on the key which turns on the lights, and then you push the start button which will turn off the lights while the engine is starting, then the lights will turn back on. This on and off process is bad for HID bulbs and ballasts so the timer relay will keep the HID's off for a set amount of time until the motorcycle start process is done.
catalyst1074 2 years ago 2
Wow, I forgot about this video. I'm doing a retrofit on my new bike and was looking to see if I listed the info on this relay which obviously I didn't so sorry to those who asked. I just checked out and am going with MrJohnny's advice of the WolstenTech timer relay (Google it).
catalyst1074 2 years ago
What is the purpose to the relay/timer? I understand that it helps with eliminating a battery drain?
600rrScionTc 2 years ago
The WolstenTech time delay relay is also a good way to accomplish this.
MrJohnny42 2 years ago
Do u know the website for this?
smch88 2 years ago
were did you get the timmer relay?
Soaronex 3 years ago
Hi there, excellent instalation thats what I need a timer relay as my bike as well has lights on permanetly so when i hit the starter lights go off for a few seconds, can you pls let me know what kind of timer relay did u use> and where did you get it from, many thanks!!
diegovilla09 3 years ago
I seen plug and play HID's. Is this ok? or do I need a relay harness? The company I called assured me I dont need a Relay Harness.
kendiwolf 3 years ago
plug and play is fine if not better less cluter on a bike, the ballast does all the work as long as they are good
gayrabbit 2 years ago
Hey bud i too recently installed an HID hit on my 2008 gsxr1000 and im looking for a way to find a power source that only engages the relay only when the bike is running. Only because i heard it wears out the HID bulb if it turns on when on position with the ignition then go to start it for it to turn off and on again. Any help would be helpful.
Robertikas 3 years ago
that would be ur ignition or acc....
gayrabbit 2 years ago
was it an easy install?
how much modification was needed?
angrymonkey1979 4 years ago
This has been flagged as spam show
Hey homie, trust me! i thought i try that site, to see if i can really get some action and it works! its free join today > _FLING-CHAT.COM_
N43565295
pontianus 4 years ago
glare ftl.
heresmymind 4 years ago