beer pong table with automatic ball washer

[imegatrone]

I am very happy to see the vidoe after you give this All the others that I have seen here on youtube does not show the ball coming up wet, or you are reaching into something to get the ball out after the washing

[bundawartini]

I Love The Video It Can Increase My Knowledge so far, one of the better if not the best automatic ball washer I have seen.

[NganaJHone]

Steady I Really Like This Video one of the better if not the best automatic ball washer I have seen.

[Ondelendo]

Good, I like that you share this video, I wish success always beer pong table with automatic ball washer

[bebeheuy]

Nice Video That You Share , So Very Nice Thanks You so far, one of the better if not the best automatic ball washer I have seen

[AntoMelta]

I Really Like The Video From Your beer pong table with automatic ball washer 

[willamricard]

Your Video Is Very Useful Sharing All the others that I have seen here on youtube does not show the ball coming up wet, or you are reaching into something to get the ball out after the washing.

[liftedJ33P]

you should put a sensor at the discharge end that triggers a relay so that the blower motor doesn't run unless there is a ball there. Might help for a more quite game time

[emmanueloliva1]

is true dude its time to share how u did that shit..

[fuzzyg18]

@emmanueloliva1 as soon as im done making this i will post up the how to video just look out for it

[emmanueloliva1]

@fuzzyg18 thanks

[Mesmerlab]

but will it blend?

[blids21]

@Mesmerlab i litterally lol'd



[Jelly2k8]

Luck of the fuckin irish

[mclovin1JB]

FUCKIN AWESOME!

[BlackGhost18]

lol did you use a garden hose?

[BlackGhost18]

It has sprayers? right there on top where the ball comes out?

[coloradokid1992]

Dude I'm a sport management major, figuring this stuff out on my own clearly isn't my strong suit. Somebody tell how to make this badass ball washer

[vyeguy]

@coloradokid1992

I figured this out after a few minutes the hardest part was figuring out how he got the ball to pop up.

1) he has a constant flow of water washing the balls that has a slight decline to the other side

2) close to the end of the pipe there are drainage holes to release the water

3) a 12V computer van/ hair dryer is at the end that pushes the ball up the hole at the end.

[Joey95926]

@vyeguy Not even close, but many people have figured out the concept. The new one is gonna take some real innovation.

[RosenbloomC]

mine works



[low72]

nice! i'm impressed, does it disinfect though? also...does it have a licorice dispenser or a fish tank?

[moealsharif13]

hope it has an AXE Detailer at the bottom

[swhit333]

if you r to stupid to not be able to make one on ur own thn u shouldnt hav it

[TheSiemenstoute]

was i the only one who noticed the car, looks kinda cool

[ThePerkUPS]

how does it wash it exactly? i was thinking of makin one with like a fan thing but i figured itd have to be somewhat wet to stick in the cups you know? so how does the ball get wet? and did you use a fan or what?

[TheHavran0]

great job guys

[19AllPro90]

That table is DOPE!

[dabrew3]

Check out Pongitizer Beer Pong Sanitation Solution. It would work great with this table.

[Ginoattolino]

they dont show the midget sitting under the table with a bucket of water

[dbray1]

thats bitchin

[hyperglo78]

1 liter per minute isn't enough to power my sprayers, and I would be afraid a hair dryer motor would burn out after a few hours of play. Nice work though!! I'm glad someone else pulled it off. Let's see a video.

[kjun13]

It takes about one second to return the ball.

[kjun13]

I just built one.

- PVC parts

- hair dryer with power control cord

- plastic tubing (wider for the drain than the input)

- 1L / minute garden pump

It's a little loud but nobody seems to notice when the music's up :)

[SpinTheBeat360]

@kjun13 hey can u send me instructions on how to build it?

[kjun13]

@SpinTheBeat360 I will make a video tutorial ASAP, but I have a lot of shit to do this weekend. keep in mind that my design is still a prototype as I couldn't find any official plans.

IT IS NOT PERFECT. I will perfect the design when I make a 2.0 table.

[dorantbb]

Awesome job guys. Would I be right in saying you drain the water before the air stage?

[hyperglo78]

Magic M.F'R!! This was never meant to be a how to video! It's supposed to inspire you unimaginative bastards build your own. We looked online here and saw that there wasn't many legit washers. We were inspired by a few, and this is what came of it. Mixing air and water is not easy, but clearly it can be done. Figure it out weak sauce!

[MrAlexrios1]

yea seriously how did u make the ball go up like that?

[GroinStabbingPro]

Hey Mofo, just tell us the instructions, partlist or put up a how to video. Its been two years since this video, time to share!

