Just kidding:) The standoff is two pre-cut wooden "stirring things" that you get at gas stations...
They are a bit to spot, but on 0:12 you see to parallell magnets with the size of a wristwatch adjuster. They are attched to the stand off. Btw. the liner may look like it has an U shape, but in fact, it is an L shape:)
Do you recommend using a perpendicular shaped ( L shaped) copper or rounded shape, which is more effective for penetrating from your experience ? and does it make a difference ?
@1stPal I am not perfectly sure on this one, but as the L shape seems to be the most popular, I think there is a rason for that;) Personally, I have not yet been able to vary that much, due to the lack of space:P
@Dornier335A No I didn't melt it, just it pressed to around 1,5-6g/cm^3.
When I look at the pictures of the charge, I get kicked by the fact that the stand-off was too short, it should have been the double. In mm; aprox. 10mm.
@daktriper Grunnen til at jeg fjerna alle videoen var ettersom jeg venta en litt tvilsom forsendelse i posten. Men denne måtte jeg pga tollen returnere, så det burde kompensere for at dem lar meg være i fred;).
Ikke mye erfaring med SC's nei, veit jo i terioen hvordan ting går for seg.
Men smellstoff er _smell_stoff, det er litt vanskelig å smelle for tida, uten at det norske folk hopper i taket, hvis du skjønner:P
Was the ETN/PETN cast or just pressed?
donnelrj01 1 month ago
@donnelrj01 Just pressed :)
Northhunt 1 month ago
@unclefesterscrew1 It's pulverized into to fine dust..
Just kidding:) The standoff is two pre-cut wooden "stirring things" that you get at gas stations...
They are a bit to spot, but on 0:12 you see to parallell magnets with the size of a wristwatch adjuster. They are attched to the stand off. Btw. the liner may look like it has an U shape, but in fact, it is an L shape:)
Northhunt 5 months ago
Dear NorthHunt,
Do you recommend using a perpendicular shaped ( L shaped) copper or rounded shape, which is more effective for penetrating from your experience ? and does it make a difference ?
Thanks, 1stPal
1stPal 5 months ago
@1stPal I am not perfectly sure on this one, but as the L shape seems to be the most popular, I think there is a rason for that;) Personally, I have not yet been able to vary that much, due to the lack of space:P
Northhunt 5 months ago
@1stPal A sharp edge at 60 degrees should penetrate the best. I'm talking from theory here.
As always Northhunt, fantastic work.
dontnubblemebro 5 months ago
I make shape charges otta .410 shells with flash powder
smackthatonekid 5 months ago
Did you melt it to get high density?
How long SO distance did you have?
Dornier335A 5 months ago
@Dornier335A No I didn't melt it, just it pressed to around 1,5-6g/cm^3.
When I look at the pictures of the charge, I get kicked by the fact that the stand-off was too short, it should have been the double. In mm; aprox. 10mm.
Northhunt 5 months ago
Trygt å laste opp nå da? :p
Bra resultat forresten, holdt på mye med retta ladninger?
daktriper 5 months ago
@daktriper Grunnen til at jeg fjerna alle videoen var ettersom jeg venta en litt tvilsom forsendelse i posten. Men denne måtte jeg pga tollen returnere, så det burde kompensere for at dem lar meg være i fred;).
Ikke mye erfaring med SC's nei, veit jo i terioen hvordan ting går for seg.
Men smellstoff er _smell_stoff, det er litt vanskelig å smelle for tida, uten at det norske folk hopper i taket, hvis du skjønner:P
Northhunt 5 months ago
@Northhunt Skjønner godt hva du mener, dumt det er slik nå. Føler at oppmerksomheten er rettet feil vei... Men men, ikke noe å gjøre med det.
daktriper 5 months ago
first
TheFlapAttack 5 months ago
@TheFlapAttack Once again, congreatulations;)
Northhunt 5 months ago