@Manoo62 yes cause a 13b engine code really would apply to 3.9L and if anyones ever of heard of a rotary over 7 litres please lets see a video also how about u acctually find out what your talking about before you try and tell rotary enthusiests how big there engines are
@Manoo62 if the wankel engine couldnt get over 300 hp with a 13b 3.9L it would be a pointless and never used invetion mazda cant even make rotaries over 5 litres so dont try convince ppl on shit you dont even know what your talking about its 1.3L for a 13b
@85VWWesty Well at leased you have spotted why rotary's have gone nowhere in the last 50 years. Why dont you actually do your homework. Google 'Rotary Engine Displacement' the first site that comes up is RX-7.com
@Manoo62 its called sarcasm a 4 litre rotary is inpractical and the rotary engine is very practical in many situations look at the top rated comments if you really want to know the displacement
@Manoo62 did i say that no i said you cant use the same mathematics to compare a rotary to a piston go to any rotray owner or even mazda and say the 13b is 3.9L and not 1.3
@85VWWesty So you have no idea about engineering, no idea about how engines work, no idea about simple geometry, no idea what you are talking about really.....but your still right!?!?!?
Yeh you have made a good case there....that your an idiot.
@Manoo62 cause you saying that a 26b is 8L is me not knowing shit all about engineering, engine works or geometry why dont you look up your facts before not accepting that your wrong and thinking rotarys are crap i wouldnt even be surprised if this is Aji8
@85VWWesty Your obviously a idiot, I have given you a reference on how to measure a rotary's capacity and you still dont understand!?!?!?!....because your a retard. Stop posting shit and go play with your crayons.
Impressive numbers for 1.3L displacement. A very narrow power band however as the graph is very parabolic. I would rather have a consistent 600hp and flat torque curve from 3k rpm on, than a peak of 900hp at redline. That's just my 2 cents :-p
1.3L is the factory 13b, according to what i read, if it's right, it's a 2.0L 20b out of the mazda cosmo, unless it was built using 13b rotor housings.... But i'll take your 2 cents, i agree with you on how i'd personally like my motor set up
thats not a1.3 liter its a 2.0 liter 3 rotor. and i'd rather have 900hp and a 10-11k rpm redline than 600hp and a 7k rpm redline. Thats just my 2 cents.
Heh Heh, i must've been drunk, of course built rotaries can pull past 10k rpm. Its a fuzzy graph but if it puts down over 800hp from 7k on then thats a nice power band. I would still prefer a flatter torque curve for cruisin the streets, but its prolly a monster at the track.
Mazda 787B Engine * Spark plugs: 3 per rotor * Fuel system: Nippon Denso electronic fuel injection * Battery: Pulsar * Maximum Power: 700 hp (520 kW)/9000 rpm * Maximum Torque: 448 ft·lbf (607 N·m)/6500 rpm * Instrumentation and Telemetry System by Pi Research
This comment has received too many negative votesshow
899whp or at the output? It's still not a terribly big feat, since there are turbo IIs running over 650 hp with 2 rotors. This car is using E85, so we can assume it's fuel mixture is tuned pretty aggressively, and still "only" 900? If it's at the wheels, different story though.
its at thewheels horse power thats why its on a rolling road not an engine dyno only engine dyno meters were you take the engine out of the car will give troo fly -wheel horse power and not enougth p[power wtf lambos that do over 200mph only have 650 engine hore power and weigh more than an rx7 this things a beast if you heard this thing at 14,000rpmyou'd shit your pants!
It's all in the peripheral porting (p-port). Makes the air's path as straight as can be through the engine making more horses at very high revs. This thing would keep pulling to beyond 12000rpm I would imagine. Still, a p-port means you get shit-all midrange torque, but no one cares about that in a closely-geared, drag/race/drift car.
Really easy! A stock, no extra porting 2.0 liter *3 rotor* engine puts down close to 300 rwhp. Throw a decent sized turbo on there, get 450. Peripheral Port it and throw a bigger turbo on her....easy.
