your a fucking idiot you don't even no how to knock it in retard your edges are guna die cause gliding of the edge is a spastics way to knock in a bat . faggot .
you have got it all worng! oil the bat, let it soak over night in the shed or garage the oil locks all the fibers, all the knock in does is basicaly compact the fibers in thhe impact zone and edges so your bat lasts a lot longer, 3hours the most not four to six after you think yoou have knocked it in get a mallet with a ball on the end and see if it leaves seem marks use the wooden mallet again and then check with the ball mallet
when knocking in your meant to use the wooden mallet, then use the ball mallet to check if its leaving seam marks if its leaving seam marks u move back to the wooden mallet, u dnt knock in for 4-8 hours u knock in until the ball on a stick is not leaving seam marks then u go to the nets and if its leaving seam marks u stop and u have to knock it in with a mallet again,
ur prefered option would buy without scuff sheet but if it has scuff sheet i would suggest taking it off and knocking in
@alnicka08 Well everyone has a different opinion on what is the correct amount of time to knock in a bat. There has been nothing confirmed. You can't knock in a bat too much but I do totally agree with the front foot and back foot stuff.
I'm not saying your wrong and i'm right but everybody has different opinion.
if you have an extratec cover on your bat and a crack appears under the cover, how do you get rid of it? or do you just not get rid of it? please answer
if there are cracks under the extratec it really depend on wat type they are, if its a hair line crack u can take the extra tec cover off trying not to pull up the grain and lightly sand the area u should see it disappear, if its a surface crack depends on how deep and how big but if its not to big u can do same but nothing u can do for the bigger cracks unless u see bat maker
Hey guys, ok so I bought a new puma iridium bat last week and it already had extratec cover on it. I knocked it in, but when I took it to the nets to play it in, the toe cracked a bit. How do I get rid if the crack when I have the extratec cover on the bat?
Mate you know when you knokcing the edges do you know direct on the edges or you knock on the inside of the edge by the blade and edge and tell me how to make a bat light cuz my is really heavy lol????
@amanbhalla999 Your best bet is to knock i everywhere on the bat (try to avoid the splice and the back of the bat of course) so hit everywhere aroung the edge.
As far as i am aware there is no real way of making the bat lighter, you may have to take it to bat manufacture and ask them to do it but i don't think that there is aything you can do yourself.
mate really dont now what a splice is it the top part with the handle and sticker attached or somewhere and when i oil the bat where shell i keep it and can i keep it in my room mate?
Mate you know when you knokcing the edges do you know direct on the edges or you knock on the inside of the edge by the blade and edge and tell me how to make a bat light cuz my is really heave lol????
Make sure you knock for a bit longer on 45 mins or so, on top of the 3 hours.
The reason for knocking the bat in a bit longer, is because the sheet is actually made for helicopter wins, and with debris flying around it helps to have that little bit more protection.
So it is sturdy stuff.
All in all, it is harder to knock in with the elastic covering aka 'scuff sheet'
@iTurbanate2 The cricket ball mallet is used to see if seam marks appear if they do then you need to knock it in a bit more and once they do not appear then it is knocked in.
Nice, Ive just bought the new Newbery Thruxton (pre-knocked). Its an amazing bat so im gunna spend about 2-4 more hours making sure its as good as possible. Helped alot cheeres!
and where did u get this bat from i need to get my new sg cricket bat from there man i am playing for Warwickshire cricket clyb so i eed a new good cricket bat plzz tell me mate rich boy.
nice one mate.
i have the sam bat.
arimanithayavs 5 months ago
rape squirrels what sick freak comes up with that your messed up ' untouchable385'
sit down .
TheSpiers13 5 months ago
@TheSpiers13 Why because you are abusing me over the internet.. You really hurt my feelings when you do that..
Untouchable385 5 months ago
@Untouchable385 sounds like you should toughen up then ;)
TheSpiers13 5 months ago
@Untouchable385 dont worry bout him man love your vids he is just a retard!
iszakwasere 4 months ago
Nice one kid, good advice. Good luck with your cricket.
ptram83 6 months ago
Hi i am 12 years old and i am thinking to buy a kookaburra cricket bat but confused whether to go with the ice or kahuna
awsomeblossom4 6 months ago
youre a fag end of and your voice is even gayer then your gear .
TheSpiers13 6 months ago
@TheSpiers13 Brilliant, i'm glad you made some input.. Now go rape squirrels or whatever it is you do in your pathetic life.
Untouchable385 6 months ago
why you thanking me ? learn somthing about cricket for 1 .....