[bigmofugga1086]

i wish i had something that would auto-clean my balls

[DanteVD69]

how did u build it

[al3xtube11]

how do you make that ball washer

[tjhockey75]

cost?



[55Pricey]

@hyperglo78 Man, that table is awesome. I am in the process of building my own as well and I wanted to make s simple ball washer like what we have all seen here on you tube. But yours is by far the best. I'm trying to figure out the separation at the bottom to get the ball to come back up and float. Are you using a computer or A/C fan? If you could be so helpful and hook me up with some instructions, that would be great. Thanks. danprice1077@yahoo.com. Nice work man, congrats!

[CrackHeadForLife420]

Yeah unclean balls have really been a problem for me.

[adviloverdose]

i wish i could washhh my balls that way ;)

[fuzzyg18]

i need a parts list and specs plz

[mrpongplayer]

Just curious are you filtering the water? If so does it have to be changed after every game?

[bigboytbrn1]

can u send me the parts list and instructions...

luisisabel1@yahoo.com

[bigboytbrn1]

yea this is like the best automatic washer....if i can...can u give me the parts list and instructions?

[gdecelia]

Please send me a price estimate and how I would be able to get this table. This is so sick. Please email gdecelia@syr.edu with necessary information. Thank you

[johnnyboy6260]

How dose the ball washer work

[Aq3ntOranq3]

Hilarius song choice! 2 Thumbs up.

[PensiveIntent]

its

beautiful

[theDanish9]

This is awesome man. can you post a how to video or maybe just a list of parts of and instructions.

[JayRad1479]

My only question is why cant you share the wealth? Like honestly, i just made my BP table, and personally love it...but i would love to upgrade, ya know? Its like Albert Einstein not sharing his great ideas with the world, if you have time, would you please make a "how to" video, and if not, guess this idea will just go nowhere...

[ltz400racer]

is there any way you can post up a how to?

[silverditch]

What type of sprayers did you use?

[basserist206]

this is amazing and you get bonus points on the table cause im from boston

[pudgeman10]

I know how it works

[kyle44422]

that looks amazing... but wat if you r playing teams... two balls... wat happens if you but both balls in and i know you can just put one in at a time but i want to c wat happens if you put one in after the other

[hyperglo78]

@kyle44422 It's fine, drop two balls, the second one will push the other out of the hole though. its individual units on each side.... makes ball washing nice and easy...

[KwiatkCD76]

Oh my God do want!

[Blueninja33]

How did you build the washer system?

[ib3Tr0LLin]

that is fuckin amazing

[casams1992]

PURE GENIUS!

[hackleman20]

SICK!

[p0o0ofy]

omg thats sick

[TooL33T]

How did you make the wash system? I have my own table I built and would love to add this to it

[micahmats]

hey i was wondering, how much would you want for a part list and instructions for how to make the ball washer!?

[xx0311xx]

This is by far the best looking beer pong table I have ever seen. Amazing. You selling these?

[JNASTY918]

I feel like if you were drunk you wouldn't even play the game anymore because of the amazingness of the ball popping out of that little hole all the time!

[Schutzstaffel23]

whats the song?

[mickal222]

so how much are u selling it for?

[nugguluspotomas]

and fuck you sampy05. i fuckin hate cunts like u.

[nugguluspotomas]

that, my friend, is the coolest fuckin BP table i have ever seen.

[gannon382]

are you selling these? if so i would like to buy one. gannon_382@msn.com

[noelsark]

so much hatred. cool table dude. i think its badass. these fools just mad cuz they cant figure it out. lmao. keep up the good work.

[gregorydharris]

I see people arguing about the ball washer if it works or not, cant really tell from the video but im sure it does if you say it does. i think this is an awesome table! is it easy to move? and do you plug it in or is it battery operated?

[gregorydharris]

thats awesome, i see people are arguing about if the sprayers work, which in the video is arguable, but if they work they work, but i love the table! is it easy to move? and do you have to plug it in or is it battery operated?

[nickcrang]

i would love to know how you built the ball washer mate ..?

[Juggalo71493]

i want it!

[McFrair]

Hey man i could def use some instructions and parts. ive got my table ready to build.

email: McFrair@hotmail.com

[wetwelder2]

Hey we are making a similar ball washer and we are stuck with part of it if you could email me and give me a pointer that would be great...yamrcng2@yahoo.com

[obudda57]

dude im looking to make a beer pong table and i love the ball washer u made how much would it cost me to have u make the table or just the ball washer..