Daily driver? For how long, 1 year? I feel for those Apex seals. Nice power!
mtech20 4 months ago
This has been flagged as spam show
Well here is what you do, multiply each rotor by .654 L x 3 sides and you get the displacement for these motors.
2 rotor .654L x 2 x 3 = 3.9L 13b
3 rotor .654L x 3 x3 = 5.89L 20b
4 rotor .654L x 4 x 3 = 7.85L 26b
Now you know why they DRINK petrol.
Manoo62 1 year ago
This has been flagged as spam show
Well here is what you do, multiply each rotor by .654 L x 3 sides and you get the displacement for these motors.
2 rotor .654L x 2 x 3 = 3.9L 13b
3 rotor .654L x 3 x3 = 5.89L 20b
4 rotor .654L x 4 x 3 = 7.85L 26b
Now you know why they DRINK petrol.
Manoo62 1 year ago
Well here is what you do, multiply each rotor by .654 L x 3 sides and you get the displacement for these motors.
2 rotor .654L x 2 x 3 = 3.9L 13b
3 rotor .654L x 3 x3 = 5.89L 20b
4 rotor .654L x 4 x 3 = 7.85L 26b
Now you know why they DRINK petrol.
Manoo62 1 year ago
@Manoo62 yes cause a 13b engine code really would apply to 3.9L and if anyones ever of heard of a rotary over 7 litres please lets see a video also how about u acctually find out what your talking about before you try and tell rotary enthusiests how big there engines are
85VWWesty 1 year ago
@85VWWesty So your a rotary enthusiast and you still dont understand how to measure the capacity of an engine, what an idiot.
Manoo62 1 year ago
@Manoo62 if the wankel engine couldnt get over 300 hp with a 13b 3.9L it would be a pointless and never used invetion mazda cant even make rotaries over 5 litres so dont try convince ppl on shit you dont even know what your talking about its 1.3L for a 13b
85VWWesty 1 year ago
@85VWWesty Well at leased you have spotted why rotary's have gone nowhere in the last 50 years. Why dont you actually do your homework. Google 'Rotary Engine Displacement' the first site that comes up is RX-7.com
Manoo62 1 year ago
@Manoo62 its called sarcasm a 4 litre rotary is inpractical and the rotary engine is very practical in many situations look at the top rated comments if you really want to know the displacement
85VWWesty 1 year ago
@85VWWesty The capacity is simple maths, the 20b has 3 rotors, each with 3 chambers, each chamber is 654cc i.e 3 x 3 x 0.654 = 5886cc.
Using Advandestromath's maths would make the Nissan Z370 a 1.2L engine.
Manoo62 1 year ago
@Manoo62 you cant use the same mathematics to compare a rotary engine to a piston engine easy as that
85VWWesty 1 year ago
@85VWWesty So swept volume in one thermodynamic cycle isnt a measure of capacity any more....yeh right, try again.
Manoo62 1 year ago
@Manoo62 did i say that no i said you cant use the same mathematics to compare a rotary to a piston go to any rotray owner or even mazda and say the 13b is 3.9L and not 1.3
85VWWesty 1 year ago
@85VWWesty So you have no idea about engineering, no idea about how engines work, no idea about simple geometry, no idea what you are talking about really.....but your still right!?!?!?
Yeh you have made a good case there....that your an idiot.
Manoo62 1 year ago
@Manoo62 cause you saying that a 26b is 8L is me not knowing shit all about engineering, engine works or geometry why dont you look up your facts before not accepting that your wrong and thinking rotarys are crap i wouldnt even be surprised if this is Aji8
85VWWesty 1 year ago
@85VWWesty Your obviously a idiot, I have given you a reference on how to measure a rotary's capacity and you still dont understand!?!?!?!....because your a retard. Stop posting shit and go play with your crayons.
