once you rejet your carb you must adjust your mixture screw correct??? now where is the mixture screw located and does your carb need to be pulled off and taken apart to adjust it??? your knowledge would be greatly appreciated....btw i have an 06 wolverine 450 4x4
@HtownTom it is on the bottom of the carb....has a plug covering it....u will have to drill the plug 2 c the screw. I think it is in front of the bowl...don't drill 2 deep...just enough 2 Xpose the screw.
Mine's a 2010 and stock and I can get it up to 82 kms per hour. There is a speed limit adjuster on the bike and I haven't touched mine so it might go faster but I wouldn't be surprised if that was the top end.
anybody out there know if im supposed to re-jet my 2006 wolverine...i just purchased the hmf exhaust and im not sure...anyone with knowledge i would greatly appreciate it
@HtownTom you should always buy a jet kit if you get a new racing exhaust. or any kind of performance exhaust. if you dont it will make you engine run lean.
hey man nice quad i got all the same stuff done to my 08 but i put on some bigger itp tires and set them on some bad ass SS rims makes it look alot meaner.
any1 heard any thing bout the dyno-boost chips or anything.....if there a piece of crap or worth it......................or if you no of any other types of chips that are good.
Got it from ebay...just do a search for hmf exhaust wolverine 450....I paid around $210 with free shipping...make sure that it comes with spark arrestor and jet...u can also get them from HMF for around $260
I got HMF Pipe on mine too. 27" blackhorse tires on, its kind of too big it and it slowed down the speed to 49 mph. 2.5" wheel spacers are a joke, they break easy if you ride Alaska trails. Custom rearrack, toe hitch, new speedometer, rpm meter , engine thermometer, and other few adjustments.
I had to cut 1/2" off my HMF pipe(for 06') on to my 07' in order to make it fit on my bolts. Its good, they're pretty damn good for toeing heavy skiffs & trailers.
Same turns...and the same trouble....high RPM pops...I'm just liveN with it for now..might try to tweak it when I get sum time...let me know if ya figure it out.
Good quads...good speed/torque on trails...but if its wide open trails/roads ur only gonna top out around the 50s range...but who really needs that kinda speed on a woods trail anyway?
Bummer about the bolts man...maybe they changed things now...but mine did come with the bolts...yup...its the main jet...I had the same trouble ur haveN with those cheap screws...vise grips work very well....the mixture screw is under a brass cover...u'll have to drill it..go slow or u'll mess up the screw...its just a little thin cover.
I just bought a new Wolverine SE this past weekend. I put an HMF exhaust on it tonight. WHAT A SOUND!! WOW! One question though...Is it necessary to re-jet it or not?
That sounds great. The stock sound is weak. I have taken my 450 Wolverine 54mph on a street. The last few mph came very slow. That exhaust probably increases torque in the low range where you need it and you loose some at the high end. I weigh 240 pounds so it is a lot for the ATV to carry, yet it still got to 54mph
Got it from ebay...just do a search for hmf exhaust wolverine 450....I paid around $210 with free shipping...make sure that it comes with spark arrestor and jet...have phun! :)
How much cost an hmf pipe like yours ?
MrYamahaFrank 1 month ago
@MrYamahaFrank ...u can get 1 around $280.
ravenhoodtech 1 week ago
@ravenhoodtech Ok thanks :)
MrYamahaFrank 1 week ago
nice video i think it teaches some of our mechanically inclined friends a little more about atv's ive been riding them since i was 4 and now im 19
jax8181992 3 months ago
once you rejet your carb you must adjust your mixture screw correct??? now where is the mixture screw located and does your carb need to be pulled off and taken apart to adjust it??? your knowledge would be greatly appreciated....btw i have an 06 wolverine 450 4x4
HtownTom 7 months ago
@HtownTom it is on the bottom of the carb....has a plug covering it....u will have to drill the plug 2 c the screw. I think it is in front of the bowl...don't drill 2 deep...just enough 2 Xpose the screw.
ravenhoodtech 7 months ago
This has been flagged as spam show
what is a nice modification for this atv
thomassmth942 7 months ago
what is a nice modifocation for this atv
thomassmth942 7 months ago
what does the kn air filter do to the atv
ccmadmoney 8 months ago
@ccmadmoney better air flow...more horsepower...its washable/reusable
ravenhoodtech 7 months ago
Anybody j was just wondering what dies the k and n filter do to your quad cause I already have the hmf pipe
ccmadmoney 8 months ago
thats what my honda sounds like stock, listen to my video.
