iPod Touch 2nd & 3rd Generation Digitizer Touch Screen Replacement Guide

[TinyTC1992]

just repaired mine thanks for this deffo best one out there

[JYEditing]

Hey are these tools the same tools as the ones on the website ? As the ones i previously brought on ebay broke within in seconds of use.

[Custompod]

All the tools we use on our videos can be found on our website under the iPod, iPad & iPhone Tools section.

[1JeSsE0123]

i sacratched the botton screen i think its called lcd doing this but just a lil one will it affect it it still turns on ?

[Custompod]

@1JeSsE0123 T=That should be fine, if it is a light scratch it won't affect the screen working at all and the chances are that once it is powered up then you won't see it anyway :)

[jeeezzzuuuz]

this vid is the clearest so thxs!!!

[Larce89]

This is the best video on how to do this. If you actually analyze how everything connects like he does, it's not that hard.

I used a razor blade knife to get in between the rubber and the medal because if it's an iPod this old, the rubber is crumbly and difficult. I did most of the work with a small flat head screwdriver though. Don't be afraid to wiggle it around in there. Really, the only part you have to be cautious with is the ribbon cable.

[thrama13]

Best video i found! fixed it in half an hour, but it was the first ipod touch i fixed :P thank you so much!

[donzaxspeed]

very good video ! all the best man!

[johnsphoneshack]

this is the best video for screen repair ivce seen so straight forward for someone starting out thanks fella and will be getting some screens from you :)

[SuperHusam21]

thx!!!!

[lebronmkt]

Thanks first video that was not crap

[unforgiven101inc]

you rock thanks mate...



[s0yce]

Thanks for the great instructions! Few minor errors on my part but works fine.

[craigldavis]

Best video on youtube showing how to get the screen out and back in.

NOTE: Make sure your clips are not bent into the wrong position before assembly -- it will cause the digitizer to malfunction!

Look closely at how the clip and frame position in relation to the outer shell.

The black plastic frame MUST go INSIDE of all of the clips. If a clip is bent causing the clip to go inside the digitizer it may go back together but it will interfere with the digitizer functionality.

[ramyasbali]

THANK YOU SO MUCH! This video was really helpful :) Thank you for providing such a comprehensive but concise video!

[626Kperez]

by far the best video out there!

[jenwren20]

Thanks so much! Just fixed my 14 year old son's ipod with these step by step instructions! My awesomeness levels are now thru the roof :)

[MizNique65]

This was awesome! This is the BEST video on this subject out there!

[lkinerk]

I was hesitant to do it myself, but this video gave me confidence. It was almost as easy as you make it look. Thanks very much.

[MoDxCLANx]

thank you so much

[rickysweet2011]

brilliant guide, thank you

[jsronnie]

This video is amazin. Thnx.

[jsronnie]

U make it look so easy! Nice video! Thnx

[UKRAINERULES253]

u made it so easy thank you

[SiikPros]

...and mind your fingers!!!!!! :D

[alzendani09]

thank you.

[Handman003]

Hey, thanks. This video was the most straight-forward I could find, and it helped a lot :D

[wfrm]

Thank u . U were very help ful . I was wondering about the home botten wit I needed for the home botten but I think I have all the info I need from the video . Once again thank u

[greendaygigi1]

i have watched so many videos on how to do this and your is by far the best one. thank you so much!

[pcf4life]

Thanks alot man i gotta change my screen sometimes next week just hope its as easy as it looks :)