M112 supercharged 1999 v6 mustang

[shdo69]

Very very nice. I like it. I have a 96 3.8 with a super coupe motor in it. I have a gen 4 eaton m90 pushing 14psi. Check out my page and let me know what you think. There is three videos of my mustang and two of my SRT Caliber. My one video of my pony is called going for a ride. It kind of looks like your video here. Anyway love your set up very clean.

[StangLoose]

Does the m112 fit under the stock hood? and whats the speedometer go to?Sick setup man!

[vsixstang]

@StangLoose it is not with the stock hood, my seepdomètre up to 200 kph will thank you for the comment

[sk8ats1]

exhaust setup ?

[vsixstang]

@sk8ats1 I have Pacesetter lt headers, high flow cat magnaflow, Bassani x pipe and Mac cat back

[Renev12391]

hey sup?? did u cut the holes for the back bumper??

[vsixstang]

@Renev12391 I install a bumper gt

[Cobrastang18]

Heck yea man i got a black 1996 v6 Mustang BBk cold air intake and flowmasters, what all you put on yours and any suggestions for my mods to make it faster?

[vsixstang]

@Cobrastang18 sets of long tube headers, a 4.10 or 3.73 gear, do a split port swap and a good dyno tune

[freakelectronica]

That is the SHARPEST fucking engine bay I've seen.. Did you do all the painting/work yourself..? Looks GREAT!

[vsixstang]

@freakelectronica thank you for the good compliment and yes I have all done it myself

[iDPG95]

hey man, what does your spedometer go up to?

[vsixstang]

@iDPG95 200 kph

[mynamepeggy80]

did you convert it to a manual tranny? if so, was it really difficult to do? or was it pretty easy?

[civic0897]

@vsixstang are you running stock internals?



[vsixstang]

@civic0897 yes

[The00Mustang]

@vsixstang can you really hear the whine good inside? or is it more on the quite side? cause i wanna be able to hear mine scream from inside lol

[vellotrol]

@The00Mustang DAMN KIDDO! You call me homophobic but you haven't watched NOT even one video with some pussy in it. I guess that tell US something don't you think so? If you like to do other guys manscape it's ok kiddo there are more like you out there you are not alone. Come out of the closet or better of come out of your piece of shit Mustang.

[The00Mustang]

@vellotrol oh ur finally typing right? thats my bitch.... and u must not can't read, cause i nvr called you homophobic!!!!! an, there is no pussy videos on youtube u chomo..... so FAIL once again, lmfao good job

[vsixstang]

@The00Mustang I hear the whine good inside

[The00Mustang]

@vsixstang alright nice, cause some vids they can't really hear them, and i wanna hear mine lol

[civic0897]

Just out of curiosity, what kind of gas mileage do you get with this setup?

[vsixstang]

@civic0897 13.07 MPG



[vsixstang]

@JerryMohawk7 will see on the site mysteed perfornance

[steveo19922]

How do you get such a deep sound on your v6? I have one and I had to get cutoff 40's Flowmasters pointed down on the ground to even get close to a v8 sound but at high rev's it gets quieter, I'm just asking because I want a sound like yours.

[vsixstang]

@steveo19922 I have Pacesetter lt headers, high flow cat magnaflow, Bassani x pipe and Mac cat back

[djferndog]

where did you buy the supercharger from?



[zombiesquad103]

Hey guys, this might sound really stupid to some of you but im pretty new to this. Does anyone know if i could put like a stock eaton off a mustang cobra on my 2000 3.8 mustang?

[The00Mustang]

@zombiesquad103 dude don't feel stupid, but i think i read it somewhere that you can. you have to buy a lower intake manifold for the to fit on top, then all the other accesories witch im not too sure about haha

[The00Mustang]

@zombiesquad103 yea you can, but ive read that 6-8psi is safest and 350hp is the max u wanna go, if u got to 10-12psi and or wanna get closer to 400hp then it would be best to rebuild the lower end so it will hold. if u do that, then u might as well stroke it to a 4.2 with a cam an it will then b a v8 killer :)...

[sevenfold66]

is there a website or something that tells you how to do this?