207445 8 months ago
Sounds Sweet!
CallMeSour 9 months ago
take that damn quiet core out and see the difference in spped you get my 650 rips
bigbone320 9 months ago
Is the stock model any good for casual trailing?
Zrod0964 1 year ago
@Zrod0964 yup....it's good 4 casual trail rideN 2
ravenhoodtech 1 year ago
how fast will it go without any mods
selfdestruct32 1 year ago
@selfdestruct32
Mine's a 2010 and stock and I can get it up to 82 kms per hour. There is a speed limit adjuster on the bike and I haven't touched mine so it might go faster but I wouldn't be surprised if that was the top end.
JamieSkerten 1 year ago
@selfdestruct32 might hit 50....I put larger tires on...so I'm lucky if I hit 50 downhill :)
ravenhoodtech 1 year ago
@ravenhoodtech umm... larger tires get a speed increase, not decrease
roksys69 9 months ago
@roksys69 not if the tires are heavy...weight slows ya down
ravenhoodtech 9 months ago
@ravenhoodtech for top speed it only helps..... trsut me
murts 9 months ago
This has been flagged as spam show
Looks and sounds awesome.
We sell A ton of these.
Good luck with it you will be more then happy..
Cloud Powersports
877.782.3722
CLOUDPOWERSPORTS 1 year ago
how much was that pipe im trying to put one on mine that sounds nice man
russell11141 1 year ago
@russell11141 ebay has them 4 under $250 free ship....have fun!
ravenhoodtech 1 year ago
can you get this for a 350?
nothinbeatsford 2 years ago
yup..check out the hmf website
ravenhoodtech 2 years ago
anybody out there know if im supposed to re-jet my 2006 wolverine...i just purchased the hmf exhaust and im not sure...anyone with knowledge i would greatly appreciate it
HtownTom 2 years ago
yup....get the max power! Takes a little work...but it's worth it. Have fun!
ravenhoodtech 2 years ago
@HtownTom you should always buy a jet kit if you get a new racing exhaust. or any kind of performance exhaust. if you dont it will make you engine run lean.
dyingtolive35 1 year ago
im looking to buy one for my 06 wolverine 450 4x4...any one know a good start??/ LET ME KNOW PLZ
HtownTom 2 years ago
@HtownTom thats a damn good bike dude. 4x4 sport automatic. trail machine! my GFs family has one and it is a dream ride in the woods
MrSweetleaf92 1 year ago 2
is the power gain noticeable
mrselvie 2 years ago
dude this video is driving me nuts. i just got my hmf waiting for install, im stoked great video man the hmf sounds so smooth but so hard
esconastynas 2 years ago
if you take baffle out it will mess up your valves aftermarket is the way to go
hondarider1234567 2 years ago
ya u could take out the tip and filter and take the air box top out and its faster....
kingkevin2594 2 years ago
Comment removed
paigeyypie 2 years ago
Comment removed
Mudvayne2010 2 years ago
hey man nice quad i got all the same stuff done to my 08 but i put on some bigger itp tires and set them on some bad ass SS rims makes it look alot meaner.
teamyamaha2009 2 years ago
my wolverine sounds jest like the hmf because the stock pipe has to exhaust tips take 1 out and ur loud...and deep
kingkevin2594 2 years ago
does that relly work
jayc888x 2 years ago
anyone no wat a vector would do on a HMF exhaust?
miltonbk45 2 years ago
Sounds just like the video. Wish I got a downturn tip, so at least the ground could absorb some of the sound.
assmunchower 2 years ago
I KNO I LIKE THT DEEP LOUD SOUND like when some racers go down ur strret in a mustang boss
sumblocka 2 years ago
do you need to jet it. i just bought this pipe and i can't afford a jet kit right now. so i was just wondering if i could ride it with out jetting it
JacHell666 2 years ago
jet kits are only 100$ for one cuz i got one on mine and ya you need 2
miltonbk45 2 years ago
what jet did u have in it before the 145?