TheSpiers13 6 months ago
@TheSpiers13 I got one thing wrong about the bat and all of a sudden I know nothing about cricket.. Good one?
Untouchable385 6 months ago
idiot u think ur so rich and your pant is also teared!u call your self untaouchable ha!
abdullahsohail1000 6 months ago
your a fucking idiot you don't even no how to knock it in retard your edges are guna die cause gliding of the edge is a spastics way to knock in a bat . faggot .
regards
TheSpiers13 6 months ago
@TheSpiers13 Thanks?..
Untouchable385 6 months ago
faggot
johnaajoseph 7 months ago
@Untouchable385 just restoring peace in the world
Sify35 8 months ago
fag
Sify35 8 months ago
@Sify35 Thanks prick.
Untouchable385 8 months ago
I am gettin a newberry Krakatoa av herd there really Gud not beeen sponsored yet but hope i do and hpe it's by nwbery
z4h33r101 8 months ago
does every newbery bat come pre-knocked in?
MegaRockerKid 9 months ago
Or just knock it in then go and use a bowling machiene
rasher209 10 months ago
you have got it all worng! oil the bat, let it soak over night in the shed or garage the oil locks all the fibers, all the knock in does is basicaly compact the fibers in thhe impact zone and edges so your bat lasts a lot longer, 3hours the most not four to six after you think yoou have knocked it in get a mallet with a ball on the end and see if it leaves seem marks use the wooden mallet again and then check with the ball mallet
boccathfc 10 months ago
u need the extratec and/or oil the bat before you knock it in
jturn747 1 year ago
when knocking in your meant to use the wooden mallet, then use the ball mallet to check if its leaving seam marks if its leaving seam marks u move back to the wooden mallet, u dnt knock in for 4-8 hours u knock in until the ball on a stick is not leaving seam marks then u go to the nets and if its leaving seam marks u stop and u have to knock it in with a mallet again,
ur prefered option would buy without scuff sheet but if it has scuff sheet i would suggest taking it off and knocking in
Shamwowjack 1 year ago
Im sorry son, but you do not understand how the bat works.
Like myself, im not a great player of the ball and so i choose to play off the back foot.
So i choose a bat with a higher middle, so i can punch it away easier whilst standing up.
If you are a front foot player, you need to have a low middle so you get down to it and punch it through covers.
Knocking in for 8 hours is rediculous,
4 hours at max, then you are ready for nets with an old ball.
NO NEW BALLS
they are hard
that will crack bat!
alnicka08 1 year ago
@alnicka08 Well everyone has a different opinion on what is the correct amount of time to knock in a bat. There has been nothing confirmed. You can't knock in a bat too much but I do totally agree with the front foot and back foot stuff.
I'm not saying your wrong and i'm right but everybody has different opinion.
Untouchable385 1 year ago
if you have an extratec cover on your bat and a crack appears under the cover, how do you get rid of it? or do you just not get rid of it? please answer
thanks
Navman617 1 year ago
@Navman617
If it's cracked underneath, you have probably havent done things.
a. have not knocked the bat in correctly, or knocked it in but started using it in games with new, harder balls.
b. have not oiled it enough and so the fibers couldn't bond with the oil and strengthen itself.
c. have left it in the sun or you have left it in the rain. If it gets left in the sun.
The moisture evaporates and, it cracks.
Or it absorbs and expands and cracks.
Take it back to retailer and ask them to sand
alnicka08 1 year ago
@Navman617
if there are cracks under the extratec it really depend on wat type they are, if its a hair line crack u can take the extra tec cover off trying not to pull up the grain and lightly sand the area u should see it disappear, if its a surface crack depends on how deep and how big but if its not to big u can do same but nothing u can do for the bigger cracks unless u see bat maker
Shamwowjack 1 year ago
This has been flagged as spam show
Hey guys, ok so I bought a new puma iridium bat last week and it already had extratec cover on it. I knocked it in, but when I took it to the nets to play it in, the toe cracked a bit. How do I get rid if the crack when I have the extratec cover on the bat?
Navman617 1 year ago
Mate you know when you knokcing the edges do you know direct on the edges or you knock on the inside of the edge by the blade and edge and tell me how to make a bat light cuz my is really heavy lol????
amanbhalla999 1 year ago
@amanbhalla999 Your best bet is to knock i everywhere on the bat (try to avoid the splice and the back of the bat of course) so hit everywhere aroung the edge.