[alfordjp88]

ur ball washer is nice, ur table overall.....not so hot

[Forti7709]

Can i get the part list and instructions?

[thegoods34]

i fucking love that washer!

[CrashTestSkater]

can i wash my balls in it?

[kaliguy05]

brilliant.

[skymelville]

FUCKING MICKS THAT AMAZING

[leok456]

i live in the seattle area, how much would you sell the plumbing setup for?

[leok456]

@leok456 or let me know how do you get the balls to pop up once they reach the other side of the table?

[AlexRichani]

This is by far the best ball washer I've seen. I am about to make a table. Is there anyway you could put out some instructions on how to make it?

[AlexRichani]

I'm about to make a new table and want to put an auto ball washer. would you be willing to give me some instructions on how you did it?

[bill12690]

@AlexRichani

check out mine in my vids, if you like it, i'll let you know how it was made. judging on what comments I've read it doesnt seem like this guy is going to tell you.

[bigboytbrn1]

@bill12690

yea can u tell me how u made it cause urs is really good.

[bill12690]

i've got a pong boll washer i'm working on now, that is very similar to this.. have a video in my uploads, check it out

[langerCAN]

this table is sick.

[chancehancock]

Hey man I was wondering if u could do a video explaining how u did that sick ass ball washer. By far the best one I've seen

[Shen357]

there's a guy under the table :D

[nixster36]

the ball drops into a horizontal tube that has sprayers pushing water cleaning the ball. a fan pushes the ball through the horizontal tube and up back to the table level. the water drains out at the right elbow bend. trick is getting a fan strong enough and the whole where the water drains out the right size so the system doesn't flood but no air escapes. the rubber cover on the first tube is to stop air from coming out that end.

hyperglo78, correct me if I am wrong.

[bill12690]

@nixster36

thats more or less how mine is... check it out in my uploads. although i don't have anything covering my "in" side. video in my uploads is of just the basics, not yet mounted on the table.

[nixster36]

@bill12690 good stuff man, it looks great. really simple. what are you using for a fan?

[hudson1007]

Can you shed some light on the auto washer design? I've been looking for hours and can't find anything.

[EythanJ]

This is a brilliant idea. How does it work exactly?

[dekerk21]

Hey man! Nice Job on the auto ball washer! Real Talk! Screw these other guys who are hating on you! Anyways how did you get the ball to rise back up? I'm guessin you're using a waterproof fan? No? If so, what kind? Also in your design, are you recycling and filtering the water?

[scootterpie]

HOw do u do that!

[Ohyesindeed]

Dam this shit is on a whole nother level dude , that shit is fucking smooth. Kudos.

[hugewang]

id let that table wash my balls. oh wait haha

[pat07vivere]

AWESOMEEEE!!!

[robertha]

no dont take off the skirt, even if you dont make any money selling beer pong tables, only a moron would not understand the basics of AIR and WATER.

[scrappydoo8420]

what wound you charge for the parts list and instructions for just the ball washer?

[EXP7i]

that shit is sickkk

[lonjouthan09]

That's badass!

[Changxboi]

That's a cool table man. I want one!

[johnsoncody17]

Hey man, I know people probably ask you for a lot of shit and it probably gets annoying, but could you please tell me what those metal things are that are around the holes?

I've even asked people at home hardware stores, still nothing.

thanks

[MoneyMakerMatt]

sick table man, i wanna build one like this soon

[Joey95926]

Don't let the haters get you down. I never saw you advertising this for sale, just answering questions from people who approached you. It's a tits ass table and I'm having trouble finding anything that either of these douche bags have posted that anyone would give a crap about.

[FlannelZebra]

I agree with sampy05 though dude you should take the skirt off and show off your design because lets be honest there is no money in selling beer pong tables.

[sampy05]

get on my level he says. and someone cant just look at the underside of the table and take your ideas. it doesnt take a powerful mind to think up a system. took us one day to draw it out and 2 days to build. finished in time for the beer pong tourny we hosted. you think you are gonna get rich off this idea? its not cost effective, there are cheap bp tables that are easy to ship. if someone is serious enough about one they will figure a way to build it. not buy it from your lame ass.

[mafew129]

how much would you sell this type of table for?

[hyperglo78]

It depends on how far away you are. We might be able to work out something as far as a parts list and instructions.

[mafew129]

im in maryland. How much would parts cost? it it easy to build with instructions?