[vsixstang]

@sevenfold66 will see for 3.7 mustang

[belin2009]

daem!!! is great!!! Mustang

[nicdaking]

barnak que ca lair le fun a driver ton stang ;) pi ca sonne presque comme un 8!

[Madmustangman99]

I have a few questions for you where and how much did you get your superchager for and where did you get your cold air intake

[vsixstang]

@Madmustangman99 For the price of supercharged it's personal. And the cold air intake is a JLT I find her on a mustang forum.

[03ZincMach1]

what hood did you have on the car?

[vsixstang]

@03ZincMach1 cobra R 2000

[wetnapkin1]

i have a question can you please tell me how and what to buy to supercharge or turbocharge my 2002 mustang v6?

[vsixstang]

@wetnapkin1 it's not for me to answer this question all depends on your budget

[tank1538]

sick setup

[vsixstang]

@tank1538 Thanks

[bouchey90]

whAT WAS UR TOP SPEED

[vsixstang]

@bouchey90 on the video 210 km / h or 130 mph

[duckanddodge01]

good camera work....

[vsixstang]

@duckanddodge01 Thanks

[onemichaelmarsee]

beautiful motor =D

[MaGNSG5]

Whats up vsixstang. what kind of supercharger is that and do you have 3.73 gears?

[vsixstang]

@MaGNSG5 The supercharger is an eaton m112 and I am originally a 3.27 gear but I will change to a 4.10

[MaGNSG5]

@vsixstang ok cool. i was thinking about getting me one and getting 3.55 gears put in also

[vsixstang]

@MaGNSG5 Your 3.55 will cost you double the space that you will want to change it to a larger

[MaGNSG5]

@vsixstang ok.  thanks for the info. what kind of exhaust system do you have on there?

[vsixstang]

@MaGNSG5 Pacesetter long tube headers, Magnaflow hi flow cats, x pipe and cat back Mac

[MaGNSG5]

@vsixstang sweet

[500erider]

@vsixstang Just one question.I thought the clock pods in the center of the dash went away after 1997.Am I wrong here?Very nice car too btw.Congrats!!!!

[vsixstang]

@xwinxterx chez Johnny Mortorsport a laval

[xwinxterx]

Salut j'aimerais savoir où tu a fait tuner ton char quand tu a installer ton M112 ? Merci ! beau projet

[vsixstang]

@xwinxterx Pour l'installation c est moi qui la fait

[lilslugger321]

did you have to buy anything else or was the kit compleate with injectors and such?

[vsixstang]

@lilslugger321 yes we need injectors, maf and several other pieces

[99ManMustang]

this car is my idol, i want to do this to my '99 v6 soooo bad! what is the website again?

[vsixstang]

@99ManMustang thank you for the good comment! the website is mysteedperformance

[lilpeyton290]

i got one identical to this and everything but not a 5speed but it still rips with the automatic

[iwanaGoFast2010]

i thought ford did away with the dash clock in 99

[vsixstang]

@iwanaGoFast2010

it is me who add

[hotshot101777]

@iwanaGoFast2010 they did cause my 99 v6 doesnt have that....

[jonasj828]

Can you send me the vacuum hose diagram pleasw

[jonsmotorsportss]

looks good glad to have tuned it lol

[jbn39]

Is there a reason why your supercharger isn't as loud or is it just the camera not picking it up as much? if there is what, because i'm not a fan of the whiny superchargers, but i am considering this as an option on my 3.8

[BeastV6Stang]

Sounds and looks sexy... I wish my was a 5-Speed but even though it's not could I still super charge it?

[vsixstang]

@BeastV6Stang yes no problem

[BeastV6Stang]

@vsixstang how much did this cost? i don't want to buy a gt like everyone else. i would rather have a 1 of a kind mustang in my town. in other words lots of stock v6 and gts and few cobras where i live

[vsixstang]

@BeastV6Stang will see on the website mysteedperformance

[turbonegro1120]

@BeastV6Stang yeah the auto is stronger than the manual

[BeastV6Stang]

@turbonegro1120 What do you mean?