Manoo62 1 year ago
@Manoo62
Well here is what you do, multiply each rotor by .654 L x 3 sides and you get the displacement for these motors.
2 rotor .654L x 2 x 3 = 3.9L 13b
3 rotor .654L x 3 x 3 = 5.89L 20b
4 rotor .654L x 4 x 3 = 7.85L 26b
Now you know why they DRINK petrol.
Manoo62 1 year ago
@Manoo62 you are retarded....
Tj1056 1 year ago
@Tj1056 Yeh well reasoned argument there arsehole. Good job you didnt just wade in with petty insults like a fuckwitt.
Manoo62 1 year ago
@Manoo62 you are fucking retarded...
Tj1056 1 year ago
@Tj1056 QED I think.
Manoo62 1 year ago
This has been flagged as spam show
@Manoo62 2 rotor .654L x 2 = 1.3L 13b
3 rotor .654L x 3 = 2.0L 20b
4 rotor .654L x 4 = 2.6L 26b
where do you get this kind of idea to x3 on all of them?
Tj1056 1 year ago
wish could drive cars like this on the streets in cali...
Tj1056 1 year ago
This comment has received too many negative votes show
that does not sound a like an rx-7 at all, more like a skyline
archucky 2 years ago
20B
maksimspelko 2 years ago 3
The sound is extremely distorted.
crazysniper308 2 years ago 3
doin a little bit of brake boosting eh?
supradave9 2 years ago
insane
OwiuX 2 years ago
mad nice RX-7 man!!!
love the set up!
sushiking56 2 years ago 2
Impressive numbers for 1.3L displacement. A very narrow power band however as the graph is very parabolic. I would rather have a consistent 600hp and flat torque curve from 3k rpm on, than a peak of 900hp at redline. That's just my 2 cents :-p
boy0859 2 years ago
It's a 2L 3rotor with a big turbo.
Capnboost 2 years ago 2
Amen to that shit dude. I'd rather have a tough pull through out the drive than it peak at the last bit at red line.
psychoninja911 2 years ago
1.3L is the factory 13b, according to what i read, if it's right, it's a 2.0L 20b out of the mazda cosmo, unless it was built using 13b rotor housings.... But i'll take your 2 cents, i agree with you on how i'd personally like my motor set up
Core365 2 years ago
Well here is what you do, multiply each rotor by .654 L and you get the displacement for these motors.
2 rotor .654L x 2 = 1.3L 13b
3 rotor .654L x 3 = 1.96L 20b
4 rotor .654L x 4 = 2.6L 26b
Advandestromath 2 years ago 9
thats not a1.3 liter its a 2.0 liter 3 rotor. and i'd rather have 900hp and a 10-11k rpm redline than 600hp and a 7k rpm redline. Thats just my 2 cents.
SwaggtasticZTT 2 years ago 2
Heh Heh, i must've been drunk, of course built rotaries can pull past 10k rpm. Its a fuzzy graph but if it puts down over 800hp from 7k on then thats a nice power band. I would still prefer a flatter torque curve for cruisin the streets, but its prolly a monster at the track.
boy0859 2 years ago
Why is it a penny for your thoughts but you have to but your twocents in?
Someones makin a penny.
blyndrotor 2 years ago
its a 20B not a 13B. 13B is 2 rotor, 20B is 3 rotor, 26B is 4 rotor.
gklompas 2 years ago 3
Mazda 787B Engine * Spark plugs: 3 per rotor * Fuel system: Nippon Denso electronic fuel injection * Battery: Pulsar * Maximum Power: 700 hp (520 kW)/9000 rpm * Maximum Torque: 448 ft·lbf (607 N·m)/6500 rpm * Instrumentation and Telemetry System by Pi Research
NKLIOAI 2 years ago
RESPECT!!! Nice work!
fan4t1c 2 years ago 2
omg!
blackheartz909 2 years ago
The setup on this car were made for street driving... street ported engine with a big turbo! thats it!
we made more horse powers with no problems!
but the driver wanted a all daliy driven car! :)
GarabedianRacing 3 years ago
Not bad for an auto I'm impressed for the numbers you guys got nice build.
jdmfreak1992 3 years ago
Autos are really better for turbo'd cars. They keep boost longer than on standard transmissions.
johnwilldoug777 2 years ago
dailiy driven car hehe nice one , 900hp to go to work hehe :P
3L3CTR0static 2 years ago
@GarabedianRacing street driving? id like to see that!