As far as i am aware there is no real way of making the bat lighter, you may have to take it to bat manufacture and ask them to do it but i don't think that there is aything you can do yourself.
Hope i helped. :) x
Untouchable385 1 year ago
@Untouchable385
u can pay money to a custom bat making company to get weight reduction on ur bat.
Shamwowjack 1 year ago
mate really dont now what a splice is it the top part with the handle and sticker attached or somewhere and when i oil the bat where shell i keep it and can i keep it in my room mate?
amanbhalla999 1 year ago
@amanbhalla999 you cant make it lighter its the flipping wood you fag
247HecTIc 7 months ago
Mate you know when you knokcing the edges do you know direct on the edges or you knock on the inside of the edge by the blade and edge and tell me how to make a bat light cuz my is really heave lol????
amanbhalla999 1 year ago
hey do i need to oil my bat befor knocking or not
ifthikharsafi1 1 year ago
can you use the mallet with a ball on top?
DeathBringer97 1 year ago
@DeathBringer97 Yes You Cann It Is Called A Ball On A Stick :)
Untouchable385 1 year ago
@DeathBringer97 yes
Mintberrycrunch1040 8 months ago
i have 2 bats both with scuff sheets or w.e. they are called on them
do i still knock them in the same way?
also, a ball on a stick mallet can be used instead of the mallet u have right?
iTurbanate2 1 year ago
@iTurbanate2 Yeeeh You Still Knock Them In The Samee Way.
And You Can Usee Eitherr. But From What I Hear The Ball On The Stick Is Better.
Hope I Helpedd xx
Untouchable385 1 year ago
@Untouchable385
yea thanks a lot man
iTurbanate2 1 year ago
@Untouchable385 With the 'scuff sheet'.
Make sure you knock for a bit longer on 45 mins or so, on top of the 3 hours.
The reason for knocking the bat in a bit longer, is because the sheet is actually made for helicopter wins, and with debris flying around it helps to have that little bit more protection.
So it is sturdy stuff.
All in all, it is harder to knock in with the elastic covering aka 'scuff sheet'
alnicka08 1 year ago
@iTurbanate2 The cricket ball mallet is used to see if seam marks appear if they do then you need to knock it in a bit more and once they do not appear then it is knocked in.
andymoss2010 1 year ago
My Bat ;)
LiquidEdit 1 year ago
can you use a normal hammer
1995Spurs 1 year ago
@1995Spurs dont be silly.
Needs to be softer than that,
plastic or rubber mullets are better than wood.
alnicka08 1 year ago
your cricket videos are really good for a kid compared to some I've seen
darthlewis1 1 year ago
Thanks Man Do I Know You Because You Added Me As A Friend ?
Untouchable385 1 year ago
@Untouchable385 No I just add people who have good videos and a good channel
darthlewis1 1 year ago
Nice, Ive just bought the new Newbery Thruxton (pre-knocked). Its an amazing bat so im gunna spend about 2-4 more hours making sure its as good as possible. Helped alot cheeres!
gamesmash25 2 years ago
i was told to use a mallet and then after use a ball mallet! if you have both.
JFer92 2 years ago
I got this from intersport not sure if you have one up north but if you do i reckomend it (And i Aint Rich Trust)
Untouchable385 2 years ago
and where did u get this bat from i need to get my new sg cricket bat from there man i am playing for Warwickshire cricket clyb so i eed a new good cricket bat plzz tell me mate rich boy.
amanbhalla999 2 years ago
if u play for warwickshire why arent u sponsored u mong?? liar!
JonnySchoey27 1 year ago
Yeh In Actual Fact A Ball Mallet Is Better
Untouchable385 2 years ago
hey can u just use a ball mallet
banditblue95 2 years ago
You Need A Mallet You Can Also Use A Ball On A Stick Or A Ball In A Sock
Untouchable385 2 years ago
Do you need a Mallet or Can you use a normal Hammer?
ajsingh00 2 years ago
That was pretty much ll my birthday money !!!
Untouchable385 2 years ago
Woah rich guy lol
aWpIeS 2 years ago
Incredible Looks Pretty Small But Is Really Nice !
Untouchable385 2 years ago
looks good! hows the middle?
Dylsters 2 years ago
Remeber to oil it!
po15odg 2 years ago
Not bad!
rafay79 2 years ago
This has been flagged as spam show
Dear Untouchable385
Loved it!
If you subscribe to : savewithfun (not my channel!)
message me after and I will subscribe you!
P.S. He is starting something awesome, I am just spreading the word!
tuyir23coolio 2 years ago