[turbonegro1120]

@BeastV6Stang the automatic in the 99-04 mustangs the 4r70w is a very strong transmission, you find it in alot of 600+hp mustangs. so it will handle power better than the t-5 ever could

[BeastV6Stang]

@turbonegro1120 Haha sweet I just learned something new that's awesome. Thanks man I'll keep that in mind... was going to do a transmission swap until I read your comment. I'll keep the auto until my next car.

[turbonegro1120]

@BeastV6Stang yeah the t-5 is faster if your mustang its stock obviously, but if your going supercharged or turbo youll have to upgrade the manual a bit for the power. if you wanna make your auto a bit faster you can buy a different rearend gear like 4.10's and a shift kit for the tranny. just search it up.

[turbonegro1120]

@turbonegro1120 and even for you to see here: youtube dot com/watch?v=eeC7wpRfKpU ,he has the 4r70w(4 speed that came in the mustang) of course its heavily modded but it proves a point, you really dont need to waste money on a manual swap, they even sell kits where you can shift the auto like a manual without hurting the transmission.

[BeastV6Stang]

@turbonegro1120 I did some researh as you insisted and I only found 3.73 and 4.10's... I can't decide which one would be better for me... My Mustang is pretty much all stock except a CAI. I plan on changing that soon. Is their anything else I would have to change to put in the 4.10's or 3.73's and which one is better? Also I don't really care how many MPG I get, and my uncle and cousin are mechanics so installation isn't an issue I just want someone else's opinion not theirs.

[turbonegro1120]

@BeastV6Stang usually most auto guys(including myself) go with 4.10s and 3.73s for the manual. your right they only make 4.10s and 3.73s for the v6 axle. if your auto id definitely go with 4.10s. You should also but the traction lock, since that where the gears go youll have to take it apart anyway. buting the traction lock will make both your rear wheels get power not just 1. you might have a hard time getting traction with only one wheel with the 4.10's. youll also need a tuner since your

[turbonegro1120]

@BeastV6Stang speedo will be off with the new gear set. you could just but a recalibrater thing they sell to if you dont wanna pay for the tuner, but you can get free tunes from americanmuscle of you buy it there. so if you do get different gears definitely get the traction lock too at the same time.

[turbonegro1120]

@BeastV6Stang also you need to get the install kit too for the gears, is only like $70

[BeastV6Stang]

Diablo Gear kit is the only one that fits my 99 v6 $544.99 plus 7.5 t-lok $219.99 and $74.99 for the bearing kit. that's $800+ Installment like $200... yeah I'll be saving for a while lol

[turbonegro1120]

@BeastV6Stang yeah the price gets up there, i didnt even know there was a kit for the v6, where did you find that? im actually getting my gears and t-lock installed pretty soon. i still just need to get a tuner, im gonna go with the sct3 handheld from americanmuscle most likely

[BeastV6Stang]

@turbonegro1120 It's on American Muscle. It doesn't say that it's for the v6, but if you click on it, it says it will fit the v6 I'll send you the link and it comes with a tuner so save your money.

[turbonegro1120]

@BeastV6Stang yeah always better to look for a package deal to save some money

[tcg1986]

I figured it out, but dang those things are pricey and not as complex as the m90 SC thunderbird setup. Okay, if i go with this kit, dont i have to intercool?

u bought the kit or just the adapter?

[vsixstang]

@tcg1986 You can not intercooled adapter plate but not for that. You're better off buying the kit mysteed performance.

[tcg1986]

Thanks will do, how musch did it set u back?

[TheMrhoneycutt]

@tcg1986 mysteedperformance . com it is 3125.00 with shipping.You need a 25% Udp and a Tune the UDP should run about 225.00 and a Tune depending on where you get it should run around 200-500..And a Boost Gauge is also nice..And unless you like one wheel burnouts and literally no traction a T-Lok is a must!

[tcg1986]

gotta Q. What did u do to get the fitment did u have to make a intake cover or is there another method?

[vsixstang]

@tcg1986 Contact Nathan mysteed performance

[TheMrhoneycutt]

What kind of paint?What numbers are you seeing?

[whitestang99]

how many hp??

[vsixstang]

I painted the blower and pulley

[TheMrhoneycutt]

That is sick man!!Did you paint the Blower and Pulley?or are the pulleys aftermarket?

[steff04cobra]

Wow man, vraiment nice le setup! :D