[dekerk21]

@hyperglo78 hey i wanna build a table and ive been looking for a automatic ball washer i seem to really like yours because its fast and simple and i wuld like to know what u used if you dont mind thnks

[Notbord16]

@hyperglo78 could i get some instuctions list and parts like

[HeatherAustin]

@hyperglo78 yeah send those tp me aswell

[EnterTheOcho]

@hyperglo78 I might be interested in something like that. A parts list/instructions, that is. How would I go about getting that?

[kyle44422]

@EnterTheOcho same!

[sampy05]

haha ya right, fish tank pump is all you need to pump the water to both sides of the table. doesnt have to be huge, mine is quiet, two silencers on the fans and you cant see anything from the side even if there was no skirt like your hula table. about the watch thing, thats kind of girly man, i guess you can hide your purse under that table no problem though.

[hyperglo78]

Sure, it's enough. To run a drizzle down a tube. I have sprayers that actually wash the ball. And hey, douche bag, the skirt was put on so that all the tool bags that come over to play on the table can't just look under and steal my hard work. So how about you eat a dick. By the way, if your going to talk shit about my table, why don't you post a video of you sweet fish tank setup? Atleast get to my level.

[nixster36]

@hyperglo78

a pond pump is more than enough to wash the ball if you have it set up right. and, as far as your setup goes, which is very nice btw, is it always on or does it turn on when necessary?

[Dylan6281]

@hyperglo78 It's not very nice to make fun of your friends

[gChinkin]

@sampy05 chill man

[sampy05]

i made just finished my model, i used a fish tank pump for continuous water flow and 2 fans for air flow. fans blow air through the whole PVC system and water drains out into a main bath, where it gets filtered and pumped again. this guy doesnt want people to see under it because it probably looks terrible. PS weak paint job, and who wears their watch like that?

[hyperglo78]

The paint job was rushed for saint patty's day. I wear my watch like that you Turd. And I don't show you the underside of the table because there is way more time and thought put into this system than a fish tank pump you weak ass. Nice hate job though. A fish tank pump? Weak. LOL.

[mossman94086]

@hyperglo78 too much time and thought put into making this system?? i saw this vid, went to the store, and had it built under an hour...

and if anyone wants to know how to build this ball washer, i'll let y'all know how.

[MrJaesm17]

@mossman94086 Hey can you tell me how to build this auto ball washer?

[MrJaesm17]

@mossman94086 can you tell me how to make this?

[Bworacek]

@hyperglo78 hmm you mentioned your watch lol you arent by any chance an EMT? my dad wears his like that aswell my guess is timing on a pulse check but idk

[BrettSummer]

whata ass hole....

[azmadskills]

@sampy05 I wear my watch like that.

[redheadp08]

sick nasty bro! can u tell me how to make one man?

[Kannondale07]

do an automatic ballwasher & dryer, than talk to me. it levitates above the playing surface after getting washed waiting for a player to take the dry ball

[TheTimeismoney80]

Very sick bro pure genious I like how the ball stays there and not just shot out

[sfscdsgigi36]

thats sick

[joechadwick1]

yap, im making me one of these

[bowlingrocks2]

nice nice

[Natesmodelrailroad]

Alright. So it pops up pneumatically. How about some plans for the rest of us dorks who love the idea?

[blueneptune146]

What do you feed the wizard under the table who operates the ball washer? I say some blueprints/plans need to be posted asap or else I'll have to claim it's sorcery!

[Dudefish420]

That's a bit to much for booze

[epitaphgiraffe]

i think i love you... or at least your table

ya fuck you i love the table

[ugoboom5]

gimme gimme gimme dude thts sick

[BornInTheCreek]

verry impressive. i need that in my living room now! IRISH HOOAH

[mburi11]

i just came in my pants

[bhum616]

Sick as hell!

[oldfryrice]

ahahh wit da clover n da middle yes that tables bad ess

[lhamilt2]

i'm baffled by how you have that set up...idk how it gets from the water to the air hole without blowing water out the hole!?!

[Zakta37]

hey can you tell me how you made your automatic ball washer with air and water?

[vvaDAdadaNG]

this is just amazing

[Atrexx21]

hey man, i have built some tables myself for people, 1 or 2 with auto ball washers and they turn out great. personally, i like your setup, do you think you could explain how this is setup and what you used to make this way happen. i really like it

[yansk8chihuahua]

i wouldnt mind having a sexual intercource with that table

[SlySanders21]

sweet

[SARAHDARLINGx]

THIS IS FUCKING BEAUTIFUL

[jonathangarcia2007]

lmfao hahahaaaaaaaaaaaaaaaaaaaaaaaaa­aaaaaaaaaaaaaaaaaaaaaaaaaaaaaa­aaaaaaaaaaaaaaaaaaaaaaa