QUADsK8ER97 2 years ago
Anyone got any ideas of wat else i could do 2 mine i got a HMF pipe, jet kit,and a K&N air filter .
miltonbk45 2 years ago
any1 heard any thing bout the dyno-boost chips or anything.....if there a piece of crap or worth it......................or if you no of any other types of chips that are good.
miltonbk45 2 years ago
definitly pipe it
miltonbk45 2 years ago
hey man i got a 08 wolverine 450 its pretty sweet. how much did all that cost you?
wttu 3 years ago
Got it from ebay...just do a search for hmf exhaust wolverine 450....I paid around $210 with free shipping...make sure that it comes with spark arrestor and jet...u can also get them from HMF for around $260
ravenhoodtech 2 years ago
sweet pipe man!!! I got a wolwerine to where did you get that pipe???
jayc888x 3 years ago
Got mine on ebay
ravenhoodtech 2 years ago
sweet
jayc888x 2 years ago
Pipe it
ravenhoodtech 3 years ago
I got HMF Pipe on mine too. 27" blackhorse tires on, its kind of too big it and it slowed down the speed to 49 mph. 2.5" wheel spacers are a joke, they break easy if you ride Alaska trails. Custom rearrack, toe hitch, new speedometer, rpm meter , engine thermometer, and other few adjustments.
I had to cut 1/2" off my HMF pipe(for 06') on to my 07' in order to make it fit on my bolts. Its good, they're pretty damn good for toeing heavy skiffs & trailers.
fr3ak0s 3 years ago
ya wolverines are pretty good quads
you guys got any rims on yours
boykole 3 years ago
U'll like those wheel spacers...I have the 1.5"...and replaced the stock tires with Dirt Devil 2s...let me know how the Dynojet goes
ravenhoodtech 3 years ago
Let me know how it does...I might just do the same.
ravenhoodtech 3 years ago
Same turns...and the same trouble....high RPM pops...I'm just liveN with it for now..might try to tweak it when I get sum time...let me know if ya figure it out.
ravenhoodtech 3 years ago
are wolverines anygood of quads are they fast?
Korgizin 3 years ago
Good quads...good speed/torque on trails...but if its wide open trails/roads ur only gonna top out around the 50s range...but who really needs that kinda speed on a woods trail anyway?
ravenhoodtech 3 years ago
Bummer about the bolts man...maybe they changed things now...but mine did come with the bolts...yup...its the main jet...I had the same trouble ur haveN with those cheap screws...vise grips work very well....the mixture screw is under a brass cover...u'll have to drill it..go slow or u'll mess up the screw...its just a little thin cover.
ravenhoodtech 3 years ago
New bolts that came with pipe...and jetted it right away....It's best to rejet.
ravenhoodtech 3 years ago
I just bought a new Wolverine SE this past weekend. I put an HMF exhaust on it tonight. WHAT A SOUND!! WOW! One question though...Is it necessary to re-jet it or not?
Tonyr0206 3 years ago
no you dont need to
huntfish1993 3 years ago
i would
Knewsance666 3 years ago
take the baffle out i did on my 250x and theres a noticable increase of power
250xrider1 3 years ago
That sounds great. The stock sound is weak. I have taken my 450 Wolverine 54mph on a street. The last few mph came very slow. That exhaust probably increases torque in the low range where you need it and you loose some at the high end. I weigh 240 pounds so it is a lot for the ATV to carry, yet it still got to 54mph
justbigsteve 3 years ago
i have gotten my 350 on dirt 58mph, and i way 190. there might be something wrong with yours
thuger91 3 years ago
listen to my raptor lol
ridna660r 4 years ago
How loud would you say it is?
pimpedout8888888 4 years ago
where did u get it and how much sounds sweet
kevinchand1245 4 years ago
Got it from ebay...just do a search for hmf exhaust wolverine 450....I paid around $210 with free shipping...make sure that it comes with spark arrestor and jet...have phun! :)
ravenhoodtech 4 years ago
do you know if this pipe would fit on an 08 grizzly 400
XxJamieOvertonxX 4 years ago
wow 50MPH
thats sad
i have a stock 2000 wolverine 350 and can get 65-70 no problem and its all time 4x4
greentea223 4 years ago
Ur not gonna do 65-70 on a trail anyway...
ravenhoodtech 4 years ago
thats impossible for a 350 to go 70 mph stock unless its a banshee and even that would have trouble going that fast stock. ur a liar
kloostra93 3 years ago
was that a slip on or full system?
tang347 4 years ago
Slip on
ravenhoodtech 4 years ago
greta sound
DarrenWS6 4 years ago
how fast can u get it at? .. i got a 07 wolvie 2 and i can get 83km/h
JiggMan258 4 years ago
I'm lucky 2 get it past 50mph
ravenhoodtech 4 years ago
did the jet come with the pipe?
JiggMan258 4 years ago
yeah...it came with a #145 jet
ravenhoodtech 4 years ago
Sounds damn good. I have an 06 wolverine that I just put a HMF pipe on, Im just waiting to get my dynojet kit before I can take it for a spin.
langford2002 4 years ago