Sefveron 1 year ago
@GarabedianRacing so, u just ported the 20b, added a fuckin hugh turbo and thats it? ;O
AtzengamerMemphis 11 months ago
@AtzengamerMemphis yeh something like that.... and little more :)
jeangarabedian 6 months ago
how did he shift his left foot was hanging out the door the whole dyno run?
jdmfreak1992 3 years ago
That's a great quetion
09mc 3 years ago
Lol you see what i mean. Sequential trany??? There is no way in hell thats an automatic.
jdmfreak1992 3 years ago
its an auto tranny
GarabedianRacing 3 years ago
really?? Wow totally fooled me is this your car?
jdmfreak1992 3 years ago
It was our car but not any longer! An norwegian guy bought it... :)
He is planning to build it more extreme then before......engine and bodywork!
You will see it later on!
GarabedianRacing 3 years ago
@GarabedianRacing ....what kind of auto tranny is this?
hotwheelz28 6 months ago
@jdmfreak1992 All 20B engines came stock with an auto tranny. If you see someone shifting they either added the 13btii tranny or went after market.
mynightmare137 1 year ago
Does anyone know what rims those are?
Thanks in advance!
Rosatii 3 years ago
This comment has received too many negative votes show
899whp or at the output? It's still not a terribly big feat, since there are turbo IIs running over 650 hp with 2 rotors. This car is using E85, so we can assume it's fuel mixture is tuned pretty aggressively, and still "only" 900? If it's at the wheels, different story though.
Nateb123 3 years ago
it's not a 13B-REW
Soffex 3 years ago
"20b" in the description was kind of a give away.
Nateb123 3 years ago
20b is 3 rotor...
PAC0TAC0 3 years ago
its at thewheels horse power thats why its on a rolling road not an engine dyno only engine dyno meters were you take the engine out of the car will give troo fly -wheel horse power and not enougth p[power wtf lambos that do over 200mph only have 650 engine hore power and weigh more than an rx7 this things a beast if you heard this thing at 14,000rpmyou'd shit your pants!
vengebaby 3 years ago
Imagine if the wheels under the car would stop :P DAM!! A BIG WHOLE IN THE WALL
R3C0N53 3 years ago
Actually no. No foreward velocity.
thumpetto007 3 years ago
Rx7 from Hell! Oh my God! What a Sound!!!! 900 Hp! Kick ass, go home Viper!
88Pornoallemanne88 3 years ago 10
how many kw?
XCLUSIVINC 3 years ago
its a 20b 3 rotor motor thats why with a bigger turbo it can reach 800+
BudCadawIen 3 years ago 4
Fint med lite Wanklar i länet ;)
kabel51 3 years ago
thats a BIG ASS turbo
gogugogu 3 years ago
DAMN!
Thats the longest cat back ive ever seen! :D
where can i get one? Lol.
Drum44er 3 years ago 3
i hate all of you individually
carsey51 3 years ago
but i don't see how with a "decent size turbo you can get 450 and a "bigger" turbo get 900hp
BriansRX7 3 years ago
It's all in the peripheral porting (p-port). Makes the air's path as straight as can be through the engine making more horses at very high revs. This thing would keep pulling to beyond 12000rpm I would imagine. Still, a p-port means you get shit-all midrange torque, but no one cares about that in a closely-geared, drag/race/drift car.
Nateb123 3 years ago
Need like, 1 more horsepower too make it even
BallBearingTurboFC3S 3 years ago
how did you get 899 hp out of a rotary?
shocker792 3 years ago
Really easy! A stock, no extra porting 2.0 liter *3 rotor* engine puts down close to 300 rwhp. Throw a decent sized turbo on there, get 450. Peripheral Port it and throw a bigger turbo on her....easy.
CyberPitz 3 years ago
drift
Therealnerdi 3 years ago
gay
zunetrav4 3 years ago
i meant if its used for drift!!.. nice rx-7
zunetrav4 3 years ago
what is this car used for? drag? autox?road race?drift?
encinaj 3 years ago
is that a 20b or a 13b dont know,what a dog box box tranny.
finaggo 3 years ago
It says 20b in the description
dugwillis84 3 years ago
SAY SUTTIN ELSE???....RICE BOMB
infernoKid2 3 years ago
yeahhhh, the 20B is a 3 rotors, 2.0L, Twin turbo engine that pushes 300hp and 300 lbs-tq at 8 psi in stock form.
you probably drive a crappy wannabe ghetto fabulous car like a Hyundai.
ohh, and btw, 50 cent is a snitch working for Cops. He's a pussy who hides behind the police shield... just like you hide behind your computer screen.
rx7outlaw 3 years ago
lol i like how he calls it a rice bomb what a douche
GlycerinZ 3 years ago
WTF??????????????? wats the go with the exhaust pipes extended? that would only lose power
ak47rotary12a 3 years ago
to get exhaust gases out of garage/building
grounder1320 3 years ago 3
LOL ak47rotay12a = noob
gnuojoung 3 years ago 2
ROFLMAO
89jdm7m 3 years ago
Its sorta saying, Get me off this machine and on to the road!!!!!!!
mazdamclaren 3 years ago
lmfao you guys are great....i would love to see a 20 rotor....don't know what you could put it in....but i can only imagine what it would sound like.
fpsraab 3 years ago
ok but 30 are better than 20 hehe
J90lude 3 years ago
Why cant u drop the music? It sux, bigtime.
klasse2bub 3 years ago 4
3 rotors are better than 2
vitsou1 3 years ago 3
true..4 rotors are better than 3
malekai777 3 years ago 2
6 are better then 4 though
elit34 3 years ago
12 are better than 9
BigManMamasBoy 3 years ago
yeh but 20 are better then 10
elit34 3 years ago
Wowzers, that'd be a long motor...
Aor87 3 years ago
i think all you need is 1 rotor
Janaida 3 years ago
witch equals less power u fukin twat
lilcow418 3 years ago
fuckin austalian .its a joke about 1 rotor why you having a midlife crisis about it chill out
Janaida 3 years ago
he said twat not twit :(
eatgluedrnkpaint 3 years ago
snygg bil och låter väldigt snabb. skulle också vilja ha en rx-7=P
timpa1p 3 years ago
its that a dog box tranny that i hear
nice car though
Roy01 3 years ago
its that a dog box tranny that i hear
nice car though
Roy01 3 years ago
pull that pipe out of its ass! i wanna see some flames!!
uhdragon2 4 years ago 2
How much torque was this running?
Jeff13bREW 4 years ago
This run 605ft-lbs
max out put 680ft-lbs
GarabedianRacing 3 years ago
whats that in nm?
Lindholmer5k 3 years ago
damm thats on e85, never thought about that in a rotor. Nice work, street video requested!!!!
dukedub 4 years ago 3
beautiful
diesel11679 4 years ago 2
Outstanding!! Sounds healthy & full of power
OnlyArabiaNprince 4 years ago 2
holy s**t!!!!
warrior354 4 years ago 2
Greetings from Greece....
You are a crazy Armenian Rotorhead!!!!
Keep up the good work mate!!!!
AereVoS 4 years ago
dude thats sick!!! very nice.
crakmeup 4 years